Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 | /*
* adl_pci6208.c
* Comedi driver for ADLink 6208 series cards
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Driver: adl_pci6208
* Description: ADLink PCI-6208/6216 Series Multi-channel Analog Output Cards
* Devices: [ADLink] PCI-6208 (adl_pci6208), PCI-6216
* Author: nsyeow <nsyeow@pd.jaring.my>
* Updated: Wed, 11 Feb 2015 11:37:18 +0000
* Status: untested
*
* Configuration Options: not applicable, uses PCI auto config
*
* All supported devices share the same PCI device ID and are treated as a
* PCI-6216 with 16 analog output channels. On a PCI-6208, the upper 8
* channels exist in registers, but don't go to DAC chips.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include "../comedi_pci.h"
/*
* PCI-6208/6216-GL register map
*/
#define PCI6208_AO_CONTROL(x) (0x00 + (2 * (x)))
#define PCI6208_AO_STATUS 0x00
#define PCI6208_AO_STATUS_DATA_SEND BIT(0)
#define PCI6208_DIO 0x40
#define PCI6208_DIO_DO_MASK (0x0f)
#define PCI6208_DIO_DO_SHIFT (0)
#define PCI6208_DIO_DI_MASK (0xf0)
#define PCI6208_DIO_DI_SHIFT (4)
static int pci6208_ao_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned int status;
status = inw(dev->iobase + PCI6208_AO_STATUS);
if ((status & PCI6208_AO_STATUS_DATA_SEND) == 0)
return 0;
return -EBUSY;
}
static int pci6208_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int val = s->readback[chan];
int ret;
int i;
for (i = 0; i < insn->n; i++) {
val = data[i];
/* D/A transfer rate is 2.2us */
ret = comedi_timeout(dev, s, insn, pci6208_ao_eoc, 0);
if (ret)
return ret;
/* the hardware expects two's complement values */
outw(comedi_offset_munge(s, val),
dev->iobase + PCI6208_AO_CONTROL(chan));
s->readback[chan] = val;
}
return insn->n;
}
static int pci6208_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int val;
val = inw(dev->iobase + PCI6208_DIO);
val = (val & PCI6208_DIO_DI_MASK) >> PCI6208_DIO_DI_SHIFT;
data[1] = val;
return insn->n;
}
static int pci6208_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
if (comedi_dio_update_state(s, data))
outw(s->state, dev->iobase + PCI6208_DIO);
data[1] = s->state;
return insn->n;
}
static int pci6208_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
unsigned int val;
int ret;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
s = &dev->subdevices[0];
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 16; /* Only 8 usable on PCI-6208 */
s->maxdata = 0xffff;
s->range_table = &range_bipolar10;
s->insn_write = pci6208_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
s = &dev->subdevices[1];
/* digital input subdevice */
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pci6208_di_insn_bits;
s = &dev->subdevices[2];
/* digital output subdevice */
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pci6208_do_insn_bits;
/*
* Get the read back signals from the digital outputs
* and save it as the initial state for the subdevice.
*/
val = inw(dev->iobase + PCI6208_DIO);
val = (val & PCI6208_DIO_DO_MASK) >> PCI6208_DIO_DO_SHIFT;
s->state = val;
return 0;
}
static struct comedi_driver adl_pci6208_driver = {
.driver_name = "adl_pci6208",
.module = THIS_MODULE,
.auto_attach = pci6208_auto_attach,
.detach = comedi_pci_detach,
};
static int adl_pci6208_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &adl_pci6208_driver,
id->driver_data);
}
static const struct pci_device_id adl_pci6208_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
0x9999, 0x6208) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, adl_pci6208_pci_table);
static struct pci_driver adl_pci6208_pci_driver = {
.name = "adl_pci6208",
.id_table = adl_pci6208_pci_table,
.probe = adl_pci6208_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(adl_pci6208_driver, adl_pci6208_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi driver for ADLink 6208 series cards");
MODULE_LICENSE("GPL");
|