Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 | // SPDX-License-Identifier: GPL-2.0+
/*
* pcmad.c
* Hardware driver for Winsystems PCM-A/D12 and PCM-A/D16
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000,2001 David A. Schleef <ds@schleef.org>
*/
/*
* Driver: pcmad
* Description: Winsystems PCM-A/D12, PCM-A/D16
* Devices: [Winsystems] PCM-A/D12 (pcmad12), PCM-A/D16 (pcmad16)
* Author: ds
* Status: untested
*
* This driver was written on a bet that I couldn't write a driver
* in less than 2 hours. I won the bet, but never got paid. =(
*
* Configuration options:
* [0] - I/O port base
* [1] - IRQ (unused)
* [2] - Analog input reference (must match jumpers)
* 0 = single-ended (16 channels)
* 1 = differential (8 channels)
* [3] - Analog input encoding (must match jumpers)
* 0 = straight binary (0-5V input range)
* 1 = two's complement (+-10V input range)
*/
#include <linux/module.h>
#include "../comedidev.h"
#define PCMAD_STATUS 0
#define PCMAD_LSB 1
#define PCMAD_MSB 2
#define PCMAD_CONVERT 1
struct pcmad_board_struct {
const char *name;
unsigned int ai_maxdata;
};
static const struct pcmad_board_struct pcmad_boards[] = {
{
.name = "pcmad12",
.ai_maxdata = 0x0fff,
}, {
.name = "pcmad16",
.ai_maxdata = 0xffff,
},
};
static int pcmad_ai_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned int status;
status = inb(dev->iobase + PCMAD_STATUS);
if ((status & 0x3) == 0x3)
return 0;
return -EBUSY;
}
static int pcmad_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int range = CR_RANGE(insn->chanspec);
unsigned int val;
int ret;
int i;
for (i = 0; i < insn->n; i++) {
outb(chan, dev->iobase + PCMAD_CONVERT);
ret = comedi_timeout(dev, s, insn, pcmad_ai_eoc, 0);
if (ret)
return ret;
val = inb(dev->iobase + PCMAD_LSB) |
(inb(dev->iobase + PCMAD_MSB) << 8);
/* data is shifted on the pcmad12, fix it */
if (s->maxdata == 0x0fff)
val >>= 4;
if (comedi_range_is_bipolar(s, range)) {
/* munge the two's complement value */
val ^= ((s->maxdata + 1) >> 1);
}
data[i] = val;
}
return insn->n;
}
static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcmad_board_struct *board = dev->board_ptr;
struct comedi_subdevice *s;
int ret;
ret = comedi_request_region(dev, it->options[0], 0x04);
if (ret)
return ret;
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
return ret;
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AI;
if (it->options[1]) {
/* 8 differential channels */
s->subdev_flags = SDF_READABLE | AREF_DIFF;
s->n_chan = 8;
} else {
/* 16 single-ended channels */
s->subdev_flags = SDF_READABLE | AREF_GROUND;
s->n_chan = 16;
}
s->len_chanlist = 1;
s->maxdata = board->ai_maxdata;
s->range_table = it->options[2] ? &range_bipolar10 : &range_unipolar5;
s->insn_read = pcmad_ai_insn_read;
return 0;
}
static struct comedi_driver pcmad_driver = {
.driver_name = "pcmad",
.module = THIS_MODULE,
.attach = pcmad_attach,
.detach = comedi_legacy_detach,
.board_name = &pcmad_boards[0].name,
.num_names = ARRAY_SIZE(pcmad_boards),
.offset = sizeof(pcmad_boards[0]),
};
module_comedi_driver(pcmad_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
|