Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 | /*
* icp_multi.c
* Comedi driver for Inova ICP_MULTI board
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1997-2002 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Driver: icp_multi
* Description: Inova ICP_MULTI
* Devices: [Inova] ICP_MULTI (icp_multi)
* Author: Anne Smorthit <anne.smorthit@sfwte.ch>
* Status: works
*
* Configuration options: not applicable, uses PCI auto config
*
* The driver works for analog input and output and digital input and
* output. It does not work with interrupts or with the counters. Currently
* no support for DMA.
*
* It has 16 single-ended or 8 differential Analogue Input channels with
* 12-bit resolution. Ranges : 5V, 10V, +/-5V, +/-10V, 0..20mA and 4..20mA.
* Input ranges can be individually programmed for each channel. Voltage or
* current measurement is selected by jumper.
*
* There are 4 x 12-bit Analogue Outputs. Ranges : 5V, 10V, +/-5V, +/-10V
*
* 16 x Digital Inputs, 24V
*
* 8 x Digital Outputs, 24V, 1A
*
* 4 x 16-bit counters - not implemented
*/
#include <linux/module.h>
#include <linux/delay.h>
#include "../comedi_pci.h"
#define ICP_MULTI_ADC_CSR 0x00 /* R/W: ADC command/status register */
#define ICP_MULTI_ADC_CSR_ST BIT(0) /* Start ADC */
#define ICP_MULTI_ADC_CSR_BSY BIT(0) /* ADC busy */
#define ICP_MULTI_ADC_CSR_BI BIT(4) /* Bipolar input range */
#define ICP_MULTI_ADC_CSR_RA BIT(5) /* Input range 0 = 5V, 1 = 10V */
#define ICP_MULTI_ADC_CSR_DI BIT(6) /* Input mode 1 = differential */
#define ICP_MULTI_ADC_CSR_DI_CHAN(x) (((x) & 0x7) << 9)
#define ICP_MULTI_ADC_CSR_SE_CHAN(x) (((x) & 0xf) << 8)
#define ICP_MULTI_AI 2 /* R: Analogue input data */
#define ICP_MULTI_DAC_CSR 0x04 /* R/W: DAC command/status register */
#define ICP_MULTI_DAC_CSR_ST BIT(0) /* Start DAC */
#define ICP_MULTI_DAC_CSR_BSY BIT(0) /* DAC busy */
#define ICP_MULTI_DAC_CSR_BI BIT(4) /* Bipolar output range */
#define ICP_MULTI_DAC_CSR_RA BIT(5) /* Output range 0 = 5V, 1 = 10V */
#define ICP_MULTI_DAC_CSR_CHAN(x) (((x) & 0x3) << 8)
#define ICP_MULTI_AO 6 /* R/W: Analogue output data */
#define ICP_MULTI_DI 8 /* R/W: Digital inputs */
#define ICP_MULTI_DO 0x0A /* R/W: Digital outputs */
#define ICP_MULTI_INT_EN 0x0c /* R/W: Interrupt enable register */
#define ICP_MULTI_INT_STAT 0x0e /* R/W: Interrupt status register */
#define ICP_MULTI_INT_ADC_RDY BIT(0) /* A/D conversion ready interrupt */
#define ICP_MULTI_INT_DAC_RDY BIT(1) /* D/A conversion ready interrupt */
#define ICP_MULTI_INT_DOUT_ERR BIT(2) /* Digital output error interrupt */
#define ICP_MULTI_INT_DIN_STAT BIT(3) /* Digital input status change int. */
#define ICP_MULTI_INT_CIE0 BIT(4) /* Counter 0 overrun interrupt */
#define ICP_MULTI_INT_CIE1 BIT(5) /* Counter 1 overrun interrupt */
#define ICP_MULTI_INT_CIE2 BIT(6) /* Counter 2 overrun interrupt */
#define ICP_MULTI_INT_CIE3 BIT(7) /* Counter 3 overrun interrupt */
#define ICP_MULTI_INT_MASK 0xff /* All interrupts */
#define ICP_MULTI_CNTR0 0x10 /* R/W: Counter 0 */
#define ICP_MULTI_CNTR1 0x12 /* R/W: counter 1 */
#define ICP_MULTI_CNTR2 0x14 /* R/W: Counter 2 */
#define ICP_MULTI_CNTR3 0x16 /* R/W: Counter 3 */
/* analog input and output have the same range options */
static const struct comedi_lrange icp_multi_ranges = {
4, {
UNI_RANGE(5),
UNI_RANGE(10),
BIP_RANGE(5),
BIP_RANGE(10)
}
};
static const char range_codes_analog[] = { 0x00, 0x20, 0x10, 0x30 };
static int icp_multi_ai_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned int status;
status = readw(dev->mmio + ICP_MULTI_ADC_CSR);
if ((status & ICP_MULTI_ADC_CSR_BSY) == 0)
return 0;
return -EBUSY;
}
static int icp_multi_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int range = CR_RANGE(insn->chanspec);
unsigned int aref = CR_AREF(insn->chanspec);
unsigned int adc_csr;
int ret = 0;
int n;
/* Set mode and range data for specified channel */
if (aref == AREF_DIFF) {
adc_csr = ICP_MULTI_ADC_CSR_DI_CHAN(chan) |
ICP_MULTI_ADC_CSR_DI;
} else {
adc_csr = ICP_MULTI_ADC_CSR_SE_CHAN(chan);
}
adc_csr |= range_codes_analog[range];
writew(adc_csr, dev->mmio + ICP_MULTI_ADC_CSR);
for (n = 0; n < insn->n; n++) {
/* Set start ADC bit */
writew(adc_csr | ICP_MULTI_ADC_CSR_ST,
dev->mmio + ICP_MULTI_ADC_CSR);
udelay(1);
/* Wait for conversion to complete, or get fed up waiting */
ret = comedi_timeout(dev, s, insn, icp_multi_ai_eoc, 0);
if (ret)
break;
data[n] = (readw(dev->mmio + ICP_MULTI_AI) >> 4) & 0x0fff;
}
return ret ? ret : n;
}
static int icp_multi_ao_ready(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned int status;
status = readw(dev->mmio + ICP_MULTI_DAC_CSR);
if ((status & ICP_MULTI_DAC_CSR_BSY) == 0)
return 0;
return -EBUSY;
}
static int icp_multi_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int range = CR_RANGE(insn->chanspec);
unsigned int dac_csr;
int i;
/* Select channel and range */
dac_csr = ICP_MULTI_DAC_CSR_CHAN(chan);
dac_csr |= range_codes_analog[range];
writew(dac_csr, dev->mmio + ICP_MULTI_DAC_CSR);
for (i = 0; i < insn->n; i++) {
unsigned int val = data[i];
int ret;
/* Wait for analog output to be ready for new data */
ret = comedi_timeout(dev, s, insn, icp_multi_ao_ready, 0);
if (ret)
return ret;
writew(val, dev->mmio + ICP_MULTI_AO);
/* Set start conversion bit to write data to channel */
writew(dac_csr | ICP_MULTI_DAC_CSR_ST,
dev->mmio + ICP_MULTI_DAC_CSR);
s->readback[chan] = val;
}
return insn->n;
}
static int icp_multi_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
data[1] = readw(dev->mmio + ICP_MULTI_DI);
return insn->n;
}
static int icp_multi_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
if (comedi_dio_update_state(s, data))
writew(s->state, dev->mmio + ICP_MULTI_DO);
data[1] = s->state;
return insn->n;
}
static int icp_multi_reset(struct comedi_device *dev)
{
int i;
/* Disable all interrupts and clear any requests */
writew(0, dev->mmio + ICP_MULTI_INT_EN);
writew(ICP_MULTI_INT_MASK, dev->mmio + ICP_MULTI_INT_STAT);
/* Reset the analog output channels to 0V */
for (i = 0; i < 4; i++) {
unsigned int dac_csr = ICP_MULTI_DAC_CSR_CHAN(i);
/* Select channel and 0..5V range */
writew(dac_csr, dev->mmio + ICP_MULTI_DAC_CSR);
/* Output 0V */
writew(0, dev->mmio + ICP_MULTI_AO);
/* Set start conversion bit to write data to channel */
writew(dac_csr | ICP_MULTI_DAC_CSR_ST,
dev->mmio + ICP_MULTI_DAC_CSR);
udelay(1);
}
/* Digital outputs to 0 */
writew(0, dev->mmio + ICP_MULTI_DO);
return 0;
}
static int icp_multi_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
int ret;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
dev->mmio = pci_ioremap_bar(pcidev, 2);
if (!dev->mmio)
return -ENOMEM;
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
return ret;
icp_multi_reset(dev);
/* Analog Input subdevice */
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_GROUND | SDF_DIFF;
s->n_chan = 16;
s->maxdata = 0x0fff;
s->range_table = &icp_multi_ranges;
s->insn_read = icp_multi_ai_insn_read;
/* Analog Output subdevice */
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 4;
s->maxdata = 0x0fff;
s->range_table = &icp_multi_ranges;
s->insn_write = icp_multi_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* Digital Input subdevice */
s = &dev->subdevices[2];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = 16;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = icp_multi_di_insn_bits;
/* Digital Output subdevice */
s = &dev->subdevices[3];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 8;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = icp_multi_do_insn_bits;
return 0;
}
static struct comedi_driver icp_multi_driver = {
.driver_name = "icp_multi",
.module = THIS_MODULE,
.auto_attach = icp_multi_auto_attach,
.detach = comedi_pci_detach,
};
static int icp_multi_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &icp_multi_driver, id->driver_data);
}
static const struct pci_device_id icp_multi_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ICP, 0x8000) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, icp_multi_pci_table);
static struct pci_driver icp_multi_pci_driver = {
.name = "icp_multi",
.id_table = icp_multi_pci_table,
.probe = icp_multi_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(icp_multi_driver, icp_multi_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi driver for Inova ICP_MULTI board");
MODULE_LICENSE("GPL");
|