Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * drivers/media/radio/si4713-i2c.c
 *
 * Silicon Labs Si4713 FM Radio Transmitter I2C commands.
 *
 * Copyright (c) 2009 Nokia Corporation
 * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
 */

#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-common.h>

#include "si4713.h"

/* module parameters */
static int debug;
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug level (0 - 2)");

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
MODULE_VERSION("0.0.1");

#define DEFAULT_RDS_PI			0x00
#define DEFAULT_RDS_PTY			0x00
#define DEFAULT_RDS_DEVIATION		0x00C8
#define DEFAULT_RDS_PS_REPEAT_COUNT	0x0003
#define DEFAULT_LIMITER_RTIME		0x1392
#define DEFAULT_LIMITER_DEV		0x102CA
#define DEFAULT_PILOT_FREQUENCY		0x4A38
#define DEFAULT_PILOT_DEVIATION		0x1A5E
#define DEFAULT_ACOMP_ATIME		0x0000
#define DEFAULT_ACOMP_RTIME		0xF4240L
#define DEFAULT_ACOMP_GAIN		0x0F
#define DEFAULT_ACOMP_THRESHOLD		(-0x28)
#define DEFAULT_MUTE			0x01
#define DEFAULT_POWER_LEVEL		88
#define DEFAULT_FREQUENCY		8800
#define DEFAULT_PREEMPHASIS		FMPE_EU
#define DEFAULT_TUNE_RNL		0xFF

#define to_si4713_device(sd)	container_of(sd, struct si4713_device, sd)

/* frequency domain transformation (using times 10 to avoid floats) */
#define FREQDEV_UNIT	100000
#define FREQV4L2_MULTI	625
#define si4713_to_v4l2(f)	((f * FREQDEV_UNIT) / FREQV4L2_MULTI)
#define v4l2_to_si4713(f)	((f * FREQV4L2_MULTI) / FREQDEV_UNIT)
#define FREQ_RANGE_LOW			7600
#define FREQ_RANGE_HIGH			10800

#define MAX_ARGS 7

#define RDS_BLOCK			8
#define RDS_BLOCK_CLEAR			0x03
#define RDS_BLOCK_LOAD			0x04
#define RDS_RADIOTEXT_2A		0x20
#define RDS_RADIOTEXT_BLK_SIZE		4
#define RDS_RADIOTEXT_INDEX_MAX		0x0F
#define RDS_CARRIAGE_RETURN		0x0D

#define rds_ps_nblocks(len)	((len / RDS_BLOCK) + (len % RDS_BLOCK ? 1 : 0))

#define get_status_bit(p, b, m)	(((p) & (m)) >> (b))
#define set_bits(p, v, b, m)	(((p) & ~(m)) | ((v) << (b)))

#define ATTACK_TIME_UNIT	500

#define POWER_OFF			0x00
#define POWER_ON			0x01

#define msb(x)                  ((u8)((u16) x >> 8))
#define lsb(x)                  ((u8)((u16) x &  0x00FF))
#define compose_u16(msb, lsb)	(((u16)msb << 8) | lsb)
#define check_command_failed(status)	(!(status & SI4713_CTS) || \
					(status & SI4713_ERR))
/* mute definition */
#define set_mute(p)	(((p) & 1) | (((p) & 1) << 1))

#ifdef DEBUG
#define DBG_BUFFER(device, message, buffer, size)			\
	{								\
		int i;							\
		char str[(size)*5];					\
		for (i = 0; i < size; i++)				\
			sprintf(str + i * 5, " 0x%02x", buffer[i]);	\
		v4l2_dbg(2, debug, device, "%s:%s\n", message, str);	\
	}
#else
#define DBG_BUFFER(device, message, buffer, size)
#endif

/*
 * Values for limiter release time (sorted by second column)
 *	device	release
 *	value	time (us)
 */
static long limiter_times[] = {
	2000,	250,
	1000,	500,
	510,	1000,
	255,	2000,
	170,	3000,
	127,	4020,
	102,	5010,
	85,	6020,
	73,	7010,
	64,	7990,
	57,	8970,
	51,	10030,
	25,	20470,
	17,	30110,
	13,	39380,
	10,	51190,
	8,	63690,
	7,	73140,
	6,	85330,
	5,	102390,
};

/*
 * Values for audio compression release time (sorted by second column)
 *	device	release
 *	value	time (us)
 */
static unsigned long acomp_rtimes[] = {
	0,	100000,
	1,	200000,
	2,	350000,
	3,	525000,
	4,	1000000,
};

/*
 * Values for preemphasis (sorted by second column)
 *	device	preemphasis
 *	value	value (v4l2)
 */
static unsigned long preemphasis_values[] = {
	FMPE_DISABLED,	V4L2_PREEMPHASIS_DISABLED,
	FMPE_EU,	V4L2_PREEMPHASIS_50_uS,
	FMPE_USA,	V4L2_PREEMPHASIS_75_uS,
};

static int usecs_to_dev(unsigned long usecs, unsigned long const array[],
			int size)
{
	int i;
	int rval = -EINVAL;

	for (i = 0; i < size / 2; i++)
		if (array[(i * 2) + 1] >= usecs) {
			rval = array[i * 2];
			break;
		}

	return rval;
}

/* si4713_handler: IRQ handler, just complete work */
static irqreturn_t si4713_handler(int irq, void *dev)
{
	struct si4713_device *sdev = dev;

	v4l2_dbg(2, debug, &sdev->sd,
			"%s: sending signal to completion work.\n", __func__);
	complete(&sdev->work);

	return IRQ_HANDLED;
}

/*
 * si4713_send_command - sends a command to si4713 and waits its response
 * @sdev: si4713_device structure for the device we are communicating
 * @command: command id
 * @args: command arguments we are sending (up to 7)
 * @argn: actual size of @args
 * @response: buffer to place the expected response from the device (up to 15)
 * @respn: actual size of @response
 * @usecs: amount of time to wait before reading the response (in usecs)
 */
static int si4713_send_command(struct si4713_device *sdev, const u8 command,
				const u8 args[], const int argn,
				u8 response[], const int respn, const int usecs)
{
	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
	unsigned long until_jiffies;
	u8 data1[MAX_ARGS + 1];
	int err;

	if (!client->adapter)
		return -ENODEV;

	/* First send the command and its arguments */
	data1[0] = command;
	memcpy(data1 + 1, args, argn);
	DBG_BUFFER(&sdev->sd, "Parameters", data1, argn + 1);

	err = i2c_master_send(client, data1, argn + 1);
	if (err != argn + 1) {
		v4l2_err(&sdev->sd, "Error while sending command 0x%02x\n",
			command);
		return err < 0 ? err : -EIO;
	}

	until_jiffies = jiffies + usecs_to_jiffies(usecs) + 1;

	/* Wait response from interrupt */
	if (client->irq) {
		if (!wait_for_completion_timeout(&sdev->work,
				usecs_to_jiffies(usecs) + 1))
			v4l2_warn(&sdev->sd,
				"(%s) Device took too much time to answer.\n",
				__func__);
	}

	do {
		err = i2c_master_recv(client, response, respn);
		if (err != respn) {
			v4l2_err(&sdev->sd,
				"Error %d while reading response for command 0x%02x\n",
				err, command);
			return err < 0 ? err : -EIO;
		}

		DBG_BUFFER(&sdev->sd, "Response", response, respn);
		if (!check_command_failed(response[0]))
			return 0;

		if (client->irq)
			return -EBUSY;
		if (usecs <= 1000)
			usleep_range(usecs, 1000);
		else
			usleep_range(1000, 2000);
	} while (time_is_after_jiffies(until_jiffies));

	return -EBUSY;
}

/*
 * si4713_read_property - reads a si4713 property
 * @sdev: si4713_device structure for the device we are communicating
 * @prop: property identification number
 * @pv: property value to be returned on success
 */
static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
{
	int err;
	u8 val[SI4713_GET_PROP_NRESP];
	/*
	 *	.First byte = 0
	 *	.Second byte = property's MSB
	 *	.Third byte = property's LSB
	 */
	const u8 args[SI4713_GET_PROP_NARGS] = {
		0x00,
		msb(prop),
		lsb(prop),
	};

	err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY,
				  args, ARRAY_SIZE(args), val,
				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);

	if (err < 0)
		return err;

	*pv = compose_u16(val[2], val[3]);

	v4l2_dbg(1, debug, &sdev->sd,
			"%s: property=0x%02x value=0x%02x status=0x%02x\n",
			__func__, prop, *pv, val[0]);

	return err;
}

/*
 * si4713_write_property - modifies a si4713 property
 * @sdev: si4713_device structure for the device we are communicating
 * @prop: property identification number
 * @val: new value for that property
 */
static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
{
	int rval;
	u8 resp[SI4713_SET_PROP_NRESP];
	/*
	 *	.First byte = 0
	 *	.Second byte = property's MSB
	 *	.Third byte = property's LSB
	 *	.Fourth byte = value's MSB
	 *	.Fifth byte = value's LSB
	 */
	const u8 args[SI4713_SET_PROP_NARGS] = {
		0x00,
		msb(prop),
		lsb(prop),
		msb(val),
		lsb(val),
	};

	rval = si4713_send_command(sdev, SI4713_CMD_SET_PROPERTY,
					args, ARRAY_SIZE(args),
					resp, ARRAY_SIZE(resp),
					DEFAULT_TIMEOUT);

	if (rval < 0)
		return rval;

	v4l2_dbg(1, debug, &sdev->sd,
			"%s: property=0x%02x value=0x%02x status=0x%02x\n",
			__func__, prop, val, resp[0]);

	/*
	 * As there is no command response for SET_PROPERTY,
	 * wait Tcomp time to finish before proceed, in order
	 * to have property properly set.
	 */
	msleep(TIMEOUT_SET_PROPERTY);

	return rval;
}

/*
 * si4713_powerup - Powers the device up
 * @sdev: si4713_device structure for the device we are communicating
 */
static int si4713_powerup(struct si4713_device *sdev)
{
	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
	int err;
	u8 resp[SI4713_PWUP_NRESP];
	/*
	 *	.First byte = Enabled interrupts and boot function
	 *	.Second byte = Input operation mode
	 */
	u8 args[SI4713_PWUP_NARGS] = {
		SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
		SI4713_PWUP_OPMOD_ANALOG,
	};

	if (sdev->power_state)
		return 0;

	if (sdev->vdd) {
		err = regulator_enable(sdev->vdd);
		if (err) {
			v4l2_err(&sdev->sd, "Failed to enable vdd: %d\n", err);
			return err;
		}
	}

	if (sdev->vio) {
		err = regulator_enable(sdev->vio);
		if (err) {
			v4l2_err(&sdev->sd, "Failed to enable vio: %d\n", err);
			return err;
		}
	}

	if (sdev->gpio_reset) {
		udelay(50);
		gpiod_set_value(sdev->gpio_reset, 1);
	}

	if (client->irq)
		args[0] |= SI4713_PWUP_CTSIEN;

	err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
					args, ARRAY_SIZE(args),
					resp, ARRAY_SIZE(resp),
					TIMEOUT_POWER_UP);

	if (!err) {
		v4l2_dbg(1, debug, &sdev->sd, "Powerup response: 0x%02x\n",
				resp[0]);
		v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n");
		sdev->power_state = POWER_ON;

		if (client->irq)
			err = si4713_write_property(sdev, SI4713_GPO_IEN,
						SI4713_STC_INT | SI4713_CTS);
		return err;
	}
	gpiod_set_value(sdev->gpio_reset, 0);


	if (sdev->vdd) {
		err = regulator_disable(sdev->vdd);
		if (err)
			v4l2_err(&sdev->sd, "Failed to disable vdd: %d\n", err);
	}

	if (sdev->vio) {
		err = regulator_disable(sdev->vio);
		if (err)
			v4l2_err(&sdev->sd, "Failed to disable vio: %d\n", err);
	}

	return err;
}

/*
 * si4713_powerdown - Powers the device down
 * @sdev: si4713_device structure for the device we are communicating
 */
static int si4713_powerdown(struct si4713_device *sdev)
{
	int err;
	u8 resp[SI4713_PWDN_NRESP];

	if (!sdev->power_state)
		return 0;

	err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN,
					NULL, 0,
					resp, ARRAY_SIZE(resp),
					DEFAULT_TIMEOUT);

	if (!err) {
		v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
				resp[0]);
		v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
		if (sdev->gpio_reset)
			gpiod_set_value(sdev->gpio_reset, 0);

		if (sdev->vdd) {
			err = regulator_disable(sdev->vdd);
			if (err) {
				v4l2_err(&sdev->sd,
					"Failed to disable vdd: %d\n", err);
			}
		}

		if (sdev->vio) {
			err = regulator_disable(sdev->vio);
			if (err) {
				v4l2_err(&sdev->sd,
					"Failed to disable vio: %d\n", err);
			}
		}
		sdev->power_state = POWER_OFF;
	}

	return err;
}

/*
 * si4713_checkrev - Checks if we are treating a device with the correct rev.
 * @sdev: si4713_device structure for the device we are communicating
 */
static int si4713_checkrev(struct si4713_device *sdev)
{
	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
	int rval;
	u8 resp[SI4713_GETREV_NRESP];

	rval = si4713_send_command(sdev, SI4713_CMD_GET_REV,
					NULL, 0,
					resp, ARRAY_SIZE(resp),
					DEFAULT_TIMEOUT);

	if (rval < 0)
		return rval;

	if (resp[1] == SI4713_PRODUCT_NUMBER) {
		v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n",
				client->addr << 1, client->adapter->name);
	} else {
		v4l2_err(&sdev->sd, "Invalid product number 0x%X\n", resp[1]);
		rval = -EINVAL;
	}
	return rval;
}

/*
 * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
 *		     for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
 * @sdev: si4713_device structure for the device we are communicating
 * @usecs: timeout to wait for STC interrupt signal
 */
static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
{
	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
	u8 resp[SI4713_GET_STATUS_NRESP];
	unsigned long start_jiffies = jiffies;
	int err;

	if (client->irq &&
	    !wait_for_completion_timeout(&sdev->work, usecs_to_jiffies(usecs) + 1))
		v4l2_warn(&sdev->sd,
			"(%s) Device took too much time to answer.\n", __func__);

	for (;;) {
		/* Clear status bits */
		err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS,
				NULL, 0,
				resp, ARRAY_SIZE(resp),
				DEFAULT_TIMEOUT);
		/* The USB device returns errors when it waits for the
		 * STC bit to be set. Hence polling */
		if (err >= 0) {
			v4l2_dbg(1, debug, &sdev->sd,
				"%s: status bits: 0x%02x\n", __func__, resp[0]);

			if (resp[0] & SI4713_STC_INT)
				return 0;
		}
		if (jiffies_to_usecs(jiffies - start_jiffies) > usecs)
			return err < 0 ? err : -EIO;
		/* We sleep here for 3-4 ms in order to avoid flooding the device
		 * with USB requests. The si4713 USB driver was developed
		 * by reverse engineering the Windows USB driver. The windows
		 * driver also has a ~2.5 ms delay between responses. */
		usleep_range(3000, 4000);
	}
}

/*
 * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
 *			frequency between 76 and 108 MHz in 10 kHz units and
 *			steps of 50 kHz.
 * @sdev: si4713_device structure for the device we are communicating
 * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
 */
static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
{
	int err;
	u8 val[SI4713_TXFREQ_NRESP];
	/*
	 *	.First byte = 0
	 *	.Second byte = frequency's MSB
	 *	.Third byte = frequency's LSB
	 */
	const u8 args[SI4713_TXFREQ_NARGS] = {
		0x00,
		msb(frequency),
		lsb(frequency),
	};

	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ,
				  args, ARRAY_SIZE(args), val,
				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);

	if (err < 0)
		return err;

	v4l2_dbg(1, debug, &sdev->sd,
			"%s: frequency=0x%02x status=0x%02x\n", __func__,
			frequency, val[0]);

	err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
	if (err < 0)
		return err;

	return compose_u16(args[1], args[2]);
}

/*
 * si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in
 *			1 dB units. A value of 0x00 indicates off. The command
 *			also sets the antenna tuning capacitance. A value of 0
 *			indicates autotuning, and a value of 1 - 191 indicates
 *			a manual override, which results in a tuning
 *			capacitance of 0.25 pF x @antcap.
 * @sdev: si4713_device structure for the device we are communicating
 * @power: tuning power (88 - 120 dBuV, unit/step 1 dB)
 * @antcap: value of antenna tuning capacitor (0 - 191)
 */
static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
				u8 antcap)
{
	int err;
	u8 val[SI4713_TXPWR_NRESP];
	/*
	 *	.First byte = 0
	 *	.Second byte = 0
	 *	.Third byte = power
	 *	.Fourth byte = antcap
	 */
	u8 args[SI4713_TXPWR_NARGS] = {
		0x00,
		0x00,
		power,
		antcap,
	};

	/* Map power values 1-87 to MIN_POWER (88) */
	if (power > 0 && power < SI4713_MIN_POWER)
		args[2] = power = SI4713_MIN_POWER;

	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
				  args, ARRAY_SIZE(args), val,
				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);

	if (err < 0)
		return err;

	v4l2_dbg(1, debug, &sdev->sd,
			"%s: power=0x%02x antcap=0x%02x status=0x%02x\n",
			__func__, power, antcap, val[0]);

	return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
}

/*
 * si4713_tx_tune_measure - Enters receive mode and measures the received noise
 *			level in units of dBuV on the selected frequency.
 *			The Frequency must be between 76 and 108 MHz in 10 kHz
 *			units and steps of 50 kHz. The command also sets the
 *			antenna	tuning capacitance. A value of 0 means
 *			autotuning, and a value of 1 to 191 indicates manual
 *			override.
 * @sdev: si4713_device structure for the device we are communicating
 * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
 * @antcap: value of antenna tuning capacitor (0 - 191)
 */
static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
					u8 antcap)
{
	int err;
	u8 val[SI4713_TXMEA_NRESP];
	/*
	 *	.First byte = 0
	 *	.Second byte = frequency's MSB
	 *	.Third byte = frequency's LSB
	 *	.Fourth byte = antcap
	 */
	const u8 args[SI4713_TXMEA_NARGS] = {
		0x00,
		msb(frequency),
		lsb(frequency),
		antcap,
	};

	sdev->tune_rnl = DEFAULT_TUNE_RNL;

	if (antcap > SI4713_MAX_ANTCAP)
		return -EDOM;

	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_MEASURE,
				  args, ARRAY_SIZE(args), val,
				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);

	if (err < 0)
		return err;

	v4l2_dbg(1, debug, &sdev->sd,
			"%s: frequency=0x%02x antcap=0x%02x status=0x%02x\n",
			__func__, frequency, antcap, val[0]);

	return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
}

/*
 * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
 *			tx_tune_power commands. This command return the current
 *			frequency, output voltage in dBuV, the antenna tunning
 *			capacitance value and the received noise level. The
 *			command also clears the stcint interrupt bit when the
 *			first bit of its arguments is high.
 * @sdev: si4713_device structure for the device we are communicating
 * @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
 * @frequency: returned frequency
 * @power: returned power
 * @antcap: returned antenna capacitance
 * @noise: returned noise level
 */
static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
					u16 *frequency,	u8 *power,
					u8 *antcap, u8 *noise)
{
	int err;
	u8 val[SI4713_TXSTATUS_NRESP];
	/*
	 *	.First byte = intack bit
	 */
	const u8 args[SI4713_TXSTATUS_NARGS] = {
		intack & SI4713_INTACK_MASK,
	};

	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS,
				  args, ARRAY_SIZE(args), val,
				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);

	if (!err) {
		v4l2_dbg(1, debug, &sdev->sd,
			"%s: status=0x%02x\n", __func__, val[0]);
		*frequency = compose_u16(val[2], val[3]);
		sdev->frequency = *frequency;
		*power = val[5];
		*antcap = val[6];
		*noise = val[7];
		v4l2_dbg(1, debug, &sdev->sd,
			 "%s: response: %d x 10 kHz (power %d, antcap %d, rnl %d)\n",
			 __func__, *frequency, *power, *antcap, *noise);
	}

	return err;
}

/*
 * si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer.
 * @sdev: si4713_device structure for the device we are communicating
 * @mode: the buffer operation mode.
 * @rdsb: RDS Block B
 * @rdsc: RDS Block C
 * @rdsd: RDS Block D
 * @cbleft: returns the number of available circular buffer blocks minus the
 *          number of used circular buffer blocks.
 */
static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
				u16 rdsc, u16 rdsd, s8 *cbleft)
{
	int err;
	u8 val[SI4713_RDSBUFF_NRESP];

	const u8 args[SI4713_RDSBUFF_NARGS] = {
		mode & SI4713_RDSBUFF_MODE_MASK,
		msb(rdsb),
		lsb(rdsb),
		msb(rdsc),
		lsb(rdsc),
		msb(rdsd),
		lsb(rdsd),
	};

	err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF,
				  args, ARRAY_SIZE(args), val,
				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);

	if (!err) {
		v4l2_dbg(1, debug, &sdev->sd,
			"%s: status=0x%02x\n", __func__, val[0]);
		*cbleft = (s8)val[2] - val[3];
		v4l2_dbg(1, debug, &sdev->sd,
			 "%s: response: interrupts 0x%02x cb avail: %d cb used %d fifo avail %d fifo used %d\n",
			 __func__, val[1], val[2], val[3], val[4], val[5]);
	}

	return err;
}

/*
 * si4713_tx_rds_ps - Loads the program service buffer.
 * @sdev: si4713_device structure for the device we are communicating
 * @psid: program service id to be loaded.
 * @pschar: assumed 4 size char array to be loaded into the program service
 */
static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid,
				unsigned char *pschar)
{
	int err;
	u8 val[SI4713_RDSPS_NRESP];

	const u8 args[SI4713_RDSPS_NARGS] = {
		psid & SI4713_RDSPS_PSID_MASK,
		pschar[0],
		pschar[1],
		pschar[2],
		pschar[3],
	};

	err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS,
				  args, ARRAY_SIZE(args), val,
				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);

	if (err < 0)
		return err;

	v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]);

	return err;
}

static int si4713_set_power_state(struct si4713_device *sdev, u8 value)
{
	if (value)
		return si4713_powerup(sdev);
	return si4713_powerdown(sdev);
}

static int si4713_set_mute(struct si4713_device *sdev, u16 mute)
{
	int rval = 0;

	mute = set_mute(mute);

	if (sdev->power_state)
		rval = si4713_write_property(sdev,
				SI4713_TX_LINE_INPUT_MUTE, mute);

	return rval;
}

static int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name)
{
	int rval = 0, i;
	u8 len = 0;

	/* We want to clear the whole thing */
	if (!strlen(ps_name))
		memset(ps_name, 0, MAX_RDS_PS_NAME + 1);

	if (sdev->power_state) {
		/* Write the new ps name and clear the padding */
		for (i = 0; i < MAX_RDS_PS_NAME; i += (RDS_BLOCK / 2)) {
			rval = si4713_tx_rds_ps(sdev, (i / (RDS_BLOCK / 2)),
						ps_name + i);
			if (rval < 0)
				return rval;
		}

		/* Setup the size to be sent */
		if (strlen(ps_name))
			len = strlen(ps_name) - 1;
		else
			len = 1;

		rval = si4713_write_property(sdev,
				SI4713_TX_RDS_PS_MESSAGE_COUNT,
				rds_ps_nblocks(len));
		if (rval < 0)
			return rval;

		rval = si4713_write_property(sdev,
				SI4713_TX_RDS_PS_REPEAT_COUNT,
				DEFAULT_RDS_PS_REPEAT_COUNT * 2);
		if (rval < 0)
			return rval;
	}

	return rval;
}

static int si4713_set_rds_radio_text(struct si4713_device *sdev, const char *rt)
{
	static const char cr[RDS_RADIOTEXT_BLK_SIZE] = { RDS_CARRIAGE_RETURN, 0 };
	int rval = 0, i;
	u16 t_index = 0;
	u8 b_index = 0, cr_inserted = 0;
	s8 left;

	if (!sdev->power_state)
		return rval;

	rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_CLEAR, 0, 0, 0, &left);
	if (rval < 0)
		return rval;

	if (!strlen(rt))
		return rval;

	do {
		/* RDS spec says that if the last block isn't used,
		 * then apply a carriage return
		 */
		if (t_index < (RDS_RADIOTEXT_INDEX_MAX * RDS_RADIOTEXT_BLK_SIZE)) {
			for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) {
				if (!rt[t_index + i] ||
				    rt[t_index + i] == RDS_CARRIAGE_RETURN) {
					rt = cr;
					cr_inserted = 1;
					break;
				}
			}
		}

		rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_LOAD,
				compose_u16(RDS_RADIOTEXT_2A, b_index++),
				compose_u16(rt[t_index], rt[t_index + 1]),
				compose_u16(rt[t_index + 2], rt[t_index + 3]),
				&left);
		if (rval < 0)
			return rval;

		t_index += RDS_RADIOTEXT_BLK_SIZE;

		if (cr_inserted)
			break;
	} while (left > 0);

	return rval;
}

/*
 * si4713_update_tune_status - update properties from tx_tune_status
 * command. Must be called with sdev->mutex held.
 * @sdev: si4713_device structure for the device we are communicating
 */
static int si4713_update_tune_status(struct si4713_device *sdev)
{
	int rval;
	u16 f = 0;
	u8 p = 0, a = 0, n = 0;

	rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);

	if (rval < 0)
		goto exit;

/*	TODO: check that power_level and antenna_capacitor really are not
	changed by the hardware. If they are, then these controls should become
	volatiles.
	sdev->power_level = p;
	sdev->antenna_capacitor = a;*/
	sdev->tune_rnl = n;

exit:
	return rval;
}

static int si4713_choose_econtrol_action(struct si4713_device *sdev, u32 id,
		s32 *bit, s32 *mask, u16 *property, int *mul,
		unsigned long **table, int *size)
{
	s32 rval = 0;

	switch (id) {
	/* FM_TX class controls */
	case V4L2_CID_RDS_TX_PI:
		*property = SI4713_TX_RDS_PI;
		*mul = 1;
		break;
	case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
		*property = SI4713_TX_ACOMP_THRESHOLD;
		*mul = 1;
		break;
	case V4L2_CID_AUDIO_COMPRESSION_GAIN:
		*property = SI4713_TX_ACOMP_GAIN;
		*mul = 1;
		break;
	case V4L2_CID_PILOT_TONE_FREQUENCY:
		*property = SI4713_TX_PILOT_FREQUENCY;
		*mul = 1;
		break;
	case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
		*property = SI4713_TX_ACOMP_ATTACK_TIME;
		*mul = ATTACK_TIME_UNIT;
		break;
	case V4L2_CID_PILOT_TONE_DEVIATION:
		*property = SI4713_TX_PILOT_DEVIATION;
		*mul = 10;
		break;
	case V4L2_CID_AUDIO_LIMITER_DEVIATION:
		*property = SI4713_TX_AUDIO_DEVIATION;
		*mul = 10;
		break;
	case V4L2_CID_RDS_TX_DEVIATION:
		*property = SI4713_TX_RDS_DEVIATION;
		*mul = 1;
		break;

	case V4L2_CID_RDS_TX_PTY:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 5;
		*mask = 0x1F << 5;
		break;
	case V4L2_CID_RDS_TX_DYNAMIC_PTY:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 15;
		*mask = 1 << 15;
		break;
	case V4L2_CID_RDS_TX_COMPRESSED:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 14;
		*mask = 1 << 14;
		break;
	case V4L2_CID_RDS_TX_ARTIFICIAL_HEAD:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 13;
		*mask = 1 << 13;
		break;
	case V4L2_CID_RDS_TX_MONO_STEREO:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 12;
		*mask = 1 << 12;
		break;
	case V4L2_CID_RDS_TX_TRAFFIC_PROGRAM:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 10;
		*mask = 1 << 10;
		break;
	case V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 4;
		*mask = 1 << 4;
		break;
	case V4L2_CID_RDS_TX_MUSIC_SPEECH:
		*property = SI4713_TX_RDS_PS_MISC;
		*bit = 3;
		*mask = 1 << 3;
		break;
	case V4L2_CID_AUDIO_LIMITER_ENABLED:
		*property = SI4713_TX_ACOMP_ENABLE;
		*bit = 1;
		*mask = 1 << 1;
		break;
	case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
		*property = SI4713_TX_ACOMP_ENABLE;
		*bit = 0;
		*mask = 1 << 0;
		break;
	case V4L2_CID_PILOT_TONE_ENABLED:
		*property = SI4713_TX_COMPONENT_ENABLE;
		*bit = 0;
		*mask = 1 << 0;
		break;

	case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
		*property = SI4713_TX_LIMITER_RELEASE_TIME;
		*table = limiter_times;
		*size = ARRAY_SIZE(limiter_times);
		break;
	case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
		*property = SI4713_TX_ACOMP_RELEASE_TIME;
		*table = acomp_rtimes;
		*size = ARRAY_SIZE(acomp_rtimes);
		break;
	case V4L2_CID_TUNE_PREEMPHASIS:
		*property = SI4713_TX_PREEMPHASIS;
		*table = preemphasis_values;
		*size = ARRAY_SIZE(preemphasis_values);
		break;

	default:
		rval = -EINVAL;
		break;
	}

	return rval;
}

static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f);
static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *);
/*
 * si4713_setup - Sets the device up with current configuration.
 * @sdev: si4713_device structure for the device we are communicating
 */
static int si4713_setup(struct si4713_device *sdev)
{
	struct v4l2_frequency f;
	struct v4l2_modulator vm;
	int rval;

	/* Device procedure needs to set frequency first */
	f.tuner = 0;
	f.frequency = sdev->frequency ? sdev->frequency : DEFAULT_FREQUENCY;
	f.frequency = si4713_to_v4l2(f.frequency);
	rval = si4713_s_frequency(&sdev->sd, &f);

	vm.index = 0;
	if (sdev->stereo)
		vm.txsubchans = V4L2_TUNER_SUB_STEREO;
	else
		vm.txsubchans = V4L2_TUNER_SUB_MONO;
	if (sdev->rds_enabled)
		vm.txsubchans |= V4L2_TUNER_SUB_RDS;
	si4713_s_modulator(&sdev->sd, &vm);

	return rval;
}

/*
 * si4713_initialize - Sets the device up with default configuration.
 * @sdev: si4713_device structure for the device we are communicating
 */
static int si4713_initialize(struct si4713_device *sdev)
{
	int rval;

	rval = si4713_set_power_state(sdev, POWER_ON);
	if (rval < 0)
		return rval;

	rval = si4713_checkrev(sdev);
	if (rval < 0)
		return rval;

	rval = si4713_set_power_state(sdev, POWER_OFF);
	if (rval < 0)
		return rval;

	sdev->frequency = DEFAULT_FREQUENCY;
	sdev->stereo = 1;
	sdev->tune_rnl = DEFAULT_TUNE_RNL;
	return 0;
}

/* si4713_s_ctrl - set the value of a control */
static int si4713_s_ctrl(struct v4l2_ctrl *ctrl)
{
	struct si4713_device *sdev =
		container_of(ctrl->handler, struct si4713_device, ctrl_handler);
	u32 val = 0;
	s32 bit = 0, mask = 0;
	u16 property = 0;
	int mul = 0;
	unsigned long *table = NULL;
	int size = 0;
	bool force = false;
	int c;
	int ret = 0;

	if (ctrl->id != V4L2_CID_AUDIO_MUTE)
		return -EINVAL;
	if (ctrl->is_new) {
		if (ctrl->val) {
			ret = si4713_set_mute(sdev, ctrl->val);
			if (!ret)
				ret = si4713_set_power_state(sdev, POWER_DOWN);
			return ret;
		}
		ret = si4713_set_power_state(sdev, POWER_UP);
		if (!ret)
			ret = si4713_set_mute(sdev, ctrl->val);
		if (!ret)
			ret = si4713_setup(sdev);
		if (ret)
			return ret;
		force = true;
	}

	if (!sdev->power_state)
		return 0;

	for (c = 1; !ret && c < ctrl->ncontrols; c++) {
		ctrl = ctrl->cluster[c];

		if (!force && !ctrl->is_new)
			continue;

		switch (ctrl->id) {
		case V4L2_CID_RDS_TX_PS_NAME:
			ret = si4713_set_rds_ps_name(sdev, ctrl->p_new.p_char);
			break;

		case V4L2_CID_RDS_TX_RADIO_TEXT:
			ret = si4713_set_rds_radio_text(sdev, ctrl->p_new.p_char);
			break;

		case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
			/* don't handle this control if we force setting all
			 * controls since in that case it will be handled by
			 * V4L2_CID_TUNE_POWER_LEVEL. */
			if (force)
				break;
			fallthrough;
		case V4L2_CID_TUNE_POWER_LEVEL:
			ret = si4713_tx_tune_power(sdev,
				sdev->tune_pwr_level->val, sdev->tune_ant_cap->val);
			if (!ret) {
				/* Make sure we don't set this twice */
				sdev->tune_ant_cap->is_new = false;
				sdev->tune_pwr_level->is_new = false;
			}
			break;

		case V4L2_CID_RDS_TX_ALT_FREQS_ENABLE:
		case V4L2_CID_RDS_TX_ALT_FREQS:
			if (sdev->rds_alt_freqs_enable->val) {
				val = sdev->rds_alt_freqs->p_new.p_u32[0];
				val = val / 100 - 876 + 0xe101;
			} else {
				val = 0xe0e0;
			}
			ret = si4713_write_property(sdev, SI4713_TX_RDS_PS_AF, val);
			break;

		default:
			ret = si4713_choose_econtrol_action(sdev, ctrl->id, &bit,
					&mask, &property, &mul, &table, &size);
			if (ret < 0)
				break;

			val = ctrl->val;
			if (mul) {
				val = val / mul;
			} else if (table) {
				ret = usecs_to_dev(val, table, size);
				if (ret < 0)
					break;
				val = ret;
				ret = 0;
			}

			if (mask) {
				ret = si4713_read_property(sdev, property, &val);
				if (ret < 0)
					break;
				val = set_bits(val, ctrl->val, bit, mask);
			}

			ret = si4713_write_property(sdev, property, val);
			if (ret < 0)
				break;
			if (mask)
				val = ctrl->val;
			break;
		}
	}

	return ret;
}

/* si4713_ioctl - deal with private ioctls (only rnl for now) */
static long si4713_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	struct si4713_rnl *rnl = arg;
	u16 frequency;
	int rval = 0;

	if (!arg)
		return -EINVAL;

	switch (cmd) {
	case SI4713_IOC_MEASURE_RNL:
		frequency = v4l2_to_si4713(rnl->frequency);

		if (sdev->power_state) {
			/* Set desired measurement frequency */
			rval = si4713_tx_tune_measure(sdev, frequency, 0);
			if (rval < 0)
				return rval;
			/* get results from tune status */
			rval = si4713_update_tune_status(sdev);
			if (rval < 0)
				return rval;
		}
		rnl->rnl = sdev->tune_rnl;
		break;

	default:
		/* nothing */
		rval = -ENOIOCTLCMD;
	}

	return rval;
}

/* si4713_g_modulator - get modulator attributes */
static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;

	if (!sdev)
		return -ENODEV;

	if (vm->index > 0)
		return -EINVAL;

	strscpy(vm->name, "FM Modulator", sizeof(vm->name));
	vm->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW |
		V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS;

	/* Report current frequency range limits */
	vm->rangelow = si4713_to_v4l2(FREQ_RANGE_LOW);
	vm->rangehigh = si4713_to_v4l2(FREQ_RANGE_HIGH);

	if (sdev->power_state) {
		u32 comp_en = 0;

		rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE,
						&comp_en);
		if (rval < 0)
			return rval;

		sdev->stereo = get_status_bit(comp_en, 1, 1 << 1);
	}

	/* Report current audio mode: mono or stereo */
	if (sdev->stereo)
		vm->txsubchans = V4L2_TUNER_SUB_STEREO;
	else
		vm->txsubchans = V4L2_TUNER_SUB_MONO;

	/* Report rds feature status */
	if (sdev->rds_enabled)
		vm->txsubchans |= V4L2_TUNER_SUB_RDS;
	else
		vm->txsubchans &= ~V4L2_TUNER_SUB_RDS;

	return rval;
}

/* si4713_s_modulator - set modulator attributes */
static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *vm)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;
	u16 stereo, rds;
	u32 p;

	if (!sdev)
		return -ENODEV;

	if (vm->index > 0)
		return -EINVAL;

	/* Set audio mode: mono or stereo */
	if (vm->txsubchans & V4L2_TUNER_SUB_STEREO)
		stereo = 1;
	else if (vm->txsubchans & V4L2_TUNER_SUB_MONO)
		stereo = 0;
	else
		return -EINVAL;

	rds = !!(vm->txsubchans & V4L2_TUNER_SUB_RDS);

	if (sdev->power_state) {
		rval = si4713_read_property(sdev,
						SI4713_TX_COMPONENT_ENABLE, &p);
		if (rval < 0)
			return rval;

		p = set_bits(p, stereo, 1, 1 << 1);
		p = set_bits(p, rds, 2, 1 << 2);

		rval = si4713_write_property(sdev,
						SI4713_TX_COMPONENT_ENABLE, p);
		if (rval < 0)
			return rval;
	}

	sdev->stereo = stereo;
	sdev->rds_enabled = rds;

	return rval;
}

/* si4713_g_frequency - get tuner or modulator radio frequency */
static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;

	if (f->tuner)
		return -EINVAL;

	if (sdev->power_state) {
		u16 freq;
		u8 p, a, n;

		rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n);
		if (rval < 0)
			return rval;

		sdev->frequency = freq;
	}

	f->frequency = si4713_to_v4l2(sdev->frequency);

	return rval;
}

/* si4713_s_frequency - set tuner or modulator radio frequency */
static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;
	u16 frequency = v4l2_to_si4713(f->frequency);

	if (f->tuner)
		return -EINVAL;

	/* Check frequency range */
	frequency = clamp_t(u16, frequency, FREQ_RANGE_LOW, FREQ_RANGE_HIGH);

	if (sdev->power_state) {
		rval = si4713_tx_tune_freq(sdev, frequency);
		if (rval < 0)
			return rval;
		frequency = rval;
		rval = 0;
	}
	sdev->frequency = frequency;

	return rval;
}

static const struct v4l2_ctrl_ops si4713_ctrl_ops = {
	.s_ctrl = si4713_s_ctrl,
};

static const struct v4l2_subdev_core_ops si4713_subdev_core_ops = {
	.ioctl		= si4713_ioctl,
};

static const struct v4l2_subdev_tuner_ops si4713_subdev_tuner_ops = {
	.g_frequency	= si4713_g_frequency,
	.s_frequency	= si4713_s_frequency,
	.g_modulator	= si4713_g_modulator,
	.s_modulator	= si4713_s_modulator,
};

static const struct v4l2_subdev_ops si4713_subdev_ops = {
	.core		= &si4713_subdev_core_ops,
	.tuner		= &si4713_subdev_tuner_ops,
};

static const struct v4l2_ctrl_config si4713_alt_freqs_ctrl = {
	.id = V4L2_CID_RDS_TX_ALT_FREQS,
	.type = V4L2_CTRL_TYPE_U32,
	.min = 87600,
	.max = 107900,
	.step = 100,
	.def = 87600,
	.dims = { 1 },
	.elem_size = sizeof(u32),
};

/*
 * I2C driver interface
 */
/* si4713_probe - probe for the device */
static int si4713_probe(struct i2c_client *client)
{
	struct si4713_device *sdev;
	struct v4l2_ctrl_handler *hdl;
	struct si4713_platform_data *pdata = client->dev.platform_data;
	struct device_node *np = client->dev.of_node;
	struct radio_si4713_platform_data si4713_pdev_pdata;
	struct platform_device *si4713_pdev;
	int rval;

	sdev = devm_kzalloc(&client->dev, sizeof(*sdev), GFP_KERNEL);
	if (!sdev) {
		dev_err(&client->dev, "Failed to alloc video device.\n");
		rval = -ENOMEM;
		goto exit;
	}

	sdev->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
						   GPIOD_OUT_LOW);
	if (IS_ERR(sdev->gpio_reset)) {
		rval = PTR_ERR(sdev->gpio_reset);
		dev_err(&client->dev, "Failed to request gpio: %d\n", rval);
		goto exit;
	}

	sdev->vdd = devm_regulator_get_optional(&client->dev, "vdd");
	if (IS_ERR(sdev->vdd)) {
		rval = PTR_ERR(sdev->vdd);
		if (rval == -EPROBE_DEFER)
			goto exit;

		dev_dbg(&client->dev, "no vdd regulator found: %d\n", rval);
		sdev->vdd = NULL;
	}

	sdev->vio = devm_regulator_get_optional(&client->dev, "vio");
	if (IS_ERR(sdev->vio)) {
		rval = PTR_ERR(sdev->vio);
		if (rval == -EPROBE_DEFER)
			goto exit;

		dev_dbg(&client->dev, "no vio regulator found: %d\n", rval);
		sdev->vio = NULL;
	}

	v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);

	init_completion(&sdev->work);

	hdl = &sdev->ctrl_handler;
	v4l2_ctrl_handler_init(hdl, 20);
	sdev->mute = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_MUTE, 0, 1, 1, DEFAULT_MUTE);

	sdev->rds_pi = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, DEFAULT_RDS_PI);
	sdev->rds_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_PTY, 0, 31, 1, DEFAULT_RDS_PTY);
	sdev->rds_compressed = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_COMPRESSED, 0, 1, 1, 0);
	sdev->rds_art_head = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_ARTIFICIAL_HEAD, 0, 1, 1, 0);
	sdev->rds_stereo = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_MONO_STEREO, 0, 1, 1, 1);
	sdev->rds_tp = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_TRAFFIC_PROGRAM, 0, 1, 1, 0);
	sdev->rds_ta = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
	sdev->rds_ms = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_MUSIC_SPEECH, 0, 1, 1, 1);
	sdev->rds_dyn_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_DYNAMIC_PTY, 0, 1, 1, 0);
	sdev->rds_alt_freqs_enable = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_ALT_FREQS_ENABLE, 0, 1, 1, 0);
	sdev->rds_alt_freqs = v4l2_ctrl_new_custom(hdl, &si4713_alt_freqs_ctrl, NULL);
	sdev->rds_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_DEVIATION, 0, MAX_RDS_DEVIATION,
			10, DEFAULT_RDS_DEVIATION);
	/*
	 * Report step as 8. From RDS spec, psname
	 * should be 8. But there are receivers which scroll strings
	 * sized as 8xN.
	 */
	sdev->rds_ps_name = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_PS_NAME, 0, MAX_RDS_PS_NAME, 8, 0);
	/*
	 * Report step as 32 (2A block). From RDS spec,
	 * radio text should be 32 for 2A block. But there are receivers
	 * which scroll strings sized as 32xN. Setting default to 32.
	 */
	sdev->rds_radio_text = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_RDS_TX_RADIO_TEXT, 0, MAX_RDS_RADIO_TEXT, 32, 0);

	sdev->limiter_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_LIMITER_ENABLED, 0, 1, 1, 1);
	sdev->limiter_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_LIMITER_RELEASE_TIME, 250,
			MAX_LIMITER_RELEASE_TIME, 10, DEFAULT_LIMITER_RTIME);
	sdev->limiter_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_LIMITER_DEVIATION, 0,
			MAX_LIMITER_DEVIATION, 10, DEFAULT_LIMITER_DEV);

	sdev->compression_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_COMPRESSION_ENABLED, 0, 1, 1, 1);
	sdev->compression_gain = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
			DEFAULT_ACOMP_GAIN);
	sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_COMPRESSION_THRESHOLD,
			MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1,
			DEFAULT_ACOMP_THRESHOLD);
	sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
			MAX_ACOMP_ATTACK_TIME, 500, DEFAULT_ACOMP_ATIME);
	sdev->compression_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME, 100000,
			MAX_ACOMP_RELEASE_TIME, 100000, DEFAULT_ACOMP_RTIME);

	sdev->pilot_tone_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_PILOT_TONE_ENABLED, 0, 1, 1, 1);
	sdev->pilot_tone_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_PILOT_TONE_DEVIATION, 0, MAX_PILOT_DEVIATION,
			10, DEFAULT_PILOT_DEVIATION);
	sdev->pilot_tone_freq = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_PILOT_TONE_FREQUENCY, 0, MAX_PILOT_FREQUENCY,
			1, DEFAULT_PILOT_FREQUENCY);

	sdev->tune_preemphasis = v4l2_ctrl_new_std_menu(hdl, &si4713_ctrl_ops,
			V4L2_CID_TUNE_PREEMPHASIS,
			V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
	sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER,
			1, DEFAULT_POWER_LEVEL);
	sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
			V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP,
			1, 0);

	if (hdl->error) {
		rval = hdl->error;
		goto free_ctrls;
	}
	v4l2_ctrl_cluster(29, &sdev->mute);
	sdev->sd.ctrl_handler = hdl;

	if (client->irq) {
		rval = devm_request_irq(&client->dev, client->irq,
			si4713_handler, IRQF_TRIGGER_FALLING,
			client->name, sdev);
		if (rval < 0) {
			v4l2_err(&sdev->sd, "Could not request IRQ\n");
			goto free_ctrls;
		}
		v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
	} else {
		v4l2_warn(&sdev->sd, "IRQ not configured. Using timeouts.\n");
	}

	rval = si4713_initialize(sdev);
	if (rval < 0) {
		v4l2_err(&sdev->sd, "Failed to probe device information.\n");
		goto free_ctrls;
	}

	if (!np && (!pdata || !pdata->is_platform_device))
		return 0;

	si4713_pdev = platform_device_alloc("radio-si4713", -1);
	if (!si4713_pdev) {
		rval = -ENOMEM;
		goto put_main_pdev;
	}

	si4713_pdev_pdata.subdev = client;
	rval = platform_device_add_data(si4713_pdev, &si4713_pdev_pdata,
					sizeof(si4713_pdev_pdata));
	if (rval)
		goto put_main_pdev;

	rval = platform_device_add(si4713_pdev);
	if (rval)
		goto put_main_pdev;

	sdev->pd = si4713_pdev;

	return 0;

put_main_pdev:
	platform_device_put(si4713_pdev);
	v4l2_device_unregister_subdev(&sdev->sd);
free_ctrls:
	v4l2_ctrl_handler_free(hdl);
exit:
	return rval;
}

/* si4713_remove - remove the device */
static void si4713_remove(struct i2c_client *client)
{
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
	struct si4713_device *sdev = to_si4713_device(sd);

	platform_device_unregister(sdev->pd);

	if (sdev->power_state)
		si4713_set_power_state(sdev, POWER_DOWN);

	v4l2_device_unregister_subdev(sd);
	v4l2_ctrl_handler_free(sd->ctrl_handler);
}

/* si4713_i2c_driver - i2c driver interface */
static const struct i2c_device_id si4713_id[] = {
	{ "si4713" , 0 },
	{ },
};
MODULE_DEVICE_TABLE(i2c, si4713_id);

#if IS_ENABLED(CONFIG_OF)
static const struct of_device_id si4713_of_match[] = {
	{ .compatible = "silabs,si4713" },
	{ },
};
MODULE_DEVICE_TABLE(of, si4713_of_match);
#endif

static struct i2c_driver si4713_i2c_driver = {
	.driver		= {
		.name	= "si4713",
		.of_match_table = of_match_ptr(si4713_of_match),
	},
	.probe_new	= si4713_probe,
	.remove         = si4713_remove,
	.id_table       = si4713_id,
};

module_i2c_driver(si4713_i2c_driver);