Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 | /*
* Copyright (C) 2015 Infineon Technologies AG
* Copyright (C) 2016 STMicroelectronics SAS
*
* Authors:
* Peter Huewe <peter.huewe@infineon.com>
* Christophe Ricard <christophe-h.ricard@st.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* This device driver implements the TPM interface as defined in
* the TCG TPM Interface Spec version 1.3, revision 27 via _raw/native
* SPI access_.
*
* It is based on the original tpm_tis device driver from Leendert van
* Dorn and Kyleen Hall and Jarko Sakkinnen.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/acpi.h>
#include <linux/freezer.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/tpm.h>
#include "tpm.h"
#include "tpm_tis_core.h"
#define MAX_SPI_FRAMESIZE 64
struct tpm_tis_spi_phy {
struct tpm_tis_data priv;
struct spi_device *spi_device;
u8 tx_buf[MAX_SPI_FRAMESIZE + 4];
u8 rx_buf[MAX_SPI_FRAMESIZE + 4];
};
static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data)
{
return container_of(data, struct tpm_tis_spi_phy, priv);
}
static int tpm_tis_spi_read_bytes(struct tpm_tis_data *data, u32 addr,
u16 len, u8 *result)
{
struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
int ret, i;
struct spi_message m;
struct spi_transfer spi_xfer = {
.tx_buf = phy->tx_buf,
.rx_buf = phy->rx_buf,
.len = 4,
};
if (len > MAX_SPI_FRAMESIZE)
return -ENOMEM;
phy->tx_buf[0] = 0x80 | (len - 1);
phy->tx_buf[1] = 0xd4;
phy->tx_buf[2] = (addr >> 8) & 0xFF;
phy->tx_buf[3] = addr & 0xFF;
spi_xfer.cs_change = 1;
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
spi_bus_lock(phy->spi_device->master);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
goto exit;
memset(phy->tx_buf, 0, len);
/* According to TCG PTP specification, if there is no TPM present at
* all, then the design has a weak pull-up on MISO. If a TPM is not
* present, a pull-up on MISO means that the SB controller sees a 1,
* and will latch in 0xFF on the read.
*/
for (i = 0; (phy->rx_buf[0] & 0x01) == 0 && i < TPM_RETRY; i++) {
spi_xfer.len = 1;
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
goto exit;
}
spi_xfer.cs_change = 0;
spi_xfer.len = len;
spi_xfer.rx_buf = result;
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
ret = spi_sync_locked(phy->spi_device, &m);
exit:
spi_bus_unlock(phy->spi_device->master);
return ret;
}
static int tpm_tis_spi_write_bytes(struct tpm_tis_data *data, u32 addr,
u16 len, u8 *value)
{
struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
int ret, i;
struct spi_message m;
struct spi_transfer spi_xfer = {
.tx_buf = phy->tx_buf,
.rx_buf = phy->rx_buf,
.len = 4,
};
if (len > MAX_SPI_FRAMESIZE)
return -ENOMEM;
phy->tx_buf[0] = len - 1;
phy->tx_buf[1] = 0xd4;
phy->tx_buf[2] = (addr >> 8) & 0xFF;
phy->tx_buf[3] = addr & 0xFF;
spi_xfer.cs_change = 1;
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
spi_bus_lock(phy->spi_device->master);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
goto exit;
memset(phy->tx_buf, 0, len);
/* According to TCG PTP specification, if there is no TPM present at
* all, then the design has a weak pull-up on MISO. If a TPM is not
* present, a pull-up on MISO means that the SB controller sees a 1,
* and will latch in 0xFF on the read.
*/
for (i = 0; (phy->rx_buf[0] & 0x01) == 0 && i < TPM_RETRY; i++) {
spi_xfer.len = 1;
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
goto exit;
}
spi_xfer.len = len;
spi_xfer.tx_buf = value;
spi_xfer.cs_change = 0;
spi_xfer.tx_buf = value;
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
ret = spi_sync_locked(phy->spi_device, &m);
exit:
spi_bus_unlock(phy->spi_device->master);
return ret;
}
static int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
{
int rc;
rc = data->phy_ops->read_bytes(data, addr, sizeof(u16), (u8 *)result);
if (!rc)
*result = le16_to_cpu(*result);
return rc;
}
static int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
{
int rc;
rc = data->phy_ops->read_bytes(data, addr, sizeof(u32), (u8 *)result);
if (!rc)
*result = le32_to_cpu(*result);
return rc;
}
static int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value)
{
value = cpu_to_le32(value);
return data->phy_ops->write_bytes(data, addr, sizeof(u32),
(u8 *)&value);
}
static const struct tpm_tis_phy_ops tpm_spi_phy_ops = {
.read_bytes = tpm_tis_spi_read_bytes,
.write_bytes = tpm_tis_spi_write_bytes,
.read16 = tpm_tis_spi_read16,
.read32 = tpm_tis_spi_read32,
.write32 = tpm_tis_spi_write32,
};
static int tpm_tis_spi_probe(struct spi_device *dev)
{
struct tpm_tis_spi_phy *phy;
phy = devm_kzalloc(&dev->dev, sizeof(struct tpm_tis_spi_phy),
GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->spi_device = dev;
return tpm_tis_core_init(&dev->dev, &phy->priv, -1, &tpm_spi_phy_ops,
NULL);
}
static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
static int tpm_tis_spi_remove(struct spi_device *dev)
{
struct tpm_chip *chip = spi_get_drvdata(dev);
tpm_chip_unregister(chip);
tpm_tis_remove(chip);
return 0;
}
static const struct spi_device_id tpm_tis_spi_id[] = {
{"tpm_tis_spi", 0},
{}
};
MODULE_DEVICE_TABLE(spi, tpm_tis_spi_id);
static const struct of_device_id of_tis_spi_match[] = {
{ .compatible = "st,st33htpm-spi", },
{ .compatible = "infineon,slb9670", },
{ .compatible = "tcg,tpm_tis-spi", },
{}
};
MODULE_DEVICE_TABLE(of, of_tis_spi_match);
static const struct acpi_device_id acpi_tis_spi_match[] = {
{"SMO0768", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, acpi_tis_spi_match);
static struct spi_driver tpm_tis_spi_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "tpm_tis_spi",
.pm = &tpm_tis_pm,
.of_match_table = of_match_ptr(of_tis_spi_match),
.acpi_match_table = ACPI_PTR(acpi_tis_spi_match),
},
.probe = tpm_tis_spi_probe,
.remove = tpm_tis_spi_remove,
.id_table = tpm_tis_spi_id,
};
module_spi_driver(tpm_tis_spi_driver);
MODULE_DESCRIPTION("TPM Driver for native SPI access");
MODULE_LICENSE("GPL");
|