Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
// SPDX-License-Identifier: GPL-2.0-only
/****************************************************************************
 * Driver for Solarflare network controllers and boards
 * Copyright 2007-2012 Solarflare Communications Inc.
 */

#include <linux/rtnetlink.h>

#include "net_driver.h"
#include "phy.h"
#include "efx.h"
#include "nic.h"
#include "workarounds.h"

/* Macros for unpacking the board revision */
/* The revision info is in host byte order. */
#define FALCON_BOARD_TYPE(_rev) (_rev >> 8)
#define FALCON_BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
#define FALCON_BOARD_MINOR(_rev) (_rev & 0xf)

/* Board types */
#define FALCON_BOARD_SFE4001 0x01
#define FALCON_BOARD_SFE4002 0x02
#define FALCON_BOARD_SFE4003 0x03
#define FALCON_BOARD_SFN4112F 0x52

/* Board temperature is about 15°C above ambient when air flow is
 * limited.  The maximum acceptable ambient temperature varies
 * depending on the PHY specifications but the critical temperature
 * above which we should shut down to avoid damage is 80°C. */
#define FALCON_BOARD_TEMP_BIAS	15
#define FALCON_BOARD_TEMP_CRIT	(80 + FALCON_BOARD_TEMP_BIAS)

/* SFC4000 datasheet says: 'The maximum permitted junction temperature
 * is 125°C; the thermal design of the environment for the SFC4000
 * should aim to keep this well below 100°C.' */
#define FALCON_JUNC_TEMP_MIN	0
#define FALCON_JUNC_TEMP_MAX	90
#define FALCON_JUNC_TEMP_CRIT	125

/*****************************************************************************
 * Support for LM87 sensor chip used on several boards
 */
#define LM87_REG_TEMP_HW_INT_LOCK	0x13
#define LM87_REG_TEMP_HW_EXT_LOCK	0x14
#define LM87_REG_TEMP_HW_INT		0x17
#define LM87_REG_TEMP_HW_EXT		0x18
#define LM87_REG_TEMP_EXT1		0x26
#define LM87_REG_TEMP_INT		0x27
#define LM87_REG_ALARMS1		0x41
#define LM87_REG_ALARMS2		0x42
#define LM87_IN_LIMITS(nr, _min, _max)			\
	0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
#define LM87_AIN_LIMITS(nr, _min, _max)			\
	0x3B + (nr), _max, 0x1A + (nr), _min
#define LM87_TEMP_INT_LIMITS(_min, _max)		\
	0x39, _max, 0x3A, _min
#define LM87_TEMP_EXT1_LIMITS(_min, _max)		\
	0x37, _max, 0x38, _min

#define LM87_ALARM_TEMP_INT		0x10
#define LM87_ALARM_TEMP_EXT1		0x20

#if IS_ENABLED(CONFIG_SENSORS_LM87)

static int ef4_poke_lm87(struct i2c_client *client, const u8 *reg_values)
{
	while (*reg_values) {
		u8 reg = *reg_values++;
		u8 value = *reg_values++;
		int rc = i2c_smbus_write_byte_data(client, reg, value);
		if (rc)
			return rc;
	}
	return 0;
}

static const u8 falcon_lm87_common_regs[] = {
	LM87_REG_TEMP_HW_INT_LOCK, FALCON_BOARD_TEMP_CRIT,
	LM87_REG_TEMP_HW_INT, FALCON_BOARD_TEMP_CRIT,
	LM87_TEMP_EXT1_LIMITS(FALCON_JUNC_TEMP_MIN, FALCON_JUNC_TEMP_MAX),
	LM87_REG_TEMP_HW_EXT_LOCK, FALCON_JUNC_TEMP_CRIT,
	LM87_REG_TEMP_HW_EXT, FALCON_JUNC_TEMP_CRIT,
	0
};

static int ef4_init_lm87(struct ef4_nic *efx, const struct i2c_board_info *info,
			 const u8 *reg_values)
{
	struct falcon_board *board = falcon_board(efx);
	struct i2c_client *client = i2c_new_client_device(&board->i2c_adap, info);
	int rc;

	if (IS_ERR(client))
		return PTR_ERR(client);

	/* Read-to-clear alarm/interrupt status */
	i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
	i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);

	rc = ef4_poke_lm87(client, reg_values);
	if (rc)
		goto err;
	rc = ef4_poke_lm87(client, falcon_lm87_common_regs);
	if (rc)
		goto err;

	board->hwmon_client = client;
	return 0;

err:
	i2c_unregister_device(client);
	return rc;
}

static void ef4_fini_lm87(struct ef4_nic *efx)
{
	i2c_unregister_device(falcon_board(efx)->hwmon_client);
}

static int ef4_check_lm87(struct ef4_nic *efx, unsigned mask)
{
	struct i2c_client *client = falcon_board(efx)->hwmon_client;
	bool temp_crit, elec_fault, is_failure;
	u16 alarms;
	s32 reg;

	/* If link is up then do not monitor temperature */
	if (EF4_WORKAROUND_7884(efx) && efx->link_state.up)
		return 0;

	reg = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
	if (reg < 0)
		return reg;
	alarms = reg;
	reg = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
	if (reg < 0)
		return reg;
	alarms |= reg << 8;
	alarms &= mask;

	temp_crit = false;
	if (alarms & LM87_ALARM_TEMP_INT) {
		reg = i2c_smbus_read_byte_data(client, LM87_REG_TEMP_INT);
		if (reg < 0)
			return reg;
		if (reg > FALCON_BOARD_TEMP_CRIT)
			temp_crit = true;
	}
	if (alarms & LM87_ALARM_TEMP_EXT1) {
		reg = i2c_smbus_read_byte_data(client, LM87_REG_TEMP_EXT1);
		if (reg < 0)
			return reg;
		if (reg > FALCON_JUNC_TEMP_CRIT)
			temp_crit = true;
	}
	elec_fault = alarms & ~(LM87_ALARM_TEMP_INT | LM87_ALARM_TEMP_EXT1);
	is_failure = temp_crit || elec_fault;

	if (alarms)
		netif_err(efx, hw, efx->net_dev,
			  "LM87 detected a hardware %s (status %02x:%02x)"
			  "%s%s%s%s\n",
			  is_failure ? "failure" : "problem",
			  alarms & 0xff, alarms >> 8,
			  (alarms & LM87_ALARM_TEMP_INT) ?
			  "; board is overheating" : "",
			  (alarms & LM87_ALARM_TEMP_EXT1) ?
			  "; controller is overheating" : "",
			  temp_crit ? "; reached critical temperature" : "",
			  elec_fault ? "; electrical fault" : "");

	return is_failure ? -ERANGE : 0;
}

#else /* !CONFIG_SENSORS_LM87 */

static inline int
ef4_init_lm87(struct ef4_nic *efx, const struct i2c_board_info *info,
	      const u8 *reg_values)
{
	return 0;
}
static inline void ef4_fini_lm87(struct ef4_nic *efx)
{
}
static inline int ef4_check_lm87(struct ef4_nic *efx, unsigned mask)
{
	return 0;
}

#endif /* CONFIG_SENSORS_LM87 */

/*****************************************************************************
 * Support for the SFE4001 NIC.
 *
 * The SFE4001 does not power-up fully at reset due to its high power
 * consumption.  We control its power via a PCA9539 I/O expander.
 * It also has a MAX6647 temperature monitor which we expose to
 * the lm90 driver.
 *
 * This also provides minimal support for reflashing the PHY, which is
 * initiated by resetting it with the FLASH_CFG_1 pin pulled down.
 * On SFE4001 rev A2 and later this is connected to the 3V3X output of
 * the IO-expander.
 * We represent reflash mode as PHY_MODE_SPECIAL and make it mutually
 * exclusive with the network device being open.
 */

/**************************************************************************
 * Support for I2C IO Expander device on SFE4001
 */
#define	PCA9539 0x74

#define	P0_IN 0x00
#define	P0_OUT 0x02
#define	P0_INVERT 0x04
#define	P0_CONFIG 0x06

#define	P0_EN_1V0X_LBN 0
#define	P0_EN_1V0X_WIDTH 1
#define	P0_EN_1V2_LBN 1
#define	P0_EN_1V2_WIDTH 1
#define	P0_EN_2V5_LBN 2
#define	P0_EN_2V5_WIDTH 1
#define	P0_EN_3V3X_LBN 3
#define	P0_EN_3V3X_WIDTH 1
#define	P0_EN_5V_LBN 4
#define	P0_EN_5V_WIDTH 1
#define	P0_SHORTEN_JTAG_LBN 5
#define	P0_SHORTEN_JTAG_WIDTH 1
#define	P0_X_TRST_LBN 6
#define	P0_X_TRST_WIDTH 1
#define	P0_DSP_RESET_LBN 7
#define	P0_DSP_RESET_WIDTH 1

#define	P1_IN 0x01
#define	P1_OUT 0x03
#define	P1_INVERT 0x05
#define	P1_CONFIG 0x07

#define	P1_AFE_PWD_LBN 0
#define	P1_AFE_PWD_WIDTH 1
#define	P1_DSP_PWD25_LBN 1
#define	P1_DSP_PWD25_WIDTH 1
#define	P1_RESERVED_LBN 2
#define	P1_RESERVED_WIDTH 2
#define	P1_SPARE_LBN 4
#define	P1_SPARE_WIDTH 4

/* Temperature Sensor */
#define MAX664X_REG_RSL		0x02
#define MAX664X_REG_WLHO	0x0B

static void sfe4001_poweroff(struct ef4_nic *efx)
{
	struct i2c_client *ioexp_client = falcon_board(efx)->ioexp_client;
	struct i2c_client *hwmon_client = falcon_board(efx)->hwmon_client;

	/* Turn off all power rails and disable outputs */
	i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
	i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
	i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);

	/* Clear any over-temperature alert */
	i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
}

static int sfe4001_poweron(struct ef4_nic *efx)
{
	struct i2c_client *ioexp_client = falcon_board(efx)->ioexp_client;
	struct i2c_client *hwmon_client = falcon_board(efx)->hwmon_client;
	unsigned int i, j;
	int rc;
	u8 out;

	/* Clear any previous over-temperature alert */
	rc = i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
	if (rc < 0)
		return rc;

	/* Enable port 0 and port 1 outputs on IO expander */
	rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
	if (rc)
		return rc;
	rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
				       0xff & ~(1 << P1_SPARE_LBN));
	if (rc)
		goto fail_on;

	/* If PHY power is on, turn it all off and wait 1 second to
	 * ensure a full reset.
	 */
	rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
	if (rc < 0)
		goto fail_on;
	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
		       (0 << P0_EN_1V0X_LBN));
	if (rc != out) {
		netif_info(efx, hw, efx->net_dev, "power-cycling PHY\n");
		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
		if (rc)
			goto fail_on;
		schedule_timeout_uninterruptible(HZ);
	}

	for (i = 0; i < 20; ++i) {
		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
			       (1 << P0_X_TRST_LBN));
		if (efx->phy_mode & PHY_MODE_SPECIAL)
			out |= 1 << P0_EN_3V3X_LBN;

		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
		if (rc)
			goto fail_on;
		msleep(10);

		/* Turn on 1V power rail */
		out &= ~(1 << P0_EN_1V0X_LBN);
		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
		if (rc)
			goto fail_on;

		netif_info(efx, hw, efx->net_dev,
			   "waiting for DSP boot (attempt %d)...\n", i);

		/* In flash config mode, DSP does not turn on AFE, so
		 * just wait 1 second.
		 */
		if (efx->phy_mode & PHY_MODE_SPECIAL) {
			schedule_timeout_uninterruptible(HZ);
			return 0;
		}

		for (j = 0; j < 10; ++j) {
			msleep(100);

			/* Check DSP has asserted AFE power line */
			rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
			if (rc < 0)
				goto fail_on;
			if (rc & (1 << P1_AFE_PWD_LBN))
				return 0;
		}
	}

	netif_info(efx, hw, efx->net_dev, "timed out waiting for DSP boot\n");
	rc = -ETIMEDOUT;
fail_on:
	sfe4001_poweroff(efx);
	return rc;
}

static ssize_t phy_flash_cfg_show(struct device *dev,
				  struct device_attribute *attr, char *buf)
{
	struct ef4_nic *efx = dev_get_drvdata(dev);
	return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
}

static ssize_t phy_flash_cfg_store(struct device *dev,
				   struct device_attribute *attr,
				   const char *buf, size_t count)
{
	struct ef4_nic *efx = dev_get_drvdata(dev);
	enum ef4_phy_mode old_mode, new_mode;
	int err;

	rtnl_lock();
	old_mode = efx->phy_mode;
	if (count == 0 || *buf == '0')
		new_mode = old_mode & ~PHY_MODE_SPECIAL;
	else
		new_mode = PHY_MODE_SPECIAL;
	if (!((old_mode ^ new_mode) & PHY_MODE_SPECIAL)) {
		err = 0;
	} else if (efx->state != STATE_READY || netif_running(efx->net_dev)) {
		err = -EBUSY;
	} else {
		/* Reset the PHY, reconfigure the MAC and enable/disable
		 * MAC stats accordingly. */
		efx->phy_mode = new_mode;
		if (new_mode & PHY_MODE_SPECIAL)
			falcon_stop_nic_stats(efx);
		err = sfe4001_poweron(efx);
		if (!err)
			err = ef4_reconfigure_port(efx);
		if (!(new_mode & PHY_MODE_SPECIAL))
			falcon_start_nic_stats(efx);
	}
	rtnl_unlock();

	return err ? err : count;
}

static DEVICE_ATTR_RW(phy_flash_cfg);

static void sfe4001_fini(struct ef4_nic *efx)
{
	struct falcon_board *board = falcon_board(efx);

	netif_info(efx, drv, efx->net_dev, "%s\n", __func__);

	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
	sfe4001_poweroff(efx);
	i2c_unregister_device(board->ioexp_client);
	i2c_unregister_device(board->hwmon_client);
}

static int sfe4001_check_hw(struct ef4_nic *efx)
{
	struct falcon_nic_data *nic_data = efx->nic_data;
	s32 status;

	/* If XAUI link is up then do not monitor */
	if (EF4_WORKAROUND_7884(efx) && !nic_data->xmac_poll_required)
		return 0;

	/* Check the powered status of the PHY. Lack of power implies that
	 * the MAX6647 has shut down power to it, probably due to a temp.
	 * alarm. Reading the power status rather than the MAX6647 status
	 * directly because the later is read-to-clear and would thus
	 * start to power up the PHY again when polled, causing us to blip
	 * the power undesirably.
	 * We know we can read from the IO expander because we did
	 * it during power-on. Assume failure now is bad news. */
	status = i2c_smbus_read_byte_data(falcon_board(efx)->ioexp_client, P1_IN);
	if (status >= 0 &&
	    (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0)
		return 0;

	/* Use board power control, not PHY power control */
	sfe4001_poweroff(efx);
	efx->phy_mode = PHY_MODE_OFF;

	return (status < 0) ? -EIO : -ERANGE;
}

static const struct i2c_board_info sfe4001_hwmon_info = {
	I2C_BOARD_INFO("max6647", 0x4e),
};

/* This board uses an I2C expander to provider power to the PHY, which needs to
 * be turned on before the PHY can be used.
 * Context: Process context, rtnl lock held
 */
static int sfe4001_init(struct ef4_nic *efx)
{
	struct falcon_board *board = falcon_board(efx);
	int rc;

#if IS_ENABLED(CONFIG_SENSORS_LM90)
	board->hwmon_client =
		i2c_new_client_device(&board->i2c_adap, &sfe4001_hwmon_info);
#else
	board->hwmon_client =
		i2c_new_dummy_device(&board->i2c_adap, sfe4001_hwmon_info.addr);
#endif
	if (IS_ERR(board->hwmon_client))
		return PTR_ERR(board->hwmon_client);

	/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
	rc = i2c_smbus_write_byte_data(board->hwmon_client,
				       MAX664X_REG_WLHO, 90);
	if (rc)
		goto fail_hwmon;

	board->ioexp_client = i2c_new_dummy_device(&board->i2c_adap, PCA9539);
	if (IS_ERR(board->ioexp_client)) {
		rc = PTR_ERR(board->ioexp_client);
		goto fail_hwmon;
	}

	if (efx->phy_mode & PHY_MODE_SPECIAL) {
		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
		 * will fail. */
		falcon_stop_nic_stats(efx);
	}
	rc = sfe4001_poweron(efx);
	if (rc)
		goto fail_ioexp;

	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
	if (rc)
		goto fail_on;

	netif_info(efx, hw, efx->net_dev, "PHY is powered on\n");
	return 0;

fail_on:
	sfe4001_poweroff(efx);
fail_ioexp:
	i2c_unregister_device(board->ioexp_client);
fail_hwmon:
	i2c_unregister_device(board->hwmon_client);
	return rc;
}

/*****************************************************************************
 * Support for the SFE4002
 *
 */
static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */

static const u8 sfe4002_lm87_regs[] = {
	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
	LM87_IN_LIMITS(3, 0xac, 0xd4),		/* 5V:    5.0V +/- 10% */
	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
	LM87_AIN_LIMITS(0, 0x98, 0xbb),		/* AIN1:  1.66V +/- 10% */
	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
	LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS),
	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
	0
};

static const struct i2c_board_info sfe4002_hwmon_info = {
	I2C_BOARD_INFO("lm87", 0x2e),
	.platform_data	= &sfe4002_lm87_channel,
};

/****************************************************************************/
/* LED allocations. Note that on rev A0 boards the schematic and the reality
 * differ: red and green are swapped. Below is the fixed (A1) layout (there
 * are only 3 A0 boards in existence, so no real reason to make this
 * conditional).
 */
#define SFE4002_FAULT_LED (2)	/* Red */
#define SFE4002_RX_LED    (0)	/* Green */
#define SFE4002_TX_LED    (1)	/* Amber */

static void sfe4002_init_phy(struct ef4_nic *efx)
{
	/* Set the TX and RX LEDs to reflect status and activity, and the
	 * fault LED off */
	falcon_qt202x_set_led(efx, SFE4002_TX_LED,
			      QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
	falcon_qt202x_set_led(efx, SFE4002_RX_LED,
			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
	falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
}

static void sfe4002_set_id_led(struct ef4_nic *efx, enum ef4_led_mode mode)
{
	falcon_qt202x_set_led(
		efx, SFE4002_FAULT_LED,
		(mode == EF4_LED_ON) ? QUAKE_LED_ON : QUAKE_LED_OFF);
}

static int sfe4002_check_hw(struct ef4_nic *efx)
{
	struct falcon_board *board = falcon_board(efx);

	/* A0 board rev. 4002s report a temperature fault the whole time
	 * (bad sensor) so we mask it out. */
	unsigned alarm_mask =
		(board->major == 0 && board->minor == 0) ?
		~LM87_ALARM_TEMP_EXT1 : ~0;

	return ef4_check_lm87(efx, alarm_mask);
}

static int sfe4002_init(struct ef4_nic *efx)
{
	return ef4_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
}

/*****************************************************************************
 * Support for the SFN4112F
 *
 */
static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */

static const u8 sfn4112f_lm87_regs[] = {
	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
	LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS),
	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
	0
};

static const struct i2c_board_info sfn4112f_hwmon_info = {
	I2C_BOARD_INFO("lm87", 0x2e),
	.platform_data	= &sfn4112f_lm87_channel,
};

#define SFN4112F_ACT_LED	0
#define SFN4112F_LINK_LED	1

static void sfn4112f_init_phy(struct ef4_nic *efx)
{
	falcon_qt202x_set_led(efx, SFN4112F_ACT_LED,
			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
	falcon_qt202x_set_led(efx, SFN4112F_LINK_LED,
			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
}

static void sfn4112f_set_id_led(struct ef4_nic *efx, enum ef4_led_mode mode)
{
	int reg;

	switch (mode) {
	case EF4_LED_OFF:
		reg = QUAKE_LED_OFF;
		break;
	case EF4_LED_ON:
		reg = QUAKE_LED_ON;
		break;
	default:
		reg = QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT;
		break;
	}

	falcon_qt202x_set_led(efx, SFN4112F_LINK_LED, reg);
}

static int sfn4112f_check_hw(struct ef4_nic *efx)
{
	/* Mask out unused sensors */
	return ef4_check_lm87(efx, ~0x48);
}

static int sfn4112f_init(struct ef4_nic *efx)
{
	return ef4_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
}

/*****************************************************************************
 * Support for the SFE4003
 *
 */
static u8 sfe4003_lm87_channel = 0x03; /* use AIN not FAN inputs */

static const u8 sfe4003_lm87_regs[] = {
	LM87_IN_LIMITS(0, 0x67, 0x7f),		/* 2.5V:  1.5V +/- 10% */
	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
	LM87_TEMP_INT_LIMITS(0, 70 + FALCON_BOARD_TEMP_BIAS),
	0
};

static const struct i2c_board_info sfe4003_hwmon_info = {
	I2C_BOARD_INFO("lm87", 0x2e),
	.platform_data	= &sfe4003_lm87_channel,
};

/* Board-specific LED info. */
#define SFE4003_RED_LED_GPIO	11
#define SFE4003_LED_ON		1
#define SFE4003_LED_OFF		0

static void sfe4003_set_id_led(struct ef4_nic *efx, enum ef4_led_mode mode)
{
	struct falcon_board *board = falcon_board(efx);

	/* The LEDs were not wired to GPIOs before A3 */
	if (board->minor < 3 && board->major == 0)
		return;

	falcon_txc_set_gpio_val(
		efx, SFE4003_RED_LED_GPIO,
		(mode == EF4_LED_ON) ? SFE4003_LED_ON : SFE4003_LED_OFF);
}

static void sfe4003_init_phy(struct ef4_nic *efx)
{
	struct falcon_board *board = falcon_board(efx);

	/* The LEDs were not wired to GPIOs before A3 */
	if (board->minor < 3 && board->major == 0)
		return;

	falcon_txc_set_gpio_dir(efx, SFE4003_RED_LED_GPIO, TXC_GPIO_DIR_OUTPUT);
	falcon_txc_set_gpio_val(efx, SFE4003_RED_LED_GPIO, SFE4003_LED_OFF);
}

static int sfe4003_check_hw(struct ef4_nic *efx)
{
	struct falcon_board *board = falcon_board(efx);

	/* A0/A1/A2 board rev. 4003s  report a temperature fault the whole time
	 * (bad sensor) so we mask it out. */
	unsigned alarm_mask =
		(board->major == 0 && board->minor <= 2) ?
		~LM87_ALARM_TEMP_EXT1 : ~0;

	return ef4_check_lm87(efx, alarm_mask);
}

static int sfe4003_init(struct ef4_nic *efx)
{
	return ef4_init_lm87(efx, &sfe4003_hwmon_info, sfe4003_lm87_regs);
}

static const struct falcon_board_type board_types[] = {
	{
		.id		= FALCON_BOARD_SFE4001,
		.init		= sfe4001_init,
		.init_phy	= ef4_port_dummy_op_void,
		.fini		= sfe4001_fini,
		.set_id_led	= tenxpress_set_id_led,
		.monitor	= sfe4001_check_hw,
	},
	{
		.id		= FALCON_BOARD_SFE4002,
		.init		= sfe4002_init,
		.init_phy	= sfe4002_init_phy,
		.fini		= ef4_fini_lm87,
		.set_id_led	= sfe4002_set_id_led,
		.monitor	= sfe4002_check_hw,
	},
	{
		.id		= FALCON_BOARD_SFE4003,
		.init		= sfe4003_init,
		.init_phy	= sfe4003_init_phy,
		.fini		= ef4_fini_lm87,
		.set_id_led	= sfe4003_set_id_led,
		.monitor	= sfe4003_check_hw,
	},
	{
		.id		= FALCON_BOARD_SFN4112F,
		.init		= sfn4112f_init,
		.init_phy	= sfn4112f_init_phy,
		.fini		= ef4_fini_lm87,
		.set_id_led	= sfn4112f_set_id_led,
		.monitor	= sfn4112f_check_hw,
	},
};

int falcon_probe_board(struct ef4_nic *efx, u16 revision_info)
{
	struct falcon_board *board = falcon_board(efx);
	u8 type_id = FALCON_BOARD_TYPE(revision_info);
	int i;

	board->major = FALCON_BOARD_MAJOR(revision_info);
	board->minor = FALCON_BOARD_MINOR(revision_info);

	for (i = 0; i < ARRAY_SIZE(board_types); i++)
		if (board_types[i].id == type_id)
			board->type = &board_types[i];

	if (board->type) {
		return 0;
	} else {
		netif_err(efx, probe, efx->net_dev, "unknown board type %d\n",
			  type_id);
		return -ENODEV;
	}
}