Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
/*
 * Copyright (c) 2017 Jean-Paul Etienne <fractalclone@gmail.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <kernel.h>
#include <arch/cpu.h>
#include <device.h>
#include <system_timer.h>
#include <board.h>

typedef struct {
	uint32_t val_low;
	uint32_t val_high;
} riscv_machine_timer_t;

static volatile riscv_machine_timer_t *mtime =
	(riscv_machine_timer_t *)RISCV_MTIME_BASE;
static volatile riscv_machine_timer_t *mtimecmp =
	(riscv_machine_timer_t *)RISCV_MTIMECMP_BASE;

static uint32_t accumulated_cycle_count;
static uint64_t last_rtc_value;

/*
 * The RISCV machine-mode timer is a one shot timer that needs to be rearm upon
 * every interrupt. Timer clock is a 64-bits ART.
 * To arm timer, we need to read the RTC value and update the
 * timer compare register by the RTC value + time interval we want timer
 * to interrupt.
 */
static ALWAYS_INLINE void riscv_machine_rearm_timer(void)
{
	uint64_t rtc;

	/*
	 * Following machine-mode timer implementation in QEMU, the actual
	 * RTC read is performed when reading low timer value register.
	 * Reading high timer value just reads the most significant 32-bits
	 * of a cache value, obtained from a previous read to the low
	 * timer value register. Hence, always read timer->val_low first.
	 * This also works for other implementations.
	 */
	rtc = mtime->val_low;
	rtc |= ((uint64_t)mtime->val_high << 32);
	last_rtc_value = rtc;

	/*
	 * Rearm timer to generate an interrupt after
	 * sys_clock_hw_cycles_per_tick
	 */
	rtc += sys_clock_hw_cycles_per_tick;
	mtimecmp->val_low = (uint32_t)(rtc & 0xffffffff);
	mtimecmp->val_high = (uint32_t)((rtc >> 32) & 0xffffffff);
}

static void riscv_machine_timer_irq_handler(void *unused)
{
	ARG_UNUSED(unused);

	accumulated_cycle_count += sys_clock_hw_cycles_per_tick;

	_sys_clock_tick_announce();

	/* Rearm timer */
	riscv_machine_rearm_timer();
}

#ifdef CONFIG_TICKLESS_IDLE
#error "Tickless idle not yet implemented for riscv-machine timer"
#endif

int _sys_clock_driver_init(struct device *device)
{
	ARG_UNUSED(device);

	IRQ_CONNECT(RISCV_MACHINE_TIMER_IRQ, 0,
		    riscv_machine_timer_irq_handler, NULL, 0);

	irq_enable(RISCV_MACHINE_TIMER_IRQ);

	/* Initialize timer, just call riscv_machine_rearm_timer */
	riscv_machine_rearm_timer();

	return 0;
}

/**
 *
 * @brief Read the platform's timer hardware
 *
 * This routine returns the current time in terms of timer hardware clock
 * cycles.
 *
 * @return up counter of elapsed clock cycles
 */
uint32_t k_cycle_get_32(void)
{
	uint64_t rtc;

	rtc = mtime->val_low;
	rtc |= ((uint64_t)mtime->val_high << 32);

	/* rtc - last_rtc_value is always <= sys_clock_hw_cycles_per_tick */
	return accumulated_cycle_count + (uint32_t)(rtc - last_rtc_value);
}