Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 | /* SPDX-License-Identifier: GPL-2.0 */
/*
* For License see notice in hfc_multi.c
*
* special IO and init functions for the embedded XHFC board
* from Speech Design
*
*/
#include <asm/cpm1.h>
/* Change this to the value used by your board */
#ifndef IMAP_ADDR
#define IMAP_ADDR 0xFFF00000
#endif
static void
#ifdef HFC_REGISTER_DEBUG
HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val,
const char *function, int line)
#else
HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val)
#endif
{
hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
writeb(reg, hc->xhfc_memaddr);
hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
writeb(val, hc->xhfc_memdata);
}
static u_char
#ifdef HFC_REGISTER_DEBUG
HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
#else
HFC_inb_embsd(struct hfc_multi *hc, u_char reg)
#endif
{
hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
writeb(reg, hc->xhfc_memaddr);
hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
return readb(hc->xhfc_memdata);
}
static u_short
#ifdef HFC_REGISTER_DEBUG
HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
#else
HFC_inw_embsd(struct hfc_multi *hc, u_char reg)
#endif
{
hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
writeb(reg, hc->xhfc_memaddr);
hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
return readb(hc->xhfc_memdata);
}
static void
#ifdef HFC_REGISTER_DEBUG
HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line)
#else
HFC_wait_embsd(struct hfc_multi *hc)
#endif
{
hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
writeb(R_STATUS, hc->xhfc_memaddr);
hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
while (readb(hc->xhfc_memdata) & V_BUSY)
cpu_relax();
}
/* write fifo data (EMBSD) */
void
write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
{
hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
*hc->xhfc_memaddr = A_FIFO_DATA0;
hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
while (len) {
*hc->xhfc_memdata = *data;
data++;
len--;
}
}
/* read fifo data (EMBSD) */
void
read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
{
hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
*hc->xhfc_memaddr = A_FIFO_DATA0;
hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
while (len) {
*data = (u_char)(*hc->xhfc_memdata);
data++;
len--;
}
}
static int
setup_embedded(struct hfc_multi *hc, struct hm_map *m)
{
printk(KERN_INFO
"HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
hc->pci_dev = NULL;
if (m->clock2)
test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
hc->leds = m->leds;
hc->ledstate = 0xAFFEAFFE;
hc->opticalsupport = m->opticalsupport;
hc->pci_iobase = 0;
hc->pci_membase = 0;
hc->xhfc_membase = NULL;
hc->xhfc_memaddr = NULL;
hc->xhfc_memdata = NULL;
/* set memory access methods */
if (m->io_mode) /* use mode from card config */
hc->io_mode = m->io_mode;
switch (hc->io_mode) {
case HFC_IO_MODE_EMBSD:
test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip);
hc->slots = 128; /* required */
/* fall through */
hc->HFC_outb = HFC_outb_embsd;
hc->HFC_inb = HFC_inb_embsd;
hc->HFC_inw = HFC_inw_embsd;
hc->HFC_wait = HFC_wait_embsd;
hc->read_fifo = read_fifo_embsd;
hc->write_fifo = write_fifo_embsd;
hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id;
hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase,
XHFC_MEMSIZE);
if (!hc->xhfc_membase) {
printk(KERN_WARNING
"HFC-multi: failed to remap xhfc address space. "
"(internal error)\n");
return -EIO;
}
hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4);
hc->xhfc_memdata = (u_long *)(hc->xhfc_membase);
printk(KERN_INFO
"HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx "
"xhfc_memaddr:%#lx xhfc_memdata:%#lx\n",
(u_long)hc->xhfc_membase, hc->xhfc_origmembase,
(u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata);
break;
default:
printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
return -EIO;
}
/* Prepare the MPC8XX PortA 10 as output (address/data selector) */
hc->immap = (struct immap *)(IMAP_ADDR);
hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0);
hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0);
hc->immap->im_ioport.iop_padir |= PA_XHFC_A0;
/* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */
hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id);
hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk);
hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk);
hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk);
/* At this point the needed config is done */
/* fifos are still not enabled */
return 0;
}
|