Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
// SPDX-License-Identifier: GPL-2.0-only
/*
 * USB block power/access management abstraction.
 *
 * Au1000+: The OHCI block control register is at the far end of the OHCI memory
 *	    area. Au1550 has OHCI on different base address. No need to handle
 *	    UDC here.
 * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
 *	    as well as the PHY for EHCI and UDC.
 *
 */

#include <linux/clk.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/syscore_ops.h>
#include <asm/cpu.h>
#include <asm/mach-au1x00/au1000.h>

/* control register offsets */
#define AU1000_OHCICFG	0x7fffc
#define AU1550_OHCICFG	0x07ffc
#define AU1200_USBCFG	0x04

/* Au1000 USB block config bits */
#define USBHEN_RD	(1 << 4)		/* OHCI reset-done indicator */
#define USBHEN_CE	(1 << 3)		/* OHCI block clock enable */
#define USBHEN_E	(1 << 2)		/* OHCI block enable */
#define USBHEN_C	(1 << 1)		/* OHCI block coherency bit */
#define USBHEN_BE	(1 << 0)		/* OHCI Big-Endian */

/* Au1200 USB config bits */
#define USBCFG_PFEN	(1 << 31)		/* prefetch enable (undoc) */
#define USBCFG_RDCOMB	(1 << 30)		/* read combining (undoc) */
#define USBCFG_UNKNOWN	(5 << 20)		/* unknown, leave this way */
#define USBCFG_SSD	(1 << 23)		/* serial short detect en */
#define USBCFG_PPE	(1 << 19)		/* HS PHY PLL */
#define USBCFG_UCE	(1 << 18)		/* UDC clock enable */
#define USBCFG_ECE	(1 << 17)		/* EHCI clock enable */
#define USBCFG_OCE	(1 << 16)		/* OHCI clock enable */
#define USBCFG_FLA(x)	(((x) & 0x3f) << 8)
#define USBCFG_UCAM	(1 << 7)		/* coherent access (undoc) */
#define USBCFG_GME	(1 << 6)		/* OTG mem access */
#define USBCFG_DBE	(1 << 5)		/* UDC busmaster enable */
#define USBCFG_DME	(1 << 4)		/* UDC mem enable */
#define USBCFG_EBE	(1 << 3)		/* EHCI busmaster enable */
#define USBCFG_EME	(1 << 2)		/* EHCI mem enable */
#define USBCFG_OBE	(1 << 1)		/* OHCI busmaster enable */
#define USBCFG_OME	(1 << 0)		/* OHCI mem enable */
#define USBCFG_INIT_AU1200	(USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
				 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
				 USBCFG_GME | USBCFG_DBE | USBCFG_DME |	       \
				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
				 USBCFG_OME)

/* Au1300 USB config registers */
#define USB_DWC_CTRL1		0x00
#define USB_DWC_CTRL2		0x04
#define USB_VBUS_TIMER		0x10
#define USB_SBUS_CTRL		0x14
#define USB_MSR_ERR		0x18
#define USB_DWC_CTRL3		0x1C
#define USB_DWC_CTRL4		0x20
#define USB_OTG_STATUS		0x28
#define USB_DWC_CTRL5		0x2C
#define USB_DWC_CTRL6		0x30
#define USB_DWC_CTRL7		0x34
#define USB_PHY_STATUS		0xC0
#define USB_INT_STATUS		0xC4
#define USB_INT_ENABLE		0xC8

#define USB_DWC_CTRL1_OTGD	0x04 /* set to DISable OTG */
#define USB_DWC_CTRL1_HSTRS	0x02 /* set to ENable EHCI */
#define USB_DWC_CTRL1_DCRS	0x01 /* set to ENable UDC */

#define USB_DWC_CTRL2_PHY1RS	0x04 /* set to enable PHY1 */
#define USB_DWC_CTRL2_PHY0RS	0x02 /* set to enable PHY0 */
#define USB_DWC_CTRL2_PHYRS	0x01 /* set to enable PHY */

#define USB_DWC_CTRL3_OHCI1_CKEN	(1 << 19)
#define USB_DWC_CTRL3_OHCI0_CKEN	(1 << 18)
#define USB_DWC_CTRL3_EHCI0_CKEN	(1 << 17)
#define USB_DWC_CTRL3_OTG0_CKEN		(1 << 16)

#define USB_SBUS_CTRL_SBCA		0x04 /* coherent access */

#define USB_INTEN_FORCE			0x20
#define USB_INTEN_PHY			0x10
#define USB_INTEN_UDC			0x08
#define USB_INTEN_EHCI			0x04
#define USB_INTEN_OHCI1			0x02
#define USB_INTEN_OHCI0			0x01

static DEFINE_SPINLOCK(alchemy_usb_lock);

static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
{
	unsigned long r, s;

	r = __raw_readl(base + USB_DWC_CTRL2);
	s = __raw_readl(base + USB_DWC_CTRL3);

	s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
		USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;

	if (enable) {
		/* simply enable all PHYs */
		r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
		     USB_DWC_CTRL2_PHYRS;
		__raw_writel(r, base + USB_DWC_CTRL2);
		wmb();
	} else if (!s) {
		/* no USB block active, do disable all PHYs */
		r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
		       USB_DWC_CTRL2_PHYRS);
		__raw_writel(r, base + USB_DWC_CTRL2);
		wmb();
	}
}

static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
{
	unsigned long r;

	if (enable) {
		__raw_writel(1, base + USB_DWC_CTRL7);	/* start OHCI clock */
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */
		r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
			       : USB_DWC_CTRL3_OHCI1_CKEN;
		__raw_writel(r, base + USB_DWC_CTRL3);
		wmb();

		__au1300_usb_phyctl(base, enable);	/* power up the PHYs */

		r = __raw_readl(base + USB_INT_ENABLE);
		r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
		__raw_writel(r, base + USB_INT_ENABLE);
		wmb();

		/* reset the OHCI start clock bit */
		__raw_writel(0, base + USB_DWC_CTRL7);
		wmb();
	} else {
		r = __raw_readl(base + USB_INT_ENABLE);
		r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
		__raw_writel(r, base + USB_INT_ENABLE);
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL3);
		r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
				 : USB_DWC_CTRL3_OHCI1_CKEN);
		__raw_writel(r, base + USB_DWC_CTRL3);
		wmb();

		__au1300_usb_phyctl(base, enable);
	}
}

static inline void __au1300_ehci_control(void __iomem *base, int enable)
{
	unsigned long r;

	if (enable) {
		r = __raw_readl(base + USB_DWC_CTRL3);
		r |= USB_DWC_CTRL3_EHCI0_CKEN;
		__raw_writel(r, base + USB_DWC_CTRL3);
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL1);
		r |= USB_DWC_CTRL1_HSTRS;
		__raw_writel(r, base + USB_DWC_CTRL1);
		wmb();

		__au1300_usb_phyctl(base, enable);

		r = __raw_readl(base + USB_INT_ENABLE);
		r |= USB_INTEN_EHCI;
		__raw_writel(r, base + USB_INT_ENABLE);
		wmb();
	} else {
		r = __raw_readl(base + USB_INT_ENABLE);
		r &= ~USB_INTEN_EHCI;
		__raw_writel(r, base + USB_INT_ENABLE);
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL1);
		r &= ~USB_DWC_CTRL1_HSTRS;
		__raw_writel(r, base + USB_DWC_CTRL1);
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL3);
		r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
		__raw_writel(r, base + USB_DWC_CTRL3);
		wmb();

		__au1300_usb_phyctl(base, enable);
	}
}

static inline void __au1300_udc_control(void __iomem *base, int enable)
{
	unsigned long r;

	if (enable) {
		r = __raw_readl(base + USB_DWC_CTRL1);
		r |= USB_DWC_CTRL1_DCRS;
		__raw_writel(r, base + USB_DWC_CTRL1);
		wmb();

		__au1300_usb_phyctl(base, enable);

		r = __raw_readl(base + USB_INT_ENABLE);
		r |= USB_INTEN_UDC;
		__raw_writel(r, base + USB_INT_ENABLE);
		wmb();
	} else {
		r = __raw_readl(base + USB_INT_ENABLE);
		r &= ~USB_INTEN_UDC;
		__raw_writel(r, base + USB_INT_ENABLE);
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL1);
		r &= ~USB_DWC_CTRL1_DCRS;
		__raw_writel(r, base + USB_DWC_CTRL1);
		wmb();

		__au1300_usb_phyctl(base, enable);
	}
}

static inline void __au1300_otg_control(void __iomem *base, int enable)
{
	unsigned long r;
	if (enable) {
		r = __raw_readl(base + USB_DWC_CTRL3);
		r |= USB_DWC_CTRL3_OTG0_CKEN;
		__raw_writel(r, base + USB_DWC_CTRL3);
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL1);
		r &= ~USB_DWC_CTRL1_OTGD;
		__raw_writel(r, base + USB_DWC_CTRL1);
		wmb();

		__au1300_usb_phyctl(base, enable);
	} else {
		r = __raw_readl(base + USB_DWC_CTRL1);
		r |= USB_DWC_CTRL1_OTGD;
		__raw_writel(r, base + USB_DWC_CTRL1);
		wmb();

		r = __raw_readl(base + USB_DWC_CTRL3);
		r &= ~USB_DWC_CTRL3_OTG0_CKEN;
		__raw_writel(r, base + USB_DWC_CTRL3);
		wmb();

		__au1300_usb_phyctl(base, enable);
	}
}

static inline int au1300_usb_control(int block, int enable)
{
	void __iomem *base =
		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
	int ret = 0;

	switch (block) {
	case ALCHEMY_USB_OHCI0:
		__au1300_ohci_control(base, enable, 0);
		break;
	case ALCHEMY_USB_OHCI1:
		__au1300_ohci_control(base, enable, 1);
		break;
	case ALCHEMY_USB_EHCI0:
		__au1300_ehci_control(base, enable);
		break;
	case ALCHEMY_USB_UDC0:
		__au1300_udc_control(base, enable);
		break;
	case ALCHEMY_USB_OTG0:
		__au1300_otg_control(base, enable);
		break;
	default:
		ret = -ENODEV;
	}
	return ret;
}

static inline void au1300_usb_init(void)
{
	void __iomem *base =
		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);

	/* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
	 * here at all: Port 2 routing (EHCI or UDC) must be set either
	 * by boot firmware or platform init code; I can't autodetect
	 * a sane setting.
	 */
	__raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
	wmb();
	__raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
	wmb();
	__raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
	wmb();
	__raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
	wmb();
	/* set coherent access bit */
	__raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
	wmb();
}

static inline void __au1200_ohci_control(void __iomem *base, int enable)
{
	unsigned long r = __raw_readl(base + AU1200_USBCFG);
	if (enable) {
		__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
		wmb();
		udelay(2000);
	} else {
		__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
		wmb();
		udelay(1000);
	}
}

static inline void __au1200_ehci_control(void __iomem *base, int enable)
{
	unsigned long r = __raw_readl(base + AU1200_USBCFG);
	if (enable) {
		__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
		wmb();
		udelay(1000);
	} else {
		if (!(r & USBCFG_UCE))		/* UDC also off? */
			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
		__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
		wmb();
		udelay(1000);
	}
}

static inline void __au1200_udc_control(void __iomem *base, int enable)
{
	unsigned long r = __raw_readl(base + AU1200_USBCFG);
	if (enable) {
		__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
		wmb();
	} else {
		if (!(r & USBCFG_ECE))		/* EHCI also off? */
			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
		__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
		wmb();
	}
}

static inline int au1200_usb_control(int block, int enable)
{
	void __iomem *base =
			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);

	switch (block) {
	case ALCHEMY_USB_OHCI0:
		__au1200_ohci_control(base, enable);
		break;
	case ALCHEMY_USB_UDC0:
		__au1200_udc_control(base, enable);
		break;
	case ALCHEMY_USB_EHCI0:
		__au1200_ehci_control(base, enable);
		break;
	default:
		return -ENODEV;
	}
	return 0;
}


/* initialize USB block(s) to a known working state */
static inline void au1200_usb_init(void)
{
	void __iomem *base =
			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
	__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
	wmb();
	udelay(1000);
}

static inline int au1000_usb_init(unsigned long rb, int reg)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
	unsigned long r = __raw_readl(base);
	struct clk *c;

	/* 48MHz check. Don't init if no one can provide it */
	c = clk_get(NULL, "usbh_clk");
	if (IS_ERR(c))
		return -ENODEV;
	if (clk_round_rate(c, 48000000) != 48000000) {
		clk_put(c);
		return -ENODEV;
	}
	if (clk_set_rate(c, 48000000)) {
		clk_put(c);
		return -ENODEV;
	}
	clk_put(c);

#if defined(__BIG_ENDIAN)
	r |= USBHEN_BE;
#endif
	r |= USBHEN_C;

	__raw_writel(r, base);
	wmb();
	udelay(1000);

	return 0;
}


static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
	unsigned long r = __raw_readl(base + creg);
	struct clk *c = clk_get(NULL, "usbh_clk");

	if (IS_ERR(c))
		return;

	if (enable) {
		if (clk_prepare_enable(c))
			goto out;

		__raw_writel(r | USBHEN_CE, base + creg);
		wmb();
		udelay(1000);
		__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
		wmb();
		udelay(1000);

		/* wait for reset complete (read reg twice: au1500 erratum) */
		while (__raw_readl(base + creg),
			!(__raw_readl(base + creg) & USBHEN_RD))
			udelay(1000);
	} else {
		__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
		wmb();
		clk_disable_unprepare(c);
	}
out:
	clk_put(c);
}

static inline int au1000_usb_control(int block, int enable, unsigned long rb,
				     int creg)
{
	int ret = 0;

	switch (block) {
	case ALCHEMY_USB_OHCI0:
		__au1xx0_ohci_control(enable, rb, creg);
		break;
	default:
		ret = -ENODEV;
	}
	return ret;
}

/*
 * alchemy_usb_control - control Alchemy on-chip USB blocks
 * @block:	USB block to target
 * @enable:	set 1 to enable a block, 0 to disable
 */
int alchemy_usb_control(int block, int enable)
{
	unsigned long flags;
	int ret;

	spin_lock_irqsave(&alchemy_usb_lock, flags);
	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1000:
	case ALCHEMY_CPU_AU1500:
	case ALCHEMY_CPU_AU1100:
		ret = au1000_usb_control(block, enable,
			AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
		break;
	case ALCHEMY_CPU_AU1550:
		ret = au1000_usb_control(block, enable,
			AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
		break;
	case ALCHEMY_CPU_AU1200:
		ret = au1200_usb_control(block, enable);
		break;
	case ALCHEMY_CPU_AU1300:
		ret = au1300_usb_control(block, enable);
		break;
	default:
		ret = -ENODEV;
	}
	spin_unlock_irqrestore(&alchemy_usb_lock, flags);
	return ret;
}
EXPORT_SYMBOL_GPL(alchemy_usb_control);


static unsigned long alchemy_usb_pmdata[2];

static void au1000_usb_pm(unsigned long br, int creg, int susp)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(br);

	if (susp) {
		alchemy_usb_pmdata[0] = __raw_readl(base + creg);
		/* There appears to be some undocumented reset register.... */
		__raw_writel(0, base + 0x04);
		wmb();
		__raw_writel(0, base + creg);
		wmb();
	} else {
		__raw_writel(alchemy_usb_pmdata[0], base + creg);
		wmb();
	}
}

static void au1200_usb_pm(int susp)
{
	void __iomem *base =
			(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
	if (susp) {
		/* save OTG_CAP/MUX registers which indicate port routing */
		/* FIXME: write an OTG driver to do that */
		alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
		alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
	} else {
		/* restore access to all MMIO areas */
		au1200_usb_init();

		/* restore OTG_CAP/MUX registers */
		__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
		__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
		wmb();
	}
}

static void au1300_usb_pm(int susp)
{
	void __iomem *base =
			(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
	/* remember Port2 routing */
	if (susp) {
		alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
	} else {
		au1300_usb_init();
		__raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
		wmb();
	}
}

static void alchemy_usb_pm(int susp)
{
	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1000:
	case ALCHEMY_CPU_AU1500:
	case ALCHEMY_CPU_AU1100:
		au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
		break;
	case ALCHEMY_CPU_AU1550:
		au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
		break;
	case ALCHEMY_CPU_AU1200:
		au1200_usb_pm(susp);
		break;
	case ALCHEMY_CPU_AU1300:
		au1300_usb_pm(susp);
		break;
	}
}

static int alchemy_usb_suspend(void)
{
	alchemy_usb_pm(1);
	return 0;
}

static void alchemy_usb_resume(void)
{
	alchemy_usb_pm(0);
}

static struct syscore_ops alchemy_usb_pm_ops = {
	.suspend	= alchemy_usb_suspend,
	.resume		= alchemy_usb_resume,
};

static int __init alchemy_usb_init(void)
{
	int ret = 0;

	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1000:
	case ALCHEMY_CPU_AU1500:
	case ALCHEMY_CPU_AU1100:
		ret = au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR,
				      AU1000_OHCICFG);
		break;
	case ALCHEMY_CPU_AU1550:
		ret = au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR,
				      AU1550_OHCICFG);
		break;
	case ALCHEMY_CPU_AU1200:
		au1200_usb_init();
		break;
	case ALCHEMY_CPU_AU1300:
		au1300_usb_init();
		break;
	}

	if (!ret)
		register_syscore_ops(&alchemy_usb_pm_ops);

	return ret;
}
arch_initcall(alchemy_usb_init);