Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 | /*
* Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver
* Based on usb3503 driver
*
* Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
* Copyright (c) 2016 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/gpio/consumer.h>
enum usb4604_mode {
USB4604_MODE_UNKNOWN,
USB4604_MODE_HUB,
USB4604_MODE_STANDBY,
};
struct usb4604 {
enum usb4604_mode mode;
struct device *dev;
struct gpio_desc *gpio_reset;
};
static void usb4604_reset(struct usb4604 *hub, int state)
{
gpiod_set_value_cansleep(hub->gpio_reset, state);
/* Wait for i2c logic to come up */
if (state)
msleep(250);
}
static int usb4604_connect(struct usb4604 *hub)
{
struct device *dev = hub->dev;
struct i2c_client *client = to_i2c_client(dev);
int err;
u8 connect_cmd[] = { 0xaa, 0x55, 0x00 };
usb4604_reset(hub, 1);
err = i2c_master_send(client, connect_cmd, ARRAY_SIZE(connect_cmd));
if (err < 0) {
usb4604_reset(hub, 0);
return err;
}
hub->mode = USB4604_MODE_HUB;
dev_dbg(dev, "switched to HUB mode\n");
return 0;
}
static int usb4604_switch_mode(struct usb4604 *hub, enum usb4604_mode mode)
{
struct device *dev = hub->dev;
int err = 0;
switch (mode) {
case USB4604_MODE_HUB:
err = usb4604_connect(hub);
break;
case USB4604_MODE_STANDBY:
usb4604_reset(hub, 0);
dev_dbg(dev, "switched to STANDBY mode\n");
break;
default:
dev_err(dev, "unknown mode is requested\n");
err = -EINVAL;
break;
}
return err;
}
static int usb4604_probe(struct usb4604 *hub)
{
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
struct gpio_desc *gpio;
u32 mode = USB4604_MODE_HUB;
gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
hub->gpio_reset = gpio;
if (of_property_read_u32(np, "initial-mode", &hub->mode))
hub->mode = mode;
return usb4604_switch_mode(hub, hub->mode);
}
static int usb4604_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct usb4604 *hub;
hub = devm_kzalloc(&i2c->dev, sizeof(*hub), GFP_KERNEL);
if (!hub)
return -ENOMEM;
i2c_set_clientdata(i2c, hub);
hub->dev = &i2c->dev;
return usb4604_probe(hub);
}
#ifdef CONFIG_PM_SLEEP
static int usb4604_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct usb4604 *hub = i2c_get_clientdata(client);
usb4604_switch_mode(hub, USB4604_MODE_STANDBY);
return 0;
}
static int usb4604_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct usb4604 *hub = i2c_get_clientdata(client);
usb4604_switch_mode(hub, hub->mode);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend,
usb4604_i2c_resume);
static const struct i2c_device_id usb4604_id[] = {
{ "usb4604", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, usb4604_id);
#ifdef CONFIG_OF
static const struct of_device_id usb4604_of_match[] = {
{ .compatible = "smsc,usb4604" },
{}
};
MODULE_DEVICE_TABLE(of, usb4604_of_match);
#endif
static struct i2c_driver usb4604_i2c_driver = {
.driver = {
.name = "usb4604",
.pm = &usb4604_i2c_pm_ops,
.of_match_table = of_match_ptr(usb4604_of_match),
},
.probe = usb4604_i2c_probe,
.id_table = usb4604_id,
};
module_i2c_driver(usb4604_i2c_driver);
MODULE_DESCRIPTION("USB4604 USB HUB driver");
MODULE_LICENSE("GPL v2");
|