Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 | // SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2020 ROHM Semiconductors
// ROHM BD9576MUF/BD9573MUF regulator driver
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/rohm-bd957x.h>
#include <linux/mfd/rohm-generic.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
#define BD957X_VOUTS1_VOLT 3300000
#define BD957X_VOUTS4_BASE_VOLT 1030000
#define BD957X_VOUTS34_NUM_VOLT 32
static int vout1_volt_table[] = {5000000, 4900000, 4800000, 4700000, 4600000,
4500000, 4500000, 4500000, 5000000, 5100000,
5200000, 5300000, 5400000, 5500000, 5500000,
5500000};
static int vout2_volt_table[] = {1800000, 1780000, 1760000, 1740000, 1720000,
1700000, 1680000, 1660000, 1800000, 1820000,
1840000, 1860000, 1880000, 1900000, 1920000,
1940000};
static int voutl1_volt_table[] = {2500000, 2540000, 2580000, 2620000, 2660000,
2700000, 2740000, 2780000, 2500000, 2460000,
2420000, 2380000, 2340000, 2300000, 2260000,
2220000};
struct bd957x_regulator_data {
struct regulator_desc desc;
int base_voltage;
};
static int bd957x_vout34_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
const struct regulator_desc *desc = rdev->desc;
int multiplier = selector & desc->vsel_mask & 0x7f;
int tune;
/* VOUT3 and 4 has 10mV step */
tune = multiplier * 10000;
if (!(selector & 0x80))
return desc->fixed_uV - tune;
return desc->fixed_uV + tune;
}
static int bd957x_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
const struct regulator_desc *desc = rdev->desc;
int index = selector & desc->vsel_mask & 0x7f;
if (!(selector & 0x80))
index += desc->n_voltages/2;
if (index >= desc->n_voltages)
return -EINVAL;
return desc->volt_table[index];
}
static const struct regulator_ops bd957x_vout34_ops = {
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = bd957x_vout34_list_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static const struct regulator_ops bd957X_vouts1_regulator_ops = {
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_ops bd957x_ops = {
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = bd957x_list_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static struct bd957x_regulator_data bd9576_regulators[] = {
{
.desc = {
.name = "VD50",
.of_match = of_match_ptr("regulator-vd50"),
.regulators_node = of_match_ptr("regulators"),
.id = BD957X_VD50,
.type = REGULATOR_VOLTAGE,
.ops = &bd957x_ops,
.volt_table = &vout1_volt_table[0],
.n_voltages = ARRAY_SIZE(vout1_volt_table),
.vsel_reg = BD957X_REG_VOUT1_TUNE,
.vsel_mask = BD957X_MASK_VOUT1_TUNE,
.enable_reg = BD957X_REG_POW_TRIGGER1,
.enable_mask = BD957X_REGULATOR_EN_MASK,
.enable_val = BD957X_REGULATOR_DIS_VAL,
.enable_is_inverted = true,
.owner = THIS_MODULE,
},
},
{
.desc = {
.name = "VD18",
.of_match = of_match_ptr("regulator-vd18"),
.regulators_node = of_match_ptr("regulators"),
.id = BD957X_VD18,
.type = REGULATOR_VOLTAGE,
.ops = &bd957x_ops,
.volt_table = &vout2_volt_table[0],
.n_voltages = ARRAY_SIZE(vout2_volt_table),
.vsel_reg = BD957X_REG_VOUT2_TUNE,
.vsel_mask = BD957X_MASK_VOUT2_TUNE,
.enable_reg = BD957X_REG_POW_TRIGGER2,
.enable_mask = BD957X_REGULATOR_EN_MASK,
.enable_val = BD957X_REGULATOR_DIS_VAL,
.enable_is_inverted = true,
.owner = THIS_MODULE,
},
},
{
.desc = {
.name = "VDDDR",
.of_match = of_match_ptr("regulator-vdddr"),
.regulators_node = of_match_ptr("regulators"),
.id = BD957X_VDDDR,
.ops = &bd957x_vout34_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD957X_VOUTS34_NUM_VOLT,
.vsel_reg = BD957X_REG_VOUT3_TUNE,
.vsel_mask = BD957X_MASK_VOUT3_TUNE,
.enable_reg = BD957X_REG_POW_TRIGGER3,
.enable_mask = BD957X_REGULATOR_EN_MASK,
.enable_val = BD957X_REGULATOR_DIS_VAL,
.enable_is_inverted = true,
.owner = THIS_MODULE,
},
},
{
.desc = {
.name = "VD10",
.of_match = of_match_ptr("regulator-vd10"),
.regulators_node = of_match_ptr("regulators"),
.id = BD957X_VD10,
.ops = &bd957x_vout34_ops,
.type = REGULATOR_VOLTAGE,
.fixed_uV = BD957X_VOUTS4_BASE_VOLT,
.n_voltages = BD957X_VOUTS34_NUM_VOLT,
.vsel_reg = BD957X_REG_VOUT4_TUNE,
.vsel_mask = BD957X_MASK_VOUT4_TUNE,
.enable_reg = BD957X_REG_POW_TRIGGER4,
.enable_mask = BD957X_REGULATOR_EN_MASK,
.enable_val = BD957X_REGULATOR_DIS_VAL,
.enable_is_inverted = true,
.owner = THIS_MODULE,
},
},
{
.desc = {
.name = "VOUTL1",
.of_match = of_match_ptr("regulator-voutl1"),
.regulators_node = of_match_ptr("regulators"),
.id = BD957X_VOUTL1,
.ops = &bd957x_ops,
.type = REGULATOR_VOLTAGE,
.volt_table = &voutl1_volt_table[0],
.n_voltages = ARRAY_SIZE(voutl1_volt_table),
.vsel_reg = BD957X_REG_VOUTL1_TUNE,
.vsel_mask = BD957X_MASK_VOUTL1_TUNE,
.enable_reg = BD957X_REG_POW_TRIGGERL1,
.enable_mask = BD957X_REGULATOR_EN_MASK,
.enable_val = BD957X_REGULATOR_DIS_VAL,
.enable_is_inverted = true,
.owner = THIS_MODULE,
},
},
{
.desc = {
.name = "VOUTS1",
.of_match = of_match_ptr("regulator-vouts1"),
.regulators_node = of_match_ptr("regulators"),
.id = BD957X_VOUTS1,
.ops = &bd957X_vouts1_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = BD957X_VOUTS1_VOLT,
.enable_reg = BD957X_REG_POW_TRIGGERS1,
.enable_mask = BD957X_REGULATOR_EN_MASK,
.enable_val = BD957X_REGULATOR_DIS_VAL,
.enable_is_inverted = true,
.owner = THIS_MODULE,
},
},
};
static int bd957x_probe(struct platform_device *pdev)
{
struct regmap *regmap;
struct regulator_config config = { 0 };
int i;
bool vout_mode, ddr_sel;
const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0];
unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators);
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!regmap) {
dev_err(&pdev->dev, "No regmap\n");
return -EINVAL;
}
vout_mode = of_property_read_bool(pdev->dev.parent->of_node,
"rohm,vout1-en-low");
if (vout_mode) {
struct gpio_desc *en;
dev_dbg(&pdev->dev, "GPIO controlled mode\n");
/* VOUT1 enable state judged by VOUT1_EN pin */
/* See if we have GPIO defined */
en = devm_gpiod_get_from_of_node(&pdev->dev,
pdev->dev.parent->of_node,
"rohm,vout1-en-gpios", 0,
GPIOD_OUT_LOW, "vout1-en");
if (!IS_ERR(en)) {
/* VOUT1_OPS gpio ctrl */
/*
* Regulator core prioritizes the ena_gpio over
* enable/disable/is_enabled callbacks so no need to
* clear them. We can still use same ops
*/
config.ena_gpiod = en;
} else {
/*
* In theory it is possible someone wants to set
* vout1-en LOW during OTP loading and set VOUT1 to be
* controlled by GPIO - but control the GPIO from some
* where else than this driver. For that to work we
* should unset the is_enabled callback here.
*
* I believe such case where rohm,vout1-en-low is set
* and vout1-en-gpios is not is likely to be a
* misconfiguration. So let's just err out for now.
*/
dev_err(&pdev->dev,
"Failed to get VOUT1 control GPIO\n");
return PTR_ERR(en);
}
}
/*
* If more than one PMIC needs to be controlled by same processor then
* allocate the regulator data array here and use bd9576_regulators as
* template. At the moment I see no such use-case so I spare some
* bytes and use bd9576_regulators directly for non-constant configs
* like DDR voltage selection.
*/
ddr_sel = of_property_read_bool(pdev->dev.parent->of_node,
"rohm,ddr-sel-low");
if (ddr_sel)
bd9576_regulators[2].desc.fixed_uV = 1350000;
else
bd9576_regulators[2].desc.fixed_uV = 1500000;
switch (chip) {
case ROHM_CHIP_TYPE_BD9576:
dev_dbg(&pdev->dev, "Found BD9576MUF\n");
break;
case ROHM_CHIP_TYPE_BD9573:
dev_dbg(&pdev->dev, "Found BD9573MUF\n");
break;
default:
dev_err(&pdev->dev, "Unsupported chip type\n");
return -EINVAL;
}
config.dev = pdev->dev.parent;
config.regmap = regmap;
for (i = 0; i < num_reg_data; i++) {
const struct regulator_desc *desc;
struct regulator_dev *rdev;
const struct bd957x_regulator_data *r;
r = ®_data[i];
desc = &r->desc;
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev,
"failed to register %s regulator\n",
desc->name);
return PTR_ERR(rdev);
}
/*
* Clear the VOUT1 GPIO setting - rest of the regulators do not
* support GPIO control
*/
config.ena_gpiod = NULL;
}
return 0;
}
static const struct platform_device_id bd957x_pmic_id[] = {
{ "bd9573-pmic", ROHM_CHIP_TYPE_BD9573 },
{ "bd9576-pmic", ROHM_CHIP_TYPE_BD9576 },
{ },
};
MODULE_DEVICE_TABLE(platform, bd957x_pmic_id);
static struct platform_driver bd957x_regulator = {
.driver = {
.name = "bd957x-pmic",
},
.probe = bd957x_probe,
.id_table = bd957x_pmic_id,
};
module_platform_driver(bd957x_regulator);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("ROHM BD9576/BD9573 voltage regulator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:bd957x-pmic");
|