Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 | /*
* Support for dw9718 vcm driver.
*
* Copyright (c) 2014 Intel Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*/
#include <linux/delay.h>
#include "dw9718.h"
static struct dw9718_device dw9718_dev;
static int dw9718_i2c_rd8(struct i2c_client *client, u8 reg, u8 *val)
{
struct i2c_msg msg[2];
u8 buf[2] = { reg };
msg[0].addr = DW9718_VCM_ADDR;
msg[0].flags = 0;
msg[0].len = 1;
msg[0].buf = buf;
msg[1].addr = DW9718_VCM_ADDR;
msg[1].flags = I2C_M_RD;
msg[1].len = 1;
msg[1].buf = &buf[1];
*val = 0;
if (i2c_transfer(client->adapter, msg, 2) != 2)
return -EIO;
*val = buf[1];
return 0;
}
static int dw9718_i2c_wr8(struct i2c_client *client, u8 reg, u8 val)
{
struct i2c_msg msg;
u8 buf[2] = { reg, val};
msg.addr = DW9718_VCM_ADDR;
msg.flags = 0;
msg.len = sizeof(buf);
msg.buf = buf;
if (i2c_transfer(client->adapter, &msg, 1) != 1)
return -EIO;
return 0;
}
static int dw9718_i2c_wr16(struct i2c_client *client, u8 reg, u16 val)
{
struct i2c_msg msg;
u8 buf[3] = { reg, (u8)(val >> 8), (u8)(val & 0xff)};
msg.addr = DW9718_VCM_ADDR;
msg.flags = 0;
msg.len = sizeof(buf);
msg.buf = buf;
if (i2c_transfer(client->adapter, &msg, 1) != 1)
return -EIO;
return 0;
}
int dw9718_t_focus_abs(struct v4l2_subdev *sd, s32 value)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret;
value = clamp(value, 0, DW9718_MAX_FOCUS_POS);
ret = dw9718_i2c_wr16(client, DW9718_DATA_M, value);
/*pr_info("%s: value = %d\n", __func__, value);*/
if (ret < 0)
return ret;
getnstimeofday(&dw9718_dev.focus_time);
dw9718_dev.focus = value;
return 0;
}
int dw9718_vcm_power_up(struct v4l2_subdev *sd)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret;
u8 value;
if (dw9718_dev.power_on)
return 0;
/* Enable power */
ret = dw9718_dev.platform_data->power_ctrl(sd, 1);
if (ret) {
dev_err(&client->dev, "DW9718_PD power_ctrl failed %d\n", ret);
return ret;
}
/* Wait for VBAT to stabilize */
udelay(100);
/* Detect device */
ret = dw9718_i2c_rd8(client, DW9718_SACT, &value);
if (ret < 0) {
dev_err(&client->dev, "read DW9718_SACT failed %d\n", ret);
goto fail_powerdown;
}
/*
* WORKAROUND: for module P8V12F-203 which are used on
* Cherrytrail Refresh Davis Reef AoB, register SACT is not
* returning default value as spec. But VCM works as expected and
* root cause is still under discussion with vendor.
* workaround here to avoid aborting the power up sequence and just
* give a warning about this error.
*/
if (value != DW9718_SACT_DEFAULT_VAL)
dev_warn(&client->dev, "%s error, incorrect ID\n", __func__);
/* Initialize according to recommended settings */
ret = dw9718_i2c_wr8(client, DW9718_CONTROL,
DW9718_CONTROL_SW_LINEAR |
DW9718_CONTROL_S_SAC4 |
DW9718_CONTROL_OCP_DISABLE |
DW9718_CONTROL_UVLO_DISABLE);
if (ret < 0) {
dev_err(&client->dev, "write DW9718_CONTROL failed %d\n", ret);
goto fail_powerdown;
}
ret = dw9718_i2c_wr8(client, DW9718_SACT,
DW9718_SACT_MULT_TWO |
DW9718_SACT_PERIOD_8_8MS);
if (ret < 0) {
dev_err(&client->dev, "write DW9718_SACT failed %d\n", ret);
goto fail_powerdown;
}
ret = dw9718_t_focus_abs(sd, dw9718_dev.focus);
if (ret)
return ret;
dw9718_dev.initialized = true;
dw9718_dev.power_on = 1;
return 0;
fail_powerdown:
dev_err(&client->dev, "%s error, powerup failed\n", __func__);
dw9718_dev.platform_data->power_ctrl(sd, 0);
return ret;
}
int dw9718_vcm_power_down(struct v4l2_subdev *sd)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret;
if (!dw9718_dev.power_on)
return 0;
ret = dw9718_dev.platform_data->power_ctrl(sd, 0);
if (ret) {
dev_err(&client->dev, "%s power_ctrl failed\n",
__func__);
return ret;
}
dw9718_dev.power_on = 0;
return 0;
}
int dw9718_q_focus_status(struct v4l2_subdev *sd, s32 *value)
{
static const struct timespec move_time = {
.tv_sec = 0,
.tv_nsec = 60000000
};
struct timespec current_time, finish_time, delta_time;
getnstimeofday(¤t_time);
finish_time = timespec_add(dw9718_dev.focus_time, move_time);
delta_time = timespec_sub(current_time, finish_time);
if (delta_time.tv_sec >= 0 && delta_time.tv_nsec >= 0) {
*value = ATOMISP_FOCUS_HP_COMPLETE |
ATOMISP_FOCUS_STATUS_ACCEPTS_NEW_MOVE;
} else {
*value = ATOMISP_FOCUS_STATUS_MOVING |
ATOMISP_FOCUS_HP_IN_PROGRESS;
}
return 0;
}
int dw9718_t_focus_vcm(struct v4l2_subdev *sd, u16 val)
{
return -EINVAL;
}
int dw9718_t_focus_rel(struct v4l2_subdev *sd, s32 value)
{
return dw9718_t_focus_abs(sd, dw9718_dev.focus + value);
}
int dw9718_q_focus_abs(struct v4l2_subdev *sd, s32 *value)
{
*value = dw9718_dev.focus;
return 0;
}
int dw9718_t_vcm_slew(struct v4l2_subdev *sd, s32 value)
{
return 0;
}
int dw9718_t_vcm_timing(struct v4l2_subdev *sd, s32 value)
{
return 0;
}
int dw9718_vcm_init(struct v4l2_subdev *sd)
{
dw9718_dev.platform_data = camera_get_af_platform_data();
dw9718_dev.focus = DW9718_DEFAULT_FOCUS_POSITION;
dw9718_dev.power_on = 0;
return (NULL == dw9718_dev.platform_data) ? -ENODEV : 0;
}
|