// SPDX-License-Identifier: GPL-2.0+
//
// em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
// video capture devices
//
// Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
// Markus Rechberger <mrechberger@gmail.com>
// Mauro Carvalho Chehab <mchehab@kernel.org>
// Sascha Sommer <saschasommer@freenet.de>
// Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
#include "em28xx.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/usb.h>
#include <media/tuner.h>
#include <media/drv-intf/msp3400.h>
#include <media/i2c/saa7115.h>
#include <dt-bindings/media/tvp5150.h>
#include <media/i2c/tvaudio.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
#include <sound/ac97_codec.h>
#define DRIVER_NAME "em28xx"
static int tuner = -1;
module_param(tuner, int, 0444);
MODULE_PARM_DESC(tuner, "tuner type");
static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
static unsigned int disable_usb_speed_check;
module_param(disable_usb_speed_check, int, 0444);
MODULE_PARM_DESC(disable_usb_speed_check,
"override min bandwidth requirement of 480M bps");
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
static int usb_xfer_mode = -1;
module_param(usb_xfer_mode, int, 0444);
MODULE_PARM_DESC(usb_xfer_mode,
"USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
struct em28xx_hash_table {
unsigned long hash;
unsigned int model;
unsigned int tuner;
};
static void em28xx_pre_card_setup(struct em28xx *dev);
/*
* Reset sequences for analog/digital modes
*/
/* Reset for the most [analog] boards */
static const struct em28xx_reg_seq default_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Reset for the most [digital] boards */
static const struct em28xx_reg_seq default_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Board :Zolid Hybrid Tv Stick */
static struct em28xx_reg_seq zolid_tuner[] = {
{EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100},
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq zolid_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100},
{EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100},
{EM2880_R04_GPO, 0x04, 0xff, 100},
{EM2880_R04_GPO, 0x0c, 0xff, 100},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 analog */
static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
{ 0x05, 0xff, 0x10, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 digital */
static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0x0f, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 (R2) digital */
static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
{ -1, -1, -1, -1},
};
/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Board - EM2882 Kworld 315U digital */
static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
{EM2880_R04_GPO, 0x04, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
{EM2880_R04_GPO, 0x08, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq kworld_330u_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq kworld_330u_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
/*
* Evga inDtube
* GPIO0 - Enable digital power (s5h1409) - low to enable
* GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
* GPIO4 - xc3028 reset
* GOP3 - s5h1409 reset
*/
static const struct em28xx_reg_seq evga_indtube_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq evga_indtube_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
{EM2880_R04_GPO, 0x04, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 1},
{ -1, -1, -1, -1},
};
/*
* KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
* EM_GPIO_0 - currently unknown
* EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
* EM_GPIO_2 - currently unknown
* EM_GPIO_3 - currently unknown
* EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
* EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
* EM_GPIO_6 - currently unknown
* EM_GPIO_7 - currently unknown
*/
static const struct em28xx_reg_seq kworld_a340_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
{ -1, -1, -1, -1},
};
/* Pinnacle Hybrid Pro eb1a:2881 */
static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
{EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
{EM2880_R04_GPO, 0x0c, 0xff, 1},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
/*
* PCTV HD Mini (80e) GPIOs
* 0-5: not used
* 6: demod reset, active low
* 7: LED on, active high
*/
static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
{EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
{EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
{EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
{ -1, -1, -1, -1},
};
/*
* eb1a:2868 Reddo DVB-C USB TV Box
* GPIO4 - CU1216L NIM
* Other GPIOs seems to be don't care.
*/
static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
/* Callback for the most boards */
static const struct em28xx_reg_seq default_tuner_gpio[] = {
{EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
{EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
{EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Mute/unmute */
static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
{EM2820_R08_GPIO_CTRL, 5, 7, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
{EM2820_R08_GPIO_CTRL, 4, 7, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq compro_mute_gpio[] = {
{EM2820_R08_GPIO_CTRL, 6, 7, 10},
{ -1, -1, -1, -1},
};
/* Terratec AV350 */
static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq silvercrest_reg_seq[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq vc211a_enable[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
{EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
{EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq dikom_dk300_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
/* Reset for the most [digital] boards */
static const struct em28xx_reg_seq leadership_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq leadership_reset[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
{ -1, -1, -1, -1},
};
/*
* 2013:024f PCTV nanoStick T2 290e
* GPIO_6 - demod reset
* GPIO_7 - LED
*/
static const struct em28xx_reg_seq pctv_290e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
{EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
{ -1, -1, -1, -1},
};
#if 0
static const struct em28xx_reg_seq terratec_h5_gpio[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq terratec_h5_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
/*
* 2013:024f PCTV DVB-S2 Stick 460e
* GPIO_0 - POWER_ON
* GPIO_1 - BOOST
* GPIO_2 - VUV_LNB (red LED)
* GPIO_3 - EXT_12V
* GPIO_4 - INT_DEM (DEMOD GPIO_0)
* GPIO_5 - INT_LNB
* GPIO_6 - RESET_DEM
* GPIO_7 - LED (green LED)
*/
static const struct em28xx_reg_seq pctv_460e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
{ 0x0d, 0xff, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
{ 0x0d, 0x42, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
{EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
{EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
{ -1, -1, -1, -1},
};
/*
* 2013:0258 PCTV DVB-S2 Stick (461e)
* GPIO 0 = POWER_ON
* GPIO 1 = BOOST
* GPIO 2 = VUV_LNB (red LED)
* GPIO 3 = #EXT_12V
* GPIO 4 = INT_DEM
* GPIO 5 = INT_LNB
* GPIO 6 = #RESET_DEM
* GPIO 7 = P07_LED (green LED)
*/
static const struct em28xx_reg_seq pctv_461e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
{0x0d, 0xff, 0xff, 0},
{EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
{EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */
{0x0d, 0x42, 0xff, 0},
{EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0},
{EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */
{ -1, -1, -1, -1},
};
#if 0
static const struct em28xx_reg_seq hauppauge_930c_gpio[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
{EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq hauppauge_930c_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
/*
* 1b80:e425 MaxMedia UB425-TC
* 1b80:e1cc Delock 61959
* GPIO_6 - demod reset, 0=active
* GPIO_7 - LED, 0=active
*/
static const struct em28xx_reg_seq maxmedia_ub425_tc[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
{ -1, -1, -1, -1},
};
/*
* 2304:0242 PCTV QuatroStick (510e)
* GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active
* GPIO_6: demod reset, 0=active
* GPIO_7: LED, 1=active
*/
static const struct em28xx_reg_seq pctv_510e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
{ -1, -1, -1, -1},
};
/*
* 2013:0251 PCTV QuatroStick nano (520e)
* GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active
* GPIO_6: demod reset, 0=active
* GPIO_7: LED, 1=active
*/
static const struct em28xx_reg_seq pctv_520e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
{ -1, -1, -1, -1},
};
/*
* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
* reg 0x80/0x84:
* GPIO_0: capturing LED, 0=on, 1=off
* GPIO_2: AV mute button, 0=pressed, 1=unpressed
* GPIO 3: illumination button, 0=pressed, 1=unpressed
* GPIO_6: illumination/flash LED, 0=on, 1=off
* reg 0x81/0x85:
* GPIO_7: snapshot button, 0=pressed, 1=unpressed
*/
static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
{EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
{ -1, -1, -1, -1},
};
static const struct em28xx_reg_seq pctv_292e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 950},
{EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410},
{EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300},
{EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60},
{0x0d, 0x42, 0xff, 50},
{EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
{-1, -1, -1, -1},
};
static const struct em28xx_reg_seq terratec_t2_stick_hd[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 600},
{EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
{EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
{0x0d, 0x42, 0xff, 1000},
{EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
{-1, -1, -1, -1},
};
static const struct em28xx_reg_seq plex_px_bcud[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 0},
{EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
{EM28XX_R06_I2C_CLK, 0x40, 0xff, 0},
{EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100},
{EM28XX_R12_VINENABLE, 0x20, 0x20, 0},
{0x0d, 0x42, 0xff, 1000},
{EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
{0x73, 0xfd, 0xff, 100},
{-1, -1, -1, -1},
};
/*
* 2040:0265 Hauppauge WinTV-dualHD DVB Isoc
* 2040:8265 Hauppauge WinTV-dualHD DVB Bulk
* 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc
* 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk
* reg 0x80/0x84:
* GPIO_0: Yellow LED tuner 1, 0=on, 1=off
* GPIO_1: Green LED tuner 1, 0=on, 1=off
* GPIO_2: Yellow LED tuner 2, 0=on, 1=off
* GPIO_3: Green LED tuner 2, 0=on, 1=off
* GPIO_5: Reset #2, 0=active
* GPIO_6: Reset #1, 0=active
*/
static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 200},
{0x50, 0x04, 0xff, 300},
{EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
{EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */
{EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
{EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
{-1, -1, -1, -1},
};
/*
* Button definitions
*/
static const struct em28xx_button std_snapshot_button[] = {
{
.role = EM28XX_BUTTON_SNAPSHOT,
.reg_r = EM28XX_R0C_USBSUSP,
.reg_clearing = EM28XX_R0C_USBSUSP,
.mask = EM28XX_R0C_USBSUSP_SNAPSHOT,
.inverted = 0,
},
{-1, 0, 0, 0, 0},
};
static const struct em28xx_button speedlink_vad_laplace_buttons[] = {
{
.role = EM28XX_BUTTON_SNAPSHOT,
.reg_r = EM2874_R85_GPIO_P1_STATE,
.mask = 0x80,
.inverted = 1,
},
{
.role = EM28XX_BUTTON_ILLUMINATION,
.reg_r = EM2874_R84_GPIO_P0_STATE,
.mask = 0x08,
.inverted = 1,
},
{-1, 0, 0, 0, 0},
};
/*
* LED definitions
*/
static struct em28xx_led speedlink_vad_laplace_leds[] = {
{
.role = EM28XX_LED_ANALOG_CAPTURING,
.gpio_reg = EM2874_R80_GPIO_P0_CTRL,
.gpio_mask = 0x01,
.inverted = 1,
},
{
.role = EM28XX_LED_ILLUMINATION,
.gpio_reg = EM2874_R80_GPIO_P0_CTRL,
.gpio_mask = 0x40,
.inverted = 1,
},
{-1, 0, 0, 0},
};
static struct em28xx_led kworld_ub435q_v3_leds[] = {
{
.role = EM28XX_LED_DIGITAL_CAPTURING,
.gpio_reg = EM2874_R80_GPIO_P0_CTRL,
.gpio_mask = 0x80,
.inverted = 1,
},
{-1, 0, 0, 0},
};
static struct em28xx_led pctv_80e_leds[] = {
{
.role = EM28XX_LED_DIGITAL_CAPTURING,
.gpio_reg = EM2874_R80_GPIO_P0_CTRL,
.gpio_mask = 0x80,
.inverted = 0,
},
{-1, 0, 0, 0},
};
static struct em28xx_led terratec_grabby_leds[] = {
{
.role = EM28XX_LED_ANALOG_CAPTURING,
.gpio_reg = EM2820_R08_GPIO_CTRL,
.gpio_mask = EM_GPIO_3,
.inverted = 1,
},
{-1, 0, 0, 0},
};
static struct em28xx_led hauppauge_dualhd_leds[] = {
{
.role = EM28XX_LED_DIGITAL_CAPTURING,
.gpio_reg = EM2874_R80_GPIO_P0_CTRL,
.gpio_mask = EM_GPIO_1,
.inverted = 1,
},
{
.role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
.gpio_reg = EM2874_R80_GPIO_P0_CTRL,
.gpio_mask = EM_GPIO_3,
.inverted = 1,
},
{-1, 0, 0, 0},
};
/*
* Board definitions
*/
const struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
.name = "EM2710/EM2750/EM2751 webcam grabber",
.xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = silvercrest_reg_seq,
} },
},
[EM2800_BOARD_UNKNOWN] = {
.name = "Unknown EM2800 video grabber",
.is_em2800 = 1,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/28xx video grabber",
.tuner_type = TUNER_ABSENT,
.is_webcam = 1, /* To enable sensor probe */
},
[EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = {
.name = ":ZOLID HYBRID TV STICK",
.tuner_type = TUNER_XC2028,
.tuner_gpio = zolid_tuner,
.decoder = EM28XX_TVP5150,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = zolid_digital,
},
[EM2750_BOARD_DLCW_130] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "Huaqi DLCW-130",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
.name = "Kworld PVR TV 2800 RF",
.tuner_type = TUNER_TEMIC_PAL,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_GADMEI_TVR200] = {
.name = "Gadmei TVR200",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_TERRATEC_CINERGY_250] = {
.name = "Terratec Cinergy 250 USB",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.has_ir_i2c = 1,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_USB_2] = {
.name = "Pinnacle PCTV USB 2",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.has_ir_i2c = 1,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
.name = "Hauppauge WinTV USB 2",
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
.decoder = EM28XX_TVP5150,
.has_msp34xx = 1,
.has_ir_i2c = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = MSP_INPUT_DEFAULT,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
} },
},
[EM2820_BOARD_DLINK_USB_TV] = {
.name = "D-Link DUB-T210 TV Tuner",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
.name = "Hercules Smart TV USB 2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
.name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_GADMEI_UTV310] = {
.name = "Gadmei UTV310",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
.name = "Leadtek Winfast USB II Deluxe",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.has_ir_i2c = 1,
.tvaudio_addr = 0x58,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT2_ACTIVE |
TDA9887_QSS,
.decoder = EM28XX_SAA711X,
.adecoder = EM28XX_TVAUDIO,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE4,
.amux = EM28XX_AMUX_AUX,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE5,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
.radio = {
.type = EM28XX_RADIO,
.amux = EM28XX_AMUX_AUX,
}
},
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2820_BOARD_SILVERCREST_WEBCAM] = {
.name = "Silvercrest Webcam 1.3mpix",
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = silvercrest_reg_seq,
} },
},
[EM2821_BOARD_SUPERCOMP_USB_2] = {
.name = "Supercomp USB 2.0 TV",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2821_BOARD_USBGEAR_VD204] = {
.name = "Usbgear VD204v9",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_NETGMBH_CAM] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "NetGMBH Cam",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2860_BOARD_TYPHOON_DVD_MAKER] = {
.name = "Typhoon DVD Maker",
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_GADMEI_UTV330] = {
.name = "Gadmei UTV330",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_GADMEI_UTV330PLUS] = {
.name = "Gadmei UTV330+",
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.ir_codes = RC_MAP_GADMEI_RM008Z,
.decoder = EM28XX_SAA711X,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Cinergy A Hybrid XS",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2861_BOARD_KWORLD_PVRTV_300U] = {
.name = "KWorld PVRTV 300U",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
.name = "Yakumo MovieMixer",
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
.name = "EM2860/TVP5150 Reference Design",
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
.tuner_type = TUNER_TNF_5335MF,
.xclk = EM28XX_XCLK_I2S_MSB_TIMING |
EM28XX_XCLK_FREQUENCY_12MHZ,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
.has_msp34xx = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
} },
},
/* Those boards with em2870 are DVB Only*/
[EM2870_BOARD_TERRATEC_XS] = {
.name = "Terratec Cinergy T XS",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
},
[EM2870_BOARD_TERRATEC_XS_MT2060] = {
.name = "Terratec Cinergy T XS (MT2060)",
.xclk = EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
.tuner_type = TUNER_ABSENT, /* MT2060 */
.has_dvb = 1,
.tuner_gpio = default_tuner_gpio,
},
[EM2870_BOARD_KWORLD_350U] = {
.name = "Kworld 350 U DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
},
[EM2870_BOARD_KWORLD_355U] = {
.name = "Kworld 355 U DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = default_tuner_gpio,
.has_dvb = 1,
.dvb_gpio = default_digital,
},
[EM2870_BOARD_PINNACLE_PCTV_DVB] = {
.name = "Pinnacle PCTV DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* MT2060 */
/* djh - I have serious doubts this is right... */
.xclk = EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_10MHZ,
},
[EM2870_BOARD_COMPRO_VIDEOMATE] = {
.name = "Compro, VideoMate U3",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* MT2060 */
},
[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
.name = "Terratec Hybrid XS Secam",
.has_msp34xx = 1,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = terratec_cinergy_USB_XS_FR_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_cinergy_USB_XS_FR_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_cinergy_USB_XS_FR_analog,
} },
},
[EM2884_BOARD_TERRATEC_H5] = {
.name = "Terratec Cinergy H5",
.has_dvb = 1,
#if 0
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x41,
.dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
.tuner_gpio = terratec_h5_gpio,
#else
.tuner_type = TUNER_ABSENT,
#endif
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_TERRATEC_H6] = {
.name = "Terratec Cinergy H6 rev. 2",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
#if 0
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x41,
.dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
.tuner_gpio = terratec_h5_gpio,
#else
.tuner_type = TUNER_ABSENT,
#endif
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
.name = "Hauppauge WinTV HVR 930C",
.has_dvb = 1,
#if 0 /* FIXME: Add analog support */
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x41,
.dvb_gpio = hauppauge_930c_digital,
.tuner_gpio = hauppauge_930c_gpio,
#else
.tuner_type = TUNER_ABSENT,
#endif
.ir_codes = RC_MAP_HAUPPAUGE,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
.name = "C3 Tech Digital Duo HDTV/SDTV USB",
.has_dvb = 1,
/* FIXME: Add analog support - need a saa7136 driver */
.tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
.ir_codes = RC_MAP_EMPTY,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
.dvb_gpio = c3tech_digital_duo_digital,
},
[EM2884_BOARD_CINERGY_HTC_STICK] = {
.name = "Terratec Cinergy HTC Stick",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = {
.name = "Elgato EyeTV Hybrid 2008 INT",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
.name = "Hauppauge WinTV HVR 900",
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
.name = "Hauppauge WinTV HVR 900 (R2)",
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
.name = "Hauppauge WinTV HVR 850",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
.name = "Hauppauge WinTV HVR 950",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
.name = "Pinnacle PCTV HD Pro Stick",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
.name = "AMD ATI TV Wonder HD 600",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Hybrid XS",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = default_digital,
.ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
/*
* maybe there's a reason behind it why Terratec sells the Hybrid XS
* as Prodigy XS with a different PID, let's keep it separated for now
* maybe we'll need it later on
*/
[EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
.name = "Terratec Prodigy XS",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2820_BOARD_MSI_VOX_USB_2] = {
.name = "MSI VOX USB 2.0",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
.max_range_640_480 = 1,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE4,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_TERRATEC_CINERGY_200] = {
.name = "Terratec Cinergy 200 USB",
.is_em2800 = 1,
.has_ir_i2c = 1,
.tuner_type = TUNER_LG_TALN,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_GRABBEEX_USB2800] = {
.name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
.is_em2800 = 1,
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* capture only board */
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_VC211A] = {
.name = "Actionmaster/LinXcel/Digitus VC211A",
.is_em2800 = 1,
.tuner_type = TUNER_ABSENT, /* Capture-only board */
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = vc211a_enable,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = vc211a_enable,
} },
},
[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
.name = "Leadtek Winfast USB II",
.is_em2800 = 1,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_KWORLD_USB2800] = {
.name = "Kworld USB2800",
.is_em2800 = 1,
.tuner_type = TUNER_PHILIPS_FCV1236D,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_DVC_90] = {
.name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
.tuner_type = TUNER_ABSENT, /* capture only board */
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_VGEAR_POCKETTV] = {
.name = "V-Gear PocketTV",
.is_em2800 = 1,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
.name = "Pixelview PlayTV Box 4 USB 2.0",
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
.aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
.name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
.buttons = std_snapshot_button,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.tuner_addr = 0x60,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
.aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
.name = "EM2860/SAA711X Reference Design",
.buttons = std_snapshot_button,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
} },
},
[EM2874_BOARD_LEADERSHIP_ISDBT] = {
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ,
.xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
.name = "EM2874 Leadership ISDBT",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = leadership_reset,
.dvb_gpio = leadership_digital,
.has_dvb = 1,
},
[EM2880_BOARD_MSI_DIGIVOX_AD] = {
.name = "MSI DigiVox A/D",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
} },
},
[EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
.name = "MSI DigiVox A/D II",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
} },
},
[EM2880_BOARD_KWORLD_DVB_305U] = {
.name = "KWorld DVB-T 305U",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2880_BOARD_KWORLD_DVB_310U] = {
.name = "KWorld DVB-T 310U",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.has_dvb = 1,
.dvb_gpio = default_digital,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, { /* S-video has not been tested yet */
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
[EM2882_BOARD_KWORLD_ATSC_315U] = {
.name = "KWorld ATSC 315U HDTV TV Box",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_THOMSON_DTT761X,
.tuner_gpio = em2882_kworld_315u_tuner_gpio,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.has_dvb = 1,
.dvb_gpio = em2882_kworld_315u_digital,
.ir_codes = RC_MAP_KWORLD_315U,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
#if 0
/* FIXME: Analog mode - still not ready */
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2882_kworld_315u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2882_kworld_315u_analog1,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2882_kworld_315u_analog1,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
} },
#endif
},
[EM2880_BOARD_EMPIRE_DUAL_TV] = {
.name = "Empire dual TV",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.has_dvb = 1,
.dvb_gpio = default_digital,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
[EM2881_BOARD_DNT_DA2_HYBRID] = {
.name = "DNT DA2 Hybrid",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
.name = "Pinnacle Hybrid Pro",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = pinnacle_hybrid_pro_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
} },
},
[EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
.name = "Pinnacle Hybrid Pro (330e)",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2882_BOARD_KWORLD_VS_DVBT] = {
.name = "Kworld VS-DVB-T 323UR",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = kworld_330u_digital,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
.ir_codes = RC_MAP_KWORLD_315U,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Cinergy Hybrid T USB XS (em2882)",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2882_BOARD_DIKOM_DK300] = {
.name = "Dikom DK300",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = dikom_dk300_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
} },
},
[EM2883_BOARD_KWORLD_HYBRID_330U] = {
.name = "Kworld PlusTV HD Hybrid 330",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = kworld_330u_digital,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_EEPROM_ON_BOARD |
EM28XX_I2C_EEPROM_KEY_VALID,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = kworld_330u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = kworld_330u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = kworld_330u_analog,
} },
},
[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
.name = "Compro VideoMate ForYou/Stereo",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tvaudio_addr = 0xb0,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
.adecoder = EM28XX_TVAUDIO,
.mute_gpio = compro_mute_gpio,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = compro_unmute_tv_gpio,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = compro_unmute_svid_gpio,
} },
},
[EM2860_BOARD_KAIOMY_TVNPC_U2] = {
.name = "Kaiomy TVnPC U2",
.vchannels = 3,
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.tuner_gpio = default_tuner_gpio,
.ir_codes = RC_MAP_KAIOMY,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
.radio = {
.type = EM28XX_RADIO,
.amux = EM28XX_AMUX_LINE_IN,
}
},
[EM2860_BOARD_EASYCAP] = {
.name = "Easy Cap Capture DC-60",
.vchannels = 2,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_IODATA_GVMVP_SZ] = {
.name = "IO-DATA GV-MVP/SZ",
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tuner_gpio = default_tuner_gpio,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, { /* Composite has not been tested yet */
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_VIDEO,
}, { /* S-video has not been tested yet */
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2860_BOARD_TERRATEC_GRABBY] = {
.name = "Terratec Grabby",
.vchannels = 2,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
.buttons = std_snapshot_button,
.leds = terratec_grabby_leds,
},
[EM2860_BOARD_TERRATEC_AV350] = {
.name = "Terratec AV350",
.vchannels = 2,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_TVP5150,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.mute_gpio = terratec_av350_mute_gpio,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_av350_unmute_gpio,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_av350_unmute_gpio,
} },
},
[EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
.name = "Elgato Video Capture",
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2882_BOARD_EVGA_INDTUBE] = {
.name = "Evga inDtube",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = evga_indtube_digital,
.ir_codes = RC_MAP_EVGA_INDTUBE,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = evga_indtube_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = evga_indtube_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = evga_indtube_analog,
} },
},
/*
* eb1a:2868 Empia EM2870 + Philips CU1216L NIM
* (Philips TDA10023 + Infineon TUA6034)
*/
[EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
.name = "Reddo DVB-C USB TV Box",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = reddo_dvb_c_usb_box,
.has_dvb = 1,
},
/*
* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
* initially as the KWorld PlusTV 340U, then as the UB435-Q.
* Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2
*/
[EM2870_BOARD_KWORLD_A340] = {
.name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
.tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
.has_dvb = 1,
.dvb_gpio = kworld_a340_digital,
.tuner_gpio = default_tuner_gpio,
},
/*
* 2013:024f PCTV nanoStick T2 290e.
* Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2
*/
[EM28174_BOARD_PCTV_290E] = {
.name = "PCTV nanoStick T2 290e",
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_290e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
/*
* 2013:024f PCTV DVB-S2 Stick 460e
* Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293
*/
[EM28174_BOARD_PCTV_460E] = {
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.name = "PCTV DVB-S2 Stick (460e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_460e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
/*
* eb1a:5006 Honestech VIDBOX NW03
* Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
*/
[EM2860_BOARD_HT_VIDBOX_NW03] = {
.name = "Honestech Vidbox NW03",
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */
.amux = EM28XX_AMUX_LINE_IN,
} },
},
/*
* 1b80:e425 MaxMedia UB425-TC
* Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
*/
[EM2874_BOARD_MAXMEDIA_UB425_TC] = {
.name = "MaxMedia UB425-TC",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = maxmedia_ub425_tc,
.has_dvb = 1,
.ir_codes = RC_MAP_REDDO,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/*
* 2304:0242 PCTV QuatroStick (510e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
*/
[EM2884_BOARD_PCTV_510E] = {
.name = "PCTV QuatroStick (510e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_510e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/*
* 2013:0251 PCTV QuatroStick nano (520e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
*/
[EM2884_BOARD_PCTV_520E] = {
.name = "PCTV QuatroStick nano (520e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_520e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
.name = "Terratec Cinergy HTC USB XS",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/*
* 1b80:e1cc Delock 61959
* Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
* mostly the same as MaxMedia UB-425-TC but different remote
*/
[EM2874_BOARD_DELOCK_61959] = {
.name = "Delock 61959",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = maxmedia_ub425_tc,
.has_dvb = 1,
.ir_codes = RC_MAP_DELOCK_61959,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/*
* 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
* Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
*/
[EM2874_BOARD_KWORLD_UB435Q_V2] = {
.name = "KWorld USB ATSC TV Stick UB435-Q V2",
.tuner_type = TUNER_ABSENT,
.has_dvb = 1,
.dvb_gpio = kworld_a340_digital,
.tuner_gpio = default_tuner_gpio,
.def_i2c_bus = 1,
},
/*
* 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3
* Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
*/
[EM2874_BOARD_KWORLD_UB435Q_V3] = {
.name = "KWorld USB ATSC TV Stick UB435-Q V3",
.tuner_type = TUNER_ABSENT,
.has_dvb = 1,
.tuner_gpio = kworld_ub435q_v3_digital,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ,
.leds = kworld_ub435q_v3_leds,
},
[EM2874_BOARD_PCTV_HD_MINI_80E] = {
.name = "Pinnacle PCTV HD Mini",
.tuner_type = TUNER_ABSENT,
.has_dvb = 1,
.dvb_gpio = em2874_pctv_80e_digital,
.decoder = EM28XX_NODECODER,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.leds = pctv_80e_leds,
},
/*
* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
* Empia EM2765 + OmniVision OV2640
*/
[EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
.name = "SpeedLink Vicious And Devine Laplace webcam",
.xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ,
.def_i2c_bus = 1,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.amux = EM28XX_AMUX_VIDEO,
.gpio = speedlink_vad_laplace_reg_seq,
} },
.buttons = speedlink_vad_laplace_buttons,
.leds = speedlink_vad_laplace_leds,
},
/*
* 2013:0258 PCTV DVB-S2 Stick (461e)
* Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293
*/
[EM28178_BOARD_PCTV_461E] = {
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.name = "PCTV DVB-S2 Stick (461e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_461e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
/*
* 2013:025f PCTV tripleStick (292e).
* Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157
*/
[EM28178_BOARD_PCTV_292E] = {
.name = "PCTV tripleStick (292e)",
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_292e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
[EM2861_BOARD_LEADTEK_VC100] = {
.name = "Leadtek VC100",
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
/*
* eb1a:8179 Terratec Cinergy T2 Stick HD.
* Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146
*/
[EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
.name = "Terratec Cinergy T2 Stick HD",
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = terratec_t2_stick_hd,
.has_dvb = 1,
.ir_codes = RC_MAP_TERRATEC_SLIM_2,
},
/*
* 3275:0085 PLEX PX-BCUD.
* Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042
*/
[EM28178_BOARD_PLEX_PX_BCUD] = {
.name = "PLEX PX-BCUD",
.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = plex_px_bcud,
.has_dvb = 1,
},
/*
* 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc.
* 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk.
* Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
*/
[EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
.name = "Hauppauge WinTV-dualHD DVB",
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = hauppauge_dualhd_dvb,
.has_dvb = 1,
.has_dual_ts = 1,
.ir_codes = RC_MAP_HAUPPAUGE,
.leds = hauppauge_dualhd_leds,
},
/*
* 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc.
* 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk.
* Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157
*/
[EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = {
.name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM",
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = hauppauge_dualhd_dvb,
.has_dvb = 1,
.has_dual_ts = 1,
.ir_codes = RC_MAP_HAUPPAUGE,
.leds = hauppauge_dualhd_leds,
},
};
EXPORT_SYMBOL_GPL(em28xx_boards);
static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
/* table of devices that work with this driver */
struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0xeb1a, 0x2750),
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2751),
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2800),
.driver_info = EM2800_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2710),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2820),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2821),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2860),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2861),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2862),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2863),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2870),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2881),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2868),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2875),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0xeb1a, 0xe300),
.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
{ USB_DEVICE(0xeb1a, 0xe303),
.driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
{ USB_DEVICE(0xeb1a, 0xe305),
.driver_info = EM2880_BOARD_KWORLD_DVB_305U },
{ USB_DEVICE(0xeb1a, 0xe310),
.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
{ USB_DEVICE(0xeb1a, 0xa313),
.driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
{ USB_DEVICE(0xeb1a, 0xa316),
.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
{ USB_DEVICE(0xeb1a, 0xe320),
.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
{ USB_DEVICE(0xeb1a, 0xe323),
.driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
{ USB_DEVICE(0xeb1a, 0xe350),
.driver_info = EM2870_BOARD_KWORLD_350U },
{ USB_DEVICE(0xeb1a, 0xe355),
.driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0xeb1a, 0x2801),
.driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
{ USB_DEVICE(0xeb1a, 0xe357),
.driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0xeb1a, 0xe359),
.driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x0ccd, 0x0036),
.driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
{ USB_DEVICE(0x0ccd, 0x004c),
.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
{ USB_DEVICE(0x0ccd, 0x004f),
.driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x005e),
.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0042),
.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0043),
.driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 },
{ USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
{ USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
{ USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10b2), /* H6 */
.driver_info = EM2884_BOARD_TERRATEC_H6 },
{ USB_DEVICE(0x0ccd, 0x0084),
.driver_info = EM2860_BOARD_TERRATEC_AV350 },
{ USB_DEVICE(0x0ccd, 0x0096),
.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x0ccd, 0x10AF),
.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x0ccd, 0x00b2),
.driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
{ USB_DEVICE(0x0fd9, 0x0018),
.driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 },
{ USB_DEVICE(0x0fd9, 0x0033),
.driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE },
{ USB_DEVICE(0x185b, 0x2870),
.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
{ USB_DEVICE(0x185b, 0x2041),
.driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
{ USB_DEVICE(0x2040, 0x4200),
.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2040, 0x4201),
.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2040, 0x6500),
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
{ USB_DEVICE(0x2040, 0x6502),
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
{ USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x651f),
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
{ USB_DEVICE(0x2040, 0x0265),
.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
{ USB_DEVICE(0x2040, 0x8265),
.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
{ USB_DEVICE(0x2040, 0x026d),
.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
{ USB_DEVICE(0x2040, 0x826d),
.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
{ USB_DEVICE(0x0438, 0xb002),
.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
{ USB_DEVICE(0x2001, 0xf112),
.driver_info = EM2820_BOARD_DLINK_USB_TV },
{ USB_DEVICE(0x2304, 0x0207),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x2304, 0x0208),
.driver_info = EM2820_BOARD_PINNACLE_USB_2 },
{ USB_DEVICE(0x2304, 0x021a),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x2304, 0x0226),
.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
{ USB_DEVICE(0x2304, 0x0227),
.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
{ USB_DEVICE(0x2304, 0x023f),
.driver_info = EM2874_BOARD_PCTV_HD_MINI_80E },
{ USB_DEVICE(0x0413, 0x6023),
.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
{ USB_DEVICE(0x093b, 0xa003),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x093b, 0xa005),
.driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
{ USB_DEVICE(0x04bb, 0x0515),
.driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
{ USB_DEVICE(0xeb1a, 0x50a6),
.driver_info = EM2860_BOARD_GADMEI_UTV330 },
{ USB_DEVICE(0x1b80, 0xa340),
.driver_info = EM2870_BOARD_KWORLD_A340 },
{ USB_DEVICE(0x1b80, 0xe346),
.driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
{ USB_DEVICE(0x1b80, 0xe34c),
.driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 },
{ USB_DEVICE(0x2013, 0x024f),
.driver_info = EM28174_BOARD_PCTV_290E },
{ USB_DEVICE(0x2013, 0x024c),
.driver_info = EM28174_BOARD_PCTV_460E },
{ USB_DEVICE(0x2040, 0x1605),
.driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
{ USB_DEVICE(0x1b80, 0xe755),
.driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
{ USB_DEVICE(0xeb1a, 0x5006),
.driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
{ USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
.driver_info = EM2860_BOARD_EASYCAP },
{ USB_DEVICE(0x1b80, 0xe425),
.driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
{ USB_DEVICE(0x2304, 0x0242),
.driver_info = EM2884_BOARD_PCTV_510E },
{ USB_DEVICE(0x2013, 0x0251),
.driver_info = EM2884_BOARD_PCTV_520E },
{ USB_DEVICE(0x1b80, 0xe1cc),
.driver_info = EM2874_BOARD_DELOCK_61959 },
{ USB_DEVICE(0x1ae7, 0x9003),
.driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
{ USB_DEVICE(0x1ae7, 0x9004),
.driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
{ USB_DEVICE(0x2013, 0x0258),
.driver_info = EM28178_BOARD_PCTV_461E },
{ USB_DEVICE(0x2013, 0x025f),
.driver_info = EM28178_BOARD_PCTV_292E },
{ USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */
.driver_info = EM28178_BOARD_PCTV_292E },
{ USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */
.driver_info = EM28178_BOARD_PCTV_292E },
{ USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */
.driver_info = EM28178_BOARD_PCTV_292E },
{ USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */
.driver_info = EM28178_BOARD_PCTV_292E },
{ USB_DEVICE(0x0413, 0x6f07),
.driver_info = EM2861_BOARD_LEADTEK_VC100 },
{ USB_DEVICE(0xeb1a, 0x8179),
.driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
{ USB_DEVICE(0x3275, 0x0085),
.driver_info = EM28178_BOARD_PLEX_PX_BCUD },
{ USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */
.driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
/*
* EEPROM hash table for devices with generic USB IDs
*/
static const struct em28xx_hash_table em28xx_eeprom_hash[] = {
/* P/N: SA 60002070465 Tuner: TVF7533-MF */
{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
{0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
{0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
{0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
static const struct em28xx_hash_table em28xx_i2c_hash[] = {
{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
{0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
{0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
};
/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
{
struct em28xx_i2c_bus *i2c_bus = ptr;
struct em28xx *dev = i2c_bus->dev;
int rc = 0;
if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
return 0;
if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
return 0;
rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
return rc;
}
EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev)
{
const struct em28xx_board *board = &em28xx_boards[dev->model];
u8 xclk = board->xclk, i2c_speed = board->i2c_speed;
/*
* Those are the default values for the majority of boards
* Use those values if not specified otherwise at boards entry
*/
if (!xclk)
xclk = EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ;
em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
if (!i2c_speed)
i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ;
dev->i2c_speed = i2c_speed & 0x03;
if (!dev->board.is_em2800)
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed);
msleep(50);
}
static inline void em28xx_set_model(struct em28xx *dev)
{
dev->board = em28xx_boards[dev->model];
dev->has_msp34xx = dev->board.has_msp34xx;
dev->is_webcam = dev->board.is_webcam;
em28xx_set_xclk_i2c_speed(dev);
/* Should be initialized early, for I2C to work */
dev->def_i2c_bus = dev->board.def_i2c_bus;
}
/*
* Wait until AC97_RESET reports the expected value reliably before proceeding.
* We also check that two unrelated registers accesses don't return the same
* value to avoid premature return.
* This procedure helps ensuring AC97 register accesses are reliable.
*/
static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev,
int expected_feat)
{
unsigned long timeout = jiffies + msecs_to_jiffies(2000);
int feat, powerdown;
while (time_is_after_jiffies(timeout)) {
feat = em28xx_read_ac97(dev, AC97_RESET);
if (feat < 0)
return feat;
powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN);
if (powerdown < 0)
return powerdown;
if (feat == expected_feat && feat != powerdown)
return 0;
msleep(50);
}
dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n");
return -ETIMEDOUT;
}
/*
* Since em28xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs
*/
static void em28xx_pre_card_setup(struct em28xx *dev)
{
/*
* Set the initial XCLK and I2C clock values based on the board
* definition
*/
em28xx_set_xclk_i2c_speed(dev);
/* request some modules */
switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
/* Sets the msp34xx I2S speed */
dev->i2s_speed = 2048000;
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
usleep_range(10000, 11000);
break;
case EM2870_BOARD_COMPRO_VIDEOMATE:
/*
* TODO: someone can do some cleanup here...
* not everything's needed
*/
em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
msleep(70);
break;
case EM2870_BOARD_TERRATEC_XS_MT2060:
/*
* this device needs some gpio writes to get the DVB-T
* demod work
*/
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(70);
break;
case EM2870_BOARD_PINNACLE_PCTV_DVB:
/*
* this device needs some gpio writes to get the
* DVB-T demod work
*/
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(70);
break;
case EM2820_BOARD_GADMEI_UTV310:
case EM2820_BOARD_MSI_VOX_USB_2:
/* enables audio for that devices */
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
break;
case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
usleep_range(10000, 11000);
break;
case EM2860_BOARD_KAIOMY_TVNPC_U2:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_regs(dev, 0x0d, "\x42", 1);
em28xx_write_regs(dev, 0x08, "\xfd", 1);
usleep_range(10000, 11000);
em28xx_write_regs(dev, 0x08, "\xff", 1);
usleep_range(10000, 11000);
em28xx_write_regs(dev, 0x08, "\x7f", 1);
usleep_range(10000, 11000);
em28xx_write_regs(dev, 0x08, "\x6b", 1);
break;
case EM2860_BOARD_EASYCAP:
em28xx_write_regs(dev, 0x08, "\xf8", 1);
break;
case EM2820_BOARD_IODATA_GVMVP_SZ:
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
msleep(70);
break;
case EM2860_BOARD_TERRATEC_GRABBY:
/*
* HACK?: Ensure AC97 register reading is reliable before
* proceeding. In practice, this will wait about 1.6 seconds.
*/
em28xx_wait_until_ac97_features_equals(dev, 0x6a90);
break;
}
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
/* Unlock device */
em28xx_set_mode(dev, EM28XX_SUSPEND);
}
static int em28xx_hint_board(struct em28xx *dev)
{
int i;
if (dev->is_webcam) {
if (dev->em28xx_sensor == EM28XX_MT9V011) {
dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
} else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
dev->em28xx_sensor == EM28XX_MT9M111) {
dev->model = EM2750_BOARD_UNKNOWN;
}
/* FIXME: IMPROVE ! */
return 0;
}
/*
* HINT method: EEPROM
*
* This method works only for boards with eeprom.
* Uses a hash of all eeprom bytes. The hash should be
* unique for a vendor/tuner pair.
* There are a high chance that tuners for different
* video standards produce different hashes.
*/
for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
if (dev->hash == em28xx_eeprom_hash[i].hash) {
dev->model = em28xx_eeprom_hash[i].model;
dev->tuner_type = em28xx_eeprom_hash[i].tuner;
dev_err(&dev->intf->dev,
"Your board has no unique USB ID.\n"
"A hint were successfully done, based on eeprom hash.\n"
"This method is not 100%% failproof.\n"
"If the board were misdetected, please email this log to:\n"
"\tV4L Mailing List <linux-media@vger.kernel.org>\n"
"Board detected as %s\n",
em28xx_boards[dev->model].name);
return 0;
}
}
/*
* HINT method: I2C attached devices
*
* This method works for all boards.
* Uses a hash of i2c scanned devices.
* Devices with the same i2c attached chips will
* be considered equal.
* This method is less precise than the eeprom one.
*/
/* user did not request i2c scanning => do it now */
if (!dev->i2c_hash)
em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
dev->model = em28xx_i2c_hash[i].model;
dev->tuner_type = em28xx_i2c_hash[i].tuner;
dev_err(&dev->intf->dev,
"Your board has no unique USB ID.\n"
"A hint were successfully done, based on i2c devicelist hash.\n"
"This method is not 100%% failproof.\n"
"If the board were misdetected, please email this log to:\n"
"\tV4L Mailing List <linux-media@vger.kernel.org>\n"
"Board detected as %s\n",
em28xx_boards[dev->model].name);
return 0;
}
}
dev_err(&dev->intf->dev,
"Your board has no unique USB ID and thus need a hint to be detected.\n"
"You may try to use card=<n> insmod option to workaround that.\n"
"Please send an email with this log to:\n"
"\tV4L Mailing List <linux-media@vger.kernel.org>\n"
"Board eeprom hash is 0x%08lx\n"
"Board i2c devicelist hash is 0x%08lx\n",
dev->hash, dev->i2c_hash);
dev_err(&dev->intf->dev,
"Here is a list of valid choices for the card=<n> insmod option:\n");
for (i = 0; i < em28xx_bcount; i++) {
dev_err(&dev->intf->dev,
" card=%d -> %s\n", i, em28xx_boards[i].name);
}
return -1;
}
static void em28xx_card_setup(struct em28xx *dev)
{
int i, j, idx;
bool duplicate_entry;
/*
* If the device can be a webcam, seek for a sensor.
* If sensor is not found, then it isn't a webcam.
*/
if (dev->is_webcam) {
em28xx_detect_sensor(dev);
if (dev->em28xx_sensor == EM28XX_NOSENSOR)
/* NOTE: error/unknown sensor/no sensor */
dev->is_webcam = 0;
}
switch (dev->model) {
case EM2750_BOARD_UNKNOWN:
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
/*
* The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
*
* This occurs because they share identical USB vendor and
* product IDs.
*
* What we do here is look up the EEPROM hash of the K-WORLD
* and if it is found then we decide that we do not have
* a DIGIVOX and reset the device to the K-WORLD instead.
*
* This solution is only valid if they do not share eeprom
* hash identities which has not been determined as yet.
*/
if (em28xx_hint_board(dev) < 0) {
dev_err(&dev->intf->dev, "Board not discovered\n");
} else {
em28xx_set_model(dev);
em28xx_pre_card_setup(dev);
}
break;
default:
em28xx_set_model(dev);
}
dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n",
dev->board.name, dev->model);
dev->tuner_type = em28xx_boards[dev->model].tuner_type;
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595:
{
struct tveeprom tv;
if (!dev->eedata)
break;
#if defined(CONFIG_MODULES) && defined(MODULE)
request_module("tveeprom");
#endif
/* Call first TVeeprom */
tveeprom_hauppauge_analog(&tv, dev->eedata);
dev->tuner_type = tv.tuner_type;
if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
dev->i2s_speed = 2048000;
dev->has_msp34xx = 1;
}
break;
}
case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, 0x0d, 0x42);
usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
usleep_range(10000, 11000);
break;
case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
break;
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
/*
* The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
*
* This occurs because they share identical USB vendor and
* product IDs.
*
* What we do here is look up the EEPROM hash of the K-WORLD
* and if it is found then we decide that we do not have
* a DIGIVOX and reset the device to the K-WORLD instead.
*
* This solution is only valid if they do not share eeprom
* hash identities which has not been determined as yet.
*/
case EM2880_BOARD_MSI_DIGIVOX_AD:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
/*
* In cases where we had to use a board hint, the call to
* em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
* so make the call now so the analog GPIOs are set properly
* before probing the i2c bus.
*/
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
/*
* The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
*
* This occurs because they share identical USB vendor and
* product IDs.
*
* What we do here is look up the EEPROM hash of the Dikom
* and if it is found then we decide that we do not have
* a Kworld and reset the device to the Dikom instead.
*
* This solution is only valid if they do not share eeprom
* hash identities which has not been determined as yet.
*/
case EM2882_BOARD_KWORLD_VS_DVBT:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
/*
* In cases where we had to use a board hint, the call to
* em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
* so make the call now so the analog GPIOs are set properly
* before probing the i2c bus.
*/
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
}
if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
dev_err(&dev->intf->dev,
"\n\n"
"The support for this board weren't valid yet.\n"
"Please send a report of having this working\n"
"not to V4L mailing list (and/or to other addresses)\n\n");
}
/* Free eeprom data memory */
kfree(dev->eedata);
dev->eedata = NULL;
/* Allow override tuner type by a module parameter */
if (tuner >= 0)
dev->tuner_type = tuner;
/*
* Dynamically generate a list of valid audio inputs for this
* specific board, mapping them via enum em28xx_amux.
*/
idx = 0;
for (i = 0; i < MAX_EM28XX_INPUT; i++) {
if (!INPUT(i)->type)
continue;
/* Skip already mapped audio inputs */
duplicate_entry = false;
for (j = 0; j < idx; j++) {
if (INPUT(i)->amux == dev->amux_map[j]) {
duplicate_entry = true;
break;
}
}
if (duplicate_entry)
continue;
dev->amux_map[idx++] = INPUT(i)->amux;
}
for (; idx < MAX_EM28XX_INPUT; idx++)
dev->amux_map[idx] = EM28XX_AMUX_UNUSED;
}
void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
{
memset(ctl, 0, sizeof(*ctl));
ctl->fname = XC2028_DEFAULT_FIRMWARE;
ctl->max_len = 64;
ctl->mts = em28xx_boards[dev->model].mts_firmware;
switch (dev->model) {
case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2882_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
case EM2881_BOARD_PINNACLE_HYBRID_PRO:
case EM2882_BOARD_ZOLID_HYBRID_TV_STICK:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
ctl->demod = XC3028_FE_DEFAULT;
break;
case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
ctl->demod = XC3028_FE_DEFAULT;
ctl->fname = XC3028L_DEFAULT_FIRMWARE;
break;
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
/* FIXME: Better to specify the needed IF */
ctl->demod = XC3028_FE_DEFAULT;
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
case EM2882_BOARD_DIKOM_DK300:
case EM2882_BOARD_KWORLD_VS_DVBT:
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC2028_DEFAULT_FIRMWARE;
break;
case EM2882_BOARD_EVGA_INDTUBE:
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC3028L_DEFAULT_FIRMWARE;
break;
default:
ctl->demod = XC3028_FE_OREN538;
}
}
EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);
static void request_module_async(struct work_struct *work)
{
struct em28xx *dev = container_of(work,
struct em28xx, request_module_wk);
/*
* The em28xx extensions can be modules or builtin. If the
* modules are already loaded or are built in, those extensions
* can be initialised right now. Otherwise, the module init
* code will do it.
*/
/*
* Devices with an audio-only intf also have a V4L/DVB/RC
* intf. Don't register extensions twice on those devices.
*/
if (dev->is_audio_only) {
#if defined(CONFIG_MODULES) && defined(MODULE)
request_module("em28xx-alsa");
#endif
return;
}
em28xx_init_extension(dev);
#if defined(CONFIG_MODULES) && defined(MODULE)
if (dev->has_video)
request_module("em28xx-v4l");
if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS)
request_module("snd-usb-audio");
else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
request_module("em28xx-alsa");
if (dev->board.has_dvb)
request_module("em28xx-dvb");
if (dev->board.buttons ||
((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
request_module("em28xx-rc");
#endif /* CONFIG_MODULES */
}
static void request_modules(struct em28xx *dev)
{
INIT_WORK(&dev->request_module_wk, request_module_async);
schedule_work(&dev->request_module_wk);
}
static void flush_request_modules(struct em28xx *dev)
{
flush_work(&dev->request_module_wk);
}
static int em28xx_media_device_init(struct em28xx *dev,
struct usb_device *udev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_device *mdev;
mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
if (!mdev)
return -ENOMEM;
if (udev->product)
media_device_usb_init(mdev, udev, udev->product);
else if (udev->manufacturer)
media_device_usb_init(mdev, udev, udev->manufacturer);
else
media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev));
dev->media_dev = mdev;
#endif
return 0;
}
static void em28xx_unregister_media_device(struct em28xx *dev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
if (dev->media_dev) {
media_device_unregister(dev->media_dev);
media_device_cleanup(dev->media_dev);
kfree(dev->media_dev);
dev->media_dev = NULL;
}
#endif
}
/*
* em28xx_release_resources()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconnected or at module unload
*/
static void em28xx_release_resources(struct em28xx *dev)
{
struct usb_device *udev = interface_to_usbdev(dev->intf);
/*FIXME: I2C IR should be disconnected */
mutex_lock(&dev->lock);
em28xx_unregister_media_device(dev);
if (dev->def_i2c_bus)
em28xx_i2c_unregister(dev, 1);
em28xx_i2c_unregister(dev, 0);
if (dev->ts == PRIMARY_TS)
usb_put_dev(udev);
/* Mark device as unused */
clear_bit(dev->devno, em28xx_devused);
mutex_unlock(&dev->lock);
};
/**
* em28xx_free_device() - Free em28xx device
*
* @ref: struct kref for em28xx device
*
* This is called when all extensions and em28xx core unregisters a device
*/
void em28xx_free_device(struct kref *ref)
{
struct em28xx *dev = kref_to_dev(ref);
dev_info(&dev->intf->dev, "Freeing device\n");
if (!dev->disconnected)
em28xx_release_resources(dev);
if (dev->ts == PRIMARY_TS)
kfree(dev->alt_max_pkt_size_isoc);
kfree(dev);
}
EXPORT_SYMBOL_GPL(em28xx_free_device);
/*
* em28xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
*/
static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
struct usb_interface *intf,
int minor)
{
int retval;
const char *chip_name = NULL;
dev->intf = intf;
mutex_init(&dev->ctrl_urb_lock);
spin_lock_init(&dev->slock);
dev->em28xx_write_regs = em28xx_write_regs;
dev->em28xx_read_reg = em28xx_read_reg;
dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
dev->em28xx_write_regs_req = em28xx_write_regs_req;
dev->em28xx_read_reg_req = em28xx_read_reg_req;
dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
em28xx_set_model(dev);
dev->wait_after_write = 5;
/* Based on the Chip ID, set the device configuration */
retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
if (retval > 0) {
dev->chip_id = retval;
switch (dev->chip_id) {
case CHIP_ID_EM2800:
chip_name = "em2800";
break;
case CHIP_ID_EM2710:
chip_name = "em2710";
break;
case CHIP_ID_EM2750:
chip_name = "em2750";
break;
case CHIP_ID_EM2765:
chip_name = "em2765";
dev->wait_after_write = 0;
dev->is_em25xx = 1;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM2820:
chip_name = "em2710/2820";
if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) {
__le16 idProd = udev->descriptor.idProduct;
if (le16_to_cpu(idProd) == 0x2710)
chip_name = "em2710";
else if (le16_to_cpu(idProd) == 0x2820)
chip_name = "em2820";
}
/* NOTE: the em2820 is used in webcams, too ! */
break;
case CHIP_ID_EM2840:
chip_name = "em2840";
break;
case CHIP_ID_EM2860:
chip_name = "em2860";
break;
case CHIP_ID_EM2870:
chip_name = "em2870";
dev->wait_after_write = 0;
break;
case CHIP_ID_EM2874:
chip_name = "em2874";
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM28174:
chip_name = "em28174";
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM28178:
chip_name = "em28178";
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM2883:
chip_name = "em2882/3";
dev->wait_after_write = 0;
break;
case CHIP_ID_EM2884:
chip_name = "em2884";
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
}
}
if (!chip_name)
dev_info(&dev->intf->dev,
"unknown em28xx chip ID (%d)\n", dev->chip_id);
else
dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name);
em28xx_media_device_init(dev, udev);
if (dev->is_audio_only) {
retval = em28xx_audio_setup(dev);
if (retval)
return -ENODEV;
em28xx_init_extension(dev);
return 0;
}
em28xx_pre_card_setup(dev);
rt_mutex_init(&dev->i2c_bus_lock);
/* register i2c bus 0 */
if (dev->board.is_em2800)
retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
else
retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
if (retval < 0) {
dev_err(&dev->intf->dev,
"%s: em28xx_i2c_register bus 0 - error [%d]!\n",
__func__, retval);
return retval;
}
/* register i2c bus 1 */
if (dev->def_i2c_bus) {
if (dev->is_em25xx)
retval = em28xx_i2c_register(dev, 1,
EM28XX_I2C_ALGO_EM25XX_BUS_B);
else
retval = em28xx_i2c_register(dev, 1,
EM28XX_I2C_ALGO_EM28XX);
if (retval < 0) {
dev_err(&dev->intf->dev,
"%s: em28xx_i2c_register bus 1 - error [%d]!\n",
__func__, retval);
em28xx_i2c_unregister(dev, 0);
return retval;
}
}
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
return 0;
}
static int em28xx_duplicate_dev(struct em28xx *dev)
{
int nr;
struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL);
if (!sec_dev) {
dev->dev_next = NULL;
return -ENOMEM;
}
/* Check to see next free device and mark as used */
do {
nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
if (nr >= EM28XX_MAXBOARDS) {
/* No free device slots */
dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n",
EM28XX_MAXBOARDS);
kfree(sec_dev);
dev->dev_next = NULL;
return -ENOMEM;
}
} while (test_and_set_bit(nr, em28xx_devused));
sec_dev->devno = nr;
snprintf(sec_dev->name, 28, "em28xx #%d", nr);
sec_dev->dev_next = NULL;
dev->dev_next = sec_dev;
return 0;
}
/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
static void em28xx_check_usb_descriptor(struct em28xx *dev,
struct usb_device *udev,
struct usb_interface *intf,
int alt, int ep,
bool *has_vendor_audio,
bool *has_video,
bool *has_dvb)
{
const struct usb_endpoint_descriptor *e;
int sizedescr, size;
/*
* NOTE:
*
* Old logic with support for isoc transfers only was:
* 0x82 isoc => analog
* 0x83 isoc => audio
* 0x84 isoc => digital
*
* New logic with support for bulk transfers
* 0x82 isoc => analog
* 0x82 bulk => analog
* 0x83 isoc* => audio
* 0x84 isoc => digital
* 0x84 bulk => analog or digital**
* 0x85 isoc => digital TS2
* 0x85 bulk => digital TS2
* (*: audio should always be isoc)
* (**: analog, if ep 0x82 is isoc, otherwise digital)
*
* The new logic preserves backwards compatibility and
* reflects the endpoint configurations we have seen
* so far. But there might be devices for which this
* logic is not sufficient...
*/
e = &intf->altsetting[alt].endpoint[ep].desc;
if (!usb_endpoint_dir_in(e))
return;
sizedescr = le16_to_cpu(e->wMaxPacketSize);
size = sizedescr & 0x7ff;
if (udev->speed == USB_SPEED_HIGH)
size = size * hb_mult(sizedescr);
/* Only inspect input endpoints */
switch (e->bEndpointAddress) {
case 0x82:
*has_video = true;
if (usb_endpoint_xfer_isoc(e)) {
dev->analog_ep_isoc = e->bEndpointAddress;
dev->alt_max_pkt_size_isoc[alt] = size;
} else if (usb_endpoint_xfer_bulk(e)) {
dev->analog_ep_bulk = e->bEndpointAddress;
}
return;
case 0x83:
if (usb_endpoint_xfer_isoc(e))
*has_vendor_audio = true;
else
dev_err(&intf->dev,
"error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
return;
case 0x84:
if (*has_video && (usb_endpoint_xfer_bulk(e))) {
dev->analog_ep_bulk = e->bEndpointAddress;
} else {
if (usb_endpoint_xfer_isoc(e)) {
if (size > dev->dvb_max_pkt_size_isoc) {
/*
* 2) some manufacturers (e.g. Terratec)
* disable endpoints by setting
* wMaxPacketSize to 0 bytes for all
* alt settings. So far, we've seen
* this for DVB isoc endpoints only.
*/
*has_dvb = true;
dev->dvb_ep_isoc = e->bEndpointAddress;
dev->dvb_max_pkt_size_isoc = size;
dev->dvb_alt_isoc = alt;
}
} else {
*has_dvb = true;
dev->dvb_ep_bulk = e->bEndpointAddress;
}
}
return;
case 0x85:
if (usb_endpoint_xfer_isoc(e)) {
if (size > dev->dvb_max_pkt_size_isoc_ts2) {
dev->dvb_ep_isoc_ts2 = e->bEndpointAddress;
dev->dvb_max_pkt_size_isoc_ts2 = size;
dev->dvb_alt_isoc = alt;
}
} else {
dev->dvb_ep_bulk_ts2 = e->bEndpointAddress;
}
return;
}
}
/*
* em28xx_usb_probe()
* checks for supported devices
*/
static int em28xx_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev;
struct em28xx *dev = NULL;
int retval;
bool has_vendor_audio = false, has_video = false, has_dvb = false;
int i, nr, try_bulk;
const int ifnum = intf->altsetting[0].desc.bInterfaceNumber;
char *speed;
udev = usb_get_dev(interface_to_usbdev(intf));
/* Check to see next free device and mark as used */
do {
nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
if (nr >= EM28XX_MAXBOARDS) {
/* No free device slots */
dev_err(&intf->dev,
"Driver supports up to %i em28xx boards.\n",
EM28XX_MAXBOARDS);
retval = -ENOMEM;
goto err_no_slot;
}
} while (test_and_set_bit(nr, em28xx_devused));
/* Don't register audio interfaces */
if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
dev_info(&intf->dev,
"audio device (%04x:%04x): interface %i, class %i\n",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
ifnum,
intf->altsetting[0].desc.bInterfaceClass);
retval = -ENODEV;
goto err;
}
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
retval = -ENOMEM;
goto err;
}
/* compute alternate max packet sizes */
dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting,
sizeof(dev->alt_max_pkt_size_isoc[0]),
GFP_KERNEL);
if (!dev->alt_max_pkt_size_isoc) {
kfree(dev);
retval = -ENOMEM;
goto err;
}
/* Get endpoints */
for (i = 0; i < intf->num_altsetting; i++) {
int ep;
for (ep = 0;
ep < intf->altsetting[i].desc.bNumEndpoints;
ep++)
em28xx_check_usb_descriptor(dev, udev, intf,
i, ep,
&has_vendor_audio,
&has_video,
&has_dvb);
}
if (!(has_vendor_audio || has_video || has_dvb)) {
retval = -ENODEV;
goto err_free;
}
switch (udev->speed) {
case USB_SPEED_LOW:
speed = "1.5";
break;
case USB_SPEED_UNKNOWN:
case USB_SPEED_FULL:
speed = "12";
break;
case USB_SPEED_HIGH:
speed = "480";
break;
default:
speed = "unknown";
}
dev_info(&intf->dev,
"New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n",
udev->manufacturer ? udev->manufacturer : "",
udev->product ? udev->product : "",
speed,
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
ifnum,
intf->altsetting->desc.bInterfaceNumber);
/*
* Make sure we have 480 Mbps of bandwidth, otherwise things like
* video stream wouldn't likely work, since 12 Mbps is generally
* not enough even for most Digital TV streams.
*/
if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
dev_err(&intf->dev, "Device initialization failed.\n");
dev_err(&intf->dev,
"Device must be connected to a high-speed USB 2.0 port.\n");
retval = -ENODEV;
goto err_free;
}
dev->devno = nr;
dev->model = id->driver_info;
dev->alt = -1;
dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb);
dev->has_video = has_video;
dev->ifnum = ifnum;
dev->ts = PRIMARY_TS;
snprintf(dev->name, 28, "em28xx");
dev->dev_next = NULL;
if (has_vendor_audio) {
dev_info(&intf->dev,
"Audio interface %i found (Vendor Class)\n", ifnum);
dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR;
}
/* Checks if audio is provided by a USB Audio Class intf */
for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
struct usb_interface *uif = udev->config->interface[i];
if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
if (has_vendor_audio)
dev_err(&intf->dev,
"em28xx: device seems to have vendor AND usb audio class interfaces !\n"
"\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n");
dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS;
break;
}
}
if (has_video)
dev_info(&intf->dev, "Video interface %i found:%s%s\n",
ifnum,
dev->analog_ep_bulk ? " bulk" : "",
dev->analog_ep_isoc ? " isoc" : "");
if (has_dvb)
dev_info(&intf->dev, "DVB interface %i found:%s%s\n",
ifnum,
dev->dvb_ep_bulk ? " bulk" : "",
dev->dvb_ep_isoc ? " isoc" : "");
dev->num_alt = intf->num_altsetting;
if ((unsigned int)card[nr] < em28xx_bcount)
dev->model = card[nr];
/* save our data pointer in this intf device */
usb_set_intfdata(intf, dev);
/* allocate device struct and check if the device is a webcam */
mutex_init(&dev->lock);
retval = em28xx_init_dev(dev, udev, intf, nr);
if (retval)
goto err_free;
if (usb_xfer_mode < 0) {
if (dev->is_webcam)
try_bulk = 1;
else
try_bulk = 0;
} else {
try_bulk = usb_xfer_mode > 0;
}
/* Disable V4L2 if the device doesn't have a decoder or image sensor */
if (has_video &&
dev->board.decoder == EM28XX_NODECODER &&
dev->em28xx_sensor == EM28XX_NOSENSOR) {
dev_err(&intf->dev,
"Currently, V4L2 is not supported on this model\n");
has_video = false;
dev->has_video = false;
}
if (dev->board.has_dual_ts &&
(dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) {
/*
* The logic with sets alternate is not ready for dual-tuners
* which analog modes.
*/
dev_err(&intf->dev,
"We currently don't support analog TV or stream capture on dual tuners.\n");
has_video = false;
}
/* Select USB transfer types to use */
if (has_video) {
if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
dev->analog_xfer_bulk = 1;
dev_info(&intf->dev, "analog set to %s mode.\n",
dev->analog_xfer_bulk ? "bulk" : "isoc");
}
if (has_dvb) {
if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
dev->dvb_xfer_bulk = 1;
dev_info(&intf->dev, "dvb set to %s mode.\n",
dev->dvb_xfer_bulk ? "bulk" : "isoc");
}
if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) {
dev->dev_next->ts = SECONDARY_TS;
dev->dev_next->alt = -1;
dev->dev_next->is_audio_only = has_vendor_audio &&
!(has_video || has_dvb);
dev->dev_next->has_video = false;
dev->dev_next->ifnum = ifnum;
dev->dev_next->model = id->driver_info;
mutex_init(&dev->dev_next->lock);
retval = em28xx_init_dev(dev->dev_next, udev, intf,
dev->dev_next->devno);
if (retval)
goto err_free;
dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */
dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */
if (usb_xfer_mode < 0) {
if (dev->dev_next->is_webcam)
try_bulk = 1;
else
try_bulk = 0;
} else {
try_bulk = usb_xfer_mode > 0;
}
/* Select USB transfer types to use */
if (has_dvb) {
if (!dev->dvb_ep_isoc_ts2 ||
(try_bulk && dev->dvb_ep_bulk_ts2))
dev->dev_next->dvb_xfer_bulk = 1;
dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n",
dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc");
}
dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2;
dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2;
dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2;
dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc;
/* Configuare hardware to support TS2*/
if (dev->dvb_xfer_bulk) {
/* The ep4 and ep5 are configuared for BULK */
em28xx_write_reg(dev, 0x0b, 0x96);
mdelay(100);
em28xx_write_reg(dev, 0x0b, 0x80);
mdelay(100);
} else {
/* The ep4 and ep5 are configuared for ISO */
em28xx_write_reg(dev, 0x0b, 0x96);
mdelay(100);
em28xx_write_reg(dev, 0x0b, 0x82);
mdelay(100);
}
kref_init(&dev->dev_next->ref);
}
kref_init(&dev->ref);
request_modules(dev);
/*
* Do it at the end, to reduce dynamic configuration changes during
* the device init. Yet, as request_modules() can be async, the
* topology will likely change after the load of the em28xx subdrivers.
*/
#ifdef CONFIG_MEDIA_CONTROLLER
retval = media_device_register(dev->media_dev);
#endif
return 0;
err_free:
kfree(dev->alt_max_pkt_size_isoc);
kfree(dev);
err:
clear_bit(nr, em28xx_devused);
err_no_slot:
usb_put_dev(udev);
return retval;
}
/*
* em28xx_usb_disconnect()
* called when the device gets disconnected
* video device will be unregistered on v4l2_close in case it is still open
*/
static void em28xx_usb_disconnect(struct usb_interface *intf)
{
struct em28xx *dev;
dev = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (!dev)
return;
if (dev->dev_next) {
dev->dev_next->disconnected = 1;
dev_info(&dev->intf->dev, "Disconnecting %s\n",
dev->dev_next->name);
}
dev->disconnected = 1;
dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name);
flush_request_modules(dev);
em28xx_close_extension(dev);
if (dev->dev_next)
em28xx_release_resources(dev->dev_next);
em28xx_release_resources(dev);
if (dev->dev_next) {
kref_put(&dev->dev_next->ref, em28xx_free_device);
dev->dev_next = NULL;
}
kref_put(&dev->ref, em28xx_free_device);
}
static int em28xx_usb_suspend(struct usb_interface *intf,
pm_message_t message)
{
struct em28xx *dev;
dev = usb_get_intfdata(intf);
if (!dev)
return 0;
em28xx_suspend_extension(dev);
return 0;
}
static int em28xx_usb_resume(struct usb_interface *intf)
{
struct em28xx *dev;
dev = usb_get_intfdata(intf);
if (!dev)
return 0;
em28xx_resume_extension(dev);
return 0;
}
static struct usb_driver em28xx_usb_driver = {
.name = "em28xx",
.probe = em28xx_usb_probe,
.disconnect = em28xx_usb_disconnect,
.suspend = em28xx_usb_suspend,
.resume = em28xx_usb_resume,
.reset_resume = em28xx_usb_resume,
.id_table = em28xx_id_table,
};
module_usb_driver(em28xx_usb_driver);