Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
// SPDX-License-Identifier: GPL-2.0+
/*
 * Driver for Cadence MIPI-CSI2 TX Controller
 *
 * Copyright (C) 2017-2018 Cadence Design Systems Inc.
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/slab.h>

#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>

#define CSI2TX_DEVICE_CONFIG_REG	0x00
#define CSI2TX_DEVICE_CONFIG_STREAMS_MASK	GENMASK(6, 4)
#define CSI2TX_DEVICE_CONFIG_HAS_DPHY		BIT(3)
#define CSI2TX_DEVICE_CONFIG_LANES_MASK		GENMASK(2, 0)

#define CSI2TX_CONFIG_REG		0x20
#define CSI2TX_CONFIG_CFG_REQ			BIT(2)
#define CSI2TX_CONFIG_SRST_REQ			BIT(1)

#define CSI2TX_DPHY_CFG_REG		0x28
#define CSI2TX_DPHY_CFG_CLK_RESET		BIT(16)
#define CSI2TX_DPHY_CFG_LANE_RESET(n)		BIT((n) + 12)
#define CSI2TX_DPHY_CFG_MODE_MASK		GENMASK(9, 8)
#define CSI2TX_DPHY_CFG_MODE_LPDT		(2 << 8)
#define CSI2TX_DPHY_CFG_MODE_HS			(1 << 8)
#define CSI2TX_DPHY_CFG_MODE_ULPS		(0 << 8)
#define CSI2TX_DPHY_CFG_CLK_ENABLE		BIT(4)
#define CSI2TX_DPHY_CFG_LANE_ENABLE(n)		BIT(n)

#define CSI2TX_DPHY_CLK_WAKEUP_REG	0x2c
#define CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(n)	((n) & 0xffff)

#define CSI2TX_DT_CFG_REG(n)		(0x80 + (n) * 8)
#define CSI2TX_DT_CFG_DT(n)			(((n) & 0x3f) << 2)

#define CSI2TX_DT_FORMAT_REG(n)		(0x84 + (n) * 8)
#define CSI2TX_DT_FORMAT_BYTES_PER_LINE(n)	(((n) & 0xffff) << 16)
#define CSI2TX_DT_FORMAT_MAX_LINE_NUM(n)	((n) & 0xffff)

#define CSI2TX_STREAM_IF_CFG_REG(n)	(0x100 + (n) * 4)
#define CSI2TX_STREAM_IF_CFG_FILL_LEVEL(n)	((n) & 0x1f)

#define CSI2TX_LANES_MAX	4
#define CSI2TX_STREAMS_MAX	4

enum csi2tx_pads {
	CSI2TX_PAD_SOURCE,
	CSI2TX_PAD_SINK_STREAM0,
	CSI2TX_PAD_SINK_STREAM1,
	CSI2TX_PAD_SINK_STREAM2,
	CSI2TX_PAD_SINK_STREAM3,
	CSI2TX_PAD_MAX,
};

struct csi2tx_fmt {
	u32	mbus;
	u32	dt;
	u32	bpp;
};

struct csi2tx_priv {
	struct device			*dev;
	unsigned int			count;

	/*
	 * Used to prevent race conditions between multiple,
	 * concurrent calls to start and stop.
	 */
	struct mutex			lock;

	void __iomem			*base;

	struct clk			*esc_clk;
	struct clk			*p_clk;
	struct clk			*pixel_clk[CSI2TX_STREAMS_MAX];

	struct v4l2_subdev		subdev;
	struct media_pad		pads[CSI2TX_PAD_MAX];
	struct v4l2_mbus_framefmt	pad_fmts[CSI2TX_PAD_MAX];

	bool				has_internal_dphy;
	u8				lanes[CSI2TX_LANES_MAX];
	unsigned int			num_lanes;
	unsigned int			max_lanes;
	unsigned int			max_streams;
};

static const struct csi2tx_fmt csi2tx_formats[] = {
	{
		.mbus	= MEDIA_BUS_FMT_UYVY8_1X16,
		.bpp	= 2,
		.dt	= 0x1e,
	},
	{
		.mbus	= MEDIA_BUS_FMT_RGB888_1X24,
		.bpp	= 3,
		.dt	= 0x24,
	},
};

static const struct v4l2_mbus_framefmt fmt_default = {
	.width		= 1280,
	.height		= 720,
	.code		= MEDIA_BUS_FMT_RGB888_1X24,
	.field		= V4L2_FIELD_NONE,
	.colorspace	= V4L2_COLORSPACE_DEFAULT,
};

static inline
struct csi2tx_priv *v4l2_subdev_to_csi2tx(struct v4l2_subdev *subdev)
{
	return container_of(subdev, struct csi2tx_priv, subdev);
}

static const struct csi2tx_fmt *csi2tx_get_fmt_from_mbus(u32 mbus)
{
	unsigned int i;

	for (i = 0; i < ARRAY_SIZE(csi2tx_formats); i++)
		if (csi2tx_formats[i].mbus == mbus)
			return &csi2tx_formats[i];

	return NULL;
}

static int csi2tx_enum_mbus_code(struct v4l2_subdev *subdev,
				 struct v4l2_subdev_pad_config *cfg,
				 struct v4l2_subdev_mbus_code_enum *code)
{
	if (code->pad || code->index >= ARRAY_SIZE(csi2tx_formats))
		return -EINVAL;

	code->code = csi2tx_formats[code->index].mbus;

	return 0;
}

static struct v4l2_mbus_framefmt *
__csi2tx_get_pad_format(struct v4l2_subdev *subdev,
			struct v4l2_subdev_pad_config *cfg,
			struct v4l2_subdev_format *fmt)
{
	struct csi2tx_priv *csi2tx = v4l2_subdev_to_csi2tx(subdev);

	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
		return v4l2_subdev_get_try_format(subdev, cfg,
						  fmt->pad);

	return &csi2tx->pad_fmts[fmt->pad];
}

static int csi2tx_get_pad_format(struct v4l2_subdev *subdev,
				 struct v4l2_subdev_pad_config *cfg,
				 struct v4l2_subdev_format *fmt)
{
	const struct v4l2_mbus_framefmt *format;

	/* Multiplexed pad? */
	if (fmt->pad == CSI2TX_PAD_SOURCE)
		return -EINVAL;

	format = __csi2tx_get_pad_format(subdev, cfg, fmt);
	if (!format)
		return -EINVAL;

	fmt->format = *format;

	return 0;
}

static int csi2tx_set_pad_format(struct v4l2_subdev *subdev,
				 struct v4l2_subdev_pad_config *cfg,
				 struct v4l2_subdev_format *fmt)
{
	const struct v4l2_mbus_framefmt *src_format = &fmt->format;
	struct v4l2_mbus_framefmt *dst_format;

	/* Multiplexed pad? */
	if (fmt->pad == CSI2TX_PAD_SOURCE)
		return -EINVAL;

	if (!csi2tx_get_fmt_from_mbus(fmt->format.code))
		src_format = &fmt_default;

	dst_format = __csi2tx_get_pad_format(subdev, cfg, fmt);
	if (!dst_format)
		return -EINVAL;

	*dst_format = *src_format;

	return 0;
}

static const struct v4l2_subdev_pad_ops csi2tx_pad_ops = {
	.enum_mbus_code	= csi2tx_enum_mbus_code,
	.get_fmt	= csi2tx_get_pad_format,
	.set_fmt	= csi2tx_set_pad_format,
};

static void csi2tx_reset(struct csi2tx_priv *csi2tx)
{
	writel(CSI2TX_CONFIG_SRST_REQ, csi2tx->base + CSI2TX_CONFIG_REG);

	udelay(10);
}

static int csi2tx_start(struct csi2tx_priv *csi2tx)
{
	struct media_entity *entity = &csi2tx->subdev.entity;
	struct media_link *link;
	unsigned int i;
	u32 reg;

	csi2tx_reset(csi2tx);

	writel(CSI2TX_CONFIG_CFG_REQ, csi2tx->base + CSI2TX_CONFIG_REG);

	udelay(10);

	/* Configure our PPI interface with the D-PHY */
	writel(CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(32),
	       csi2tx->base + CSI2TX_DPHY_CLK_WAKEUP_REG);

	/* Put our lanes (clock and data) out of reset */
	reg = CSI2TX_DPHY_CFG_CLK_RESET | CSI2TX_DPHY_CFG_MODE_LPDT;
	for (i = 0; i < csi2tx->num_lanes; i++)
		reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i]);
	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);

	udelay(10);

	/* Enable our (clock and data) lanes */
	reg |= CSI2TX_DPHY_CFG_CLK_ENABLE;
	for (i = 0; i < csi2tx->num_lanes; i++)
		reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i]);
	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);

	udelay(10);

	/* Switch to HS mode */
	reg &= ~CSI2TX_DPHY_CFG_MODE_MASK;
	writel(reg | CSI2TX_DPHY_CFG_MODE_HS,
	       csi2tx->base + CSI2TX_DPHY_CFG_REG);

	udelay(10);

	/*
	 * Create a static mapping between the CSI virtual channels
	 * and the input streams.
	 *
	 * This should be enhanced, but v4l2 lacks the support for
	 * changing that mapping dynamically at the moment.
	 *
	 * We're protected from the userspace setting up links at the
	 * same time by the upper layer having called
	 * media_pipeline_start().
	 */
	list_for_each_entry(link, &entity->links, list) {
		struct v4l2_mbus_framefmt *mfmt;
		const struct csi2tx_fmt *fmt;
		unsigned int stream;
		int pad_idx = -1;

		/* Only consider our enabled input pads */
		for (i = CSI2TX_PAD_SINK_STREAM0; i < CSI2TX_PAD_MAX; i++) {
			struct media_pad *pad = &csi2tx->pads[i];

			if ((pad == link->sink) &&
			    (link->flags & MEDIA_LNK_FL_ENABLED)) {
				pad_idx = i;
				break;
			}
		}

		if (pad_idx < 0)
			continue;

		mfmt = &csi2tx->pad_fmts[pad_idx];
		fmt = csi2tx_get_fmt_from_mbus(mfmt->code);
		if (!fmt)
			continue;

		stream = pad_idx - CSI2TX_PAD_SINK_STREAM0;

		/*
		 * We use the stream ID there, but it's wrong.
		 *
		 * A stream could very well send a data type that is
		 * not equal to its stream ID. We need to find a
		 * proper way to address it.
		 */
		writel(CSI2TX_DT_CFG_DT(fmt->dt),
		       csi2tx->base + CSI2TX_DT_CFG_REG(stream));

		writel(CSI2TX_DT_FORMAT_BYTES_PER_LINE(mfmt->width * fmt->bpp) |
		       CSI2TX_DT_FORMAT_MAX_LINE_NUM(mfmt->height + 1),
		       csi2tx->base + CSI2TX_DT_FORMAT_REG(stream));

		/*
		 * TODO: This needs to be calculated based on the
		 * output CSI2 clock rate.
		 */
		writel(CSI2TX_STREAM_IF_CFG_FILL_LEVEL(4),
		       csi2tx->base + CSI2TX_STREAM_IF_CFG_REG(stream));
	}

	/* Disable the configuration mode */
	writel(0, csi2tx->base + CSI2TX_CONFIG_REG);

	return 0;
}

static void csi2tx_stop(struct csi2tx_priv *csi2tx)
{
	writel(CSI2TX_CONFIG_CFG_REQ | CSI2TX_CONFIG_SRST_REQ,
	       csi2tx->base + CSI2TX_CONFIG_REG);
}

static int csi2tx_s_stream(struct v4l2_subdev *subdev, int enable)
{
	struct csi2tx_priv *csi2tx = v4l2_subdev_to_csi2tx(subdev);
	int ret = 0;

	mutex_lock(&csi2tx->lock);

	if (enable) {
		/*
		 * If we're not the first users, there's no need to
		 * enable the whole controller.
		 */
		if (!csi2tx->count) {
			ret = csi2tx_start(csi2tx);
			if (ret)
				goto out;
		}

		csi2tx->count++;
	} else {
		csi2tx->count--;

		/*
		 * Let the last user turn off the lights.
		 */
		if (!csi2tx->count)
			csi2tx_stop(csi2tx);
	}

out:
	mutex_unlock(&csi2tx->lock);
	return ret;
}

static const struct v4l2_subdev_video_ops csi2tx_video_ops = {
	.s_stream	= csi2tx_s_stream,
};

static const struct v4l2_subdev_ops csi2tx_subdev_ops = {
	.pad		= &csi2tx_pad_ops,
	.video		= &csi2tx_video_ops,
};

static int csi2tx_get_resources(struct csi2tx_priv *csi2tx,
				struct platform_device *pdev)
{
	struct resource *res;
	unsigned int i;
	u32 dev_cfg;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	csi2tx->base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(csi2tx->base))
		return PTR_ERR(csi2tx->base);

	csi2tx->p_clk = devm_clk_get(&pdev->dev, "p_clk");
	if (IS_ERR(csi2tx->p_clk)) {
		dev_err(&pdev->dev, "Couldn't get p_clk\n");
		return PTR_ERR(csi2tx->p_clk);
	}

	csi2tx->esc_clk = devm_clk_get(&pdev->dev, "esc_clk");
	if (IS_ERR(csi2tx->esc_clk)) {
		dev_err(&pdev->dev, "Couldn't get the esc_clk\n");
		return PTR_ERR(csi2tx->esc_clk);
	}

	clk_prepare_enable(csi2tx->p_clk);
	dev_cfg = readl(csi2tx->base + CSI2TX_DEVICE_CONFIG_REG);
	clk_disable_unprepare(csi2tx->p_clk);

	csi2tx->max_lanes = dev_cfg & CSI2TX_DEVICE_CONFIG_LANES_MASK;
	if (csi2tx->max_lanes > CSI2TX_LANES_MAX) {
		dev_err(&pdev->dev, "Invalid number of lanes: %u\n",
			csi2tx->max_lanes);
		return -EINVAL;
	}

	csi2tx->max_streams = (dev_cfg & CSI2TX_DEVICE_CONFIG_STREAMS_MASK) >> 4;
	if (csi2tx->max_streams > CSI2TX_STREAMS_MAX) {
		dev_err(&pdev->dev, "Invalid number of streams: %u\n",
			csi2tx->max_streams);
		return -EINVAL;
	}

	csi2tx->has_internal_dphy = !!(dev_cfg & CSI2TX_DEVICE_CONFIG_HAS_DPHY);

	for (i = 0; i < csi2tx->max_streams; i++) {
		char clk_name[16];

		snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i);
		csi2tx->pixel_clk[i] = devm_clk_get(&pdev->dev, clk_name);
		if (IS_ERR(csi2tx->pixel_clk[i])) {
			dev_err(&pdev->dev, "Couldn't get clock %s\n",
				clk_name);
			return PTR_ERR(csi2tx->pixel_clk[i]);
		}
	}

	return 0;
}

static int csi2tx_check_lanes(struct csi2tx_priv *csi2tx)
{
	struct v4l2_fwnode_endpoint v4l2_ep;
	struct device_node *ep;
	int ret;

	ep = of_graph_get_endpoint_by_regs(csi2tx->dev->of_node, 0, 0);
	if (!ep)
		return -EINVAL;

	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
	if (ret) {
		dev_err(csi2tx->dev, "Could not parse v4l2 endpoint\n");
		goto out;
	}

	if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
		dev_err(csi2tx->dev, "Unsupported media bus type: 0x%x\n",
			v4l2_ep.bus_type);
		ret = -EINVAL;
		goto out;
	}

	csi2tx->num_lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes;
	if (csi2tx->num_lanes > csi2tx->max_lanes) {
		dev_err(csi2tx->dev,
			"Current configuration uses more lanes than supported\n");
		ret = -EINVAL;
		goto out;
	}

	memcpy(csi2tx->lanes, v4l2_ep.bus.mipi_csi2.data_lanes,
	       sizeof(csi2tx->lanes));

out:
	of_node_put(ep);
	return ret;
}

static int csi2tx_probe(struct platform_device *pdev)
{
	struct csi2tx_priv *csi2tx;
	unsigned int i;
	int ret;

	csi2tx = kzalloc(sizeof(*csi2tx), GFP_KERNEL);
	if (!csi2tx)
		return -ENOMEM;
	platform_set_drvdata(pdev, csi2tx);
	mutex_init(&csi2tx->lock);
	csi2tx->dev = &pdev->dev;

	ret = csi2tx_get_resources(csi2tx, pdev);
	if (ret)
		goto err_free_priv;

	v4l2_subdev_init(&csi2tx->subdev, &csi2tx_subdev_ops);
	csi2tx->subdev.owner = THIS_MODULE;
	csi2tx->subdev.dev = &pdev->dev;
	csi2tx->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
	snprintf(csi2tx->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.%s",
		 KBUILD_MODNAME, dev_name(&pdev->dev));

	ret = csi2tx_check_lanes(csi2tx);
	if (ret)
		goto err_free_priv;

	/* Create our media pads */
	csi2tx->subdev.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
	csi2tx->pads[CSI2TX_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
	for (i = CSI2TX_PAD_SINK_STREAM0; i < CSI2TX_PAD_MAX; i++)
		csi2tx->pads[i].flags = MEDIA_PAD_FL_SINK;

	/*
	 * Only the input pads are considered to have a format at the
	 * moment. The CSI link can multiplex various streams with
	 * different formats, and we can't expose this in v4l2 right
	 * now.
	 */
	for (i = CSI2TX_PAD_SINK_STREAM0; i < CSI2TX_PAD_MAX; i++)
		csi2tx->pad_fmts[i] = fmt_default;

	ret = media_entity_pads_init(&csi2tx->subdev.entity, CSI2TX_PAD_MAX,
				     csi2tx->pads);
	if (ret)
		goto err_free_priv;

	ret = v4l2_async_register_subdev(&csi2tx->subdev);
	if (ret < 0)
		goto err_free_priv;

	dev_info(&pdev->dev,
		 "Probed CSI2TX with %u/%u lanes, %u streams, %s D-PHY\n",
		 csi2tx->num_lanes, csi2tx->max_lanes, csi2tx->max_streams,
		 csi2tx->has_internal_dphy ? "internal" : "no");

	return 0;

err_free_priv:
	kfree(csi2tx);
	return ret;
}

static int csi2tx_remove(struct platform_device *pdev)
{
	struct csi2tx_priv *csi2tx = platform_get_drvdata(pdev);

	v4l2_async_unregister_subdev(&csi2tx->subdev);
	kfree(csi2tx);

	return 0;
}

static const struct of_device_id csi2tx_of_table[] = {
	{ .compatible = "cdns,csi2tx" },
	{ },
};
MODULE_DEVICE_TABLE(of, csi2tx_of_table);

static struct platform_driver csi2tx_driver = {
	.probe	= csi2tx_probe,
	.remove	= csi2tx_remove,

	.driver	= {
		.name		= "cdns-csi2tx",
		.of_match_table	= csi2tx_of_table,
	},
};
module_platform_driver(csi2tx_driver);
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@bootlin.com>");
MODULE_DESCRIPTION("Cadence CSI2-TX controller");
MODULE_LICENSE("GPL");