Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 | /*
* phy-ti-pipe3 - PIPE3 PHY driver.
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/phy/phy.h>
#include <linux/of.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
#include <linux/spinlock.h>
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
#define PLL_CONFIGURATION2 0x00000010
#define PLL_CONFIGURATION3 0x00000014
#define PLL_CONFIGURATION4 0x00000020
#define PLL_REGM_MASK 0x001FFE00
#define PLL_REGM_SHIFT 0x9
#define PLL_REGM_F_MASK 0x0003FFFF
#define PLL_REGM_F_SHIFT 0x0
#define PLL_REGN_MASK 0x000001FE
#define PLL_REGN_SHIFT 0x1
#define PLL_SELFREQDCO_MASK 0x0000000E
#define PLL_SELFREQDCO_SHIFT 0x1
#define PLL_SD_MASK 0x0003FC00
#define PLL_SD_SHIFT 10
#define SET_PLL_GO 0x1
#define PLL_LDOPWDN BIT(15)
#define PLL_TICOPWDN BIT(16)
#define PLL_LOCK 0x2
#define PLL_IDLE 0x1
/*
* This is an Empirical value that works, need to confirm the actual
* value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
* to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
*/
#define PLL_IDLE_TIME 100 /* in milliseconds */
#define PLL_LOCK_TIME 100 /* in milliseconds */
struct pipe3_dpll_params {
u16 m;
u8 n;
u8 freq:3;
u8 sd;
u32 mf;
};
struct pipe3_dpll_map {
unsigned long rate;
struct pipe3_dpll_params params;
};
struct ti_pipe3 {
void __iomem *pll_ctrl_base;
struct device *dev;
struct device *control_dev;
struct clk *wkupclk;
struct clk *sys_clk;
struct clk *refclk;
struct clk *div_clk;
struct pipe3_dpll_map *dpll_map;
bool enabled;
spinlock_t lock; /* serialize clock enable/disable */
/* the below flag is needed specifically for SATA */
bool refclk_enabled;
};
static struct pipe3_dpll_map dpll_map_usb[] = {
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
{ }, /* Terminator */
};
static struct pipe3_dpll_map dpll_map_sata[] = {
{12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
{16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
{19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
{20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
{26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
{38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
{ }, /* Terminator */
};
static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
{
return __raw_readl(addr + offset);
}
static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
u32 data)
{
__raw_writel(data, addr + offset);
}
static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
{
unsigned long rate;
struct pipe3_dpll_map *dpll_map = phy->dpll_map;
rate = clk_get_rate(phy->sys_clk);
for (; dpll_map->rate; dpll_map++) {
if (rate == dpll_map->rate)
return &dpll_map->params;
}
dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
return NULL;
}
static int ti_pipe3_power_off(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
omap_control_phy_power(phy->control_dev, 0);
return 0;
}
static int ti_pipe3_power_on(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
omap_control_phy_power(phy->control_dev, 1);
return 0;
}
static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
{
u32 val;
unsigned long timeout;
timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
do {
cpu_relax();
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if (val & PLL_LOCK)
return 0;
} while (!time_after(jiffies, timeout));
dev_err(phy->dev, "DPLL failed to lock\n");
return -EBUSY;
}
static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
{
u32 val;
struct pipe3_dpll_params *dpll_params;
dpll_params = ti_pipe3_get_dpll_params(phy);
if (!dpll_params)
return -EINVAL;
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGN_MASK;
val |= dpll_params->n << PLL_REGN_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val &= ~PLL_SELFREQDCO_MASK;
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGM_MASK;
val |= dpll_params->m << PLL_REGM_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
val &= ~PLL_REGM_F_MASK;
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
val &= ~PLL_SD_MASK;
val |= dpll_params->sd << PLL_SD_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
return ti_pipe3_dpll_wait_lock(phy);
}
static int ti_pipe3_init(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
u32 val;
int ret = 0;
/*
* Set pcie_pcs register to 0x96 for proper functioning of phy
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
* 18-1804.
*/
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
omap_control_pcie_pcs(phy->control_dev, 0x96);
return 0;
}
/* Bring it out of IDLE if it is IDLE */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
if (val & PLL_IDLE) {
val &= ~PLL_IDLE;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
ret = ti_pipe3_dpll_wait_lock(phy);
}
/* Program the DPLL only if not locked */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if (!(val & PLL_LOCK))
if (ti_pipe3_dpll_program(phy))
return -EINVAL;
return ret;
}
static int ti_pipe3_exit(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
u32 val;
unsigned long timeout;
/* SATA DPLL can't be powered down due to Errata i783 and PCIe
* does not have internal DPLL
*/
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") ||
of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
return 0;
/* Put DPLL in IDLE mode */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val |= PLL_IDLE;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
/* wait for LDO and Oscillator to power down */
timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
do {
cpu_relax();
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
break;
} while (!time_after(jiffies, timeout));
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
val);
return -EBUSY;
}
return 0;
}
static struct phy_ops ops = {
.init = ti_pipe3_init,
.exit = ti_pipe3_exit,
.power_on = ti_pipe3_power_on,
.power_off = ti_pipe3_power_off,
.owner = THIS_MODULE,
};
static const struct of_device_id ti_pipe3_id_table[];
static int ti_pipe3_probe(struct platform_device *pdev)
{
struct ti_pipe3 *phy;
struct phy *generic_phy;
struct phy_provider *phy_provider;
struct resource *res;
struct device_node *node = pdev->dev.of_node;
struct device_node *control_node;
struct platform_device *control_pdev;
const struct of_device_id *match;
struct clk *clk;
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->dev = &pdev->dev;
spin_lock_init(&phy->lock);
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
match = of_match_device(ti_pipe3_id_table, &pdev->dev);
if (!match)
return -EINVAL;
phy->dpll_map = (struct pipe3_dpll_map *)match->data;
if (!phy->dpll_map) {
dev_err(&pdev->dev, "no DPLL data\n");
return -EINVAL;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pll_ctrl");
phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(phy->pll_ctrl_base))
return PTR_ERR(phy->pll_ctrl_base);
phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
dev_err(&pdev->dev, "unable to get sysclk\n");
return -EINVAL;
}
}
phy->refclk = devm_clk_get(phy->dev, "refclk");
if (IS_ERR(phy->refclk)) {
dev_err(&pdev->dev, "unable to get refclk\n");
/* older DTBs have missing refclk in SATA PHY
* so don't bail out in case of SATA PHY.
*/
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
return PTR_ERR(phy->refclk);
}
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
dev_err(&pdev->dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
} else {
phy->wkupclk = ERR_PTR(-ENODEV);
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
clk = devm_clk_get(phy->dev, "dpll_ref");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "unable to get dpll ref clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 1500000000);
clk = devm_clk_get(phy->dev, "dpll_ref_m2");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
clk = devm_clk_get(phy->dev, "phy-div");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "unable to get phy-div clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
phy->div_clk = devm_clk_get(phy->dev, "div-clk");
if (IS_ERR(phy->div_clk)) {
dev_err(&pdev->dev, "unable to get div-clk\n");
return PTR_ERR(phy->div_clk);
}
} else {
phy->div_clk = ERR_PTR(-ENODEV);
}
control_node = of_parse_phandle(node, "ctrl-module", 0);
if (!control_node) {
dev_err(&pdev->dev, "Failed to get control device phandle\n");
return -EINVAL;
}
control_pdev = of_find_device_by_node(control_node);
if (!control_pdev) {
dev_err(&pdev->dev, "Failed to get control device\n");
return -EINVAL;
}
phy->control_dev = &control_pdev->dev;
omap_control_phy_power(phy->control_dev, 0);
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
pm_runtime_get(&pdev->dev);
return 0;
}
static int ti_pipe3_remove(struct platform_device *pdev)
{
if (!pm_runtime_suspended(&pdev->dev))
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
#ifdef CONFIG_PM
static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
{
if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
int ret;
ret = clk_prepare_enable(phy->refclk);
if (ret) {
dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
return ret;
}
phy->refclk_enabled = true;
}
return 0;
}
static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
{
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
phy->refclk_enabled = false;
}
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
{
int ret = 0;
unsigned long flags;
spin_lock_irqsave(&phy->lock, flags);
if (phy->enabled)
goto err1;
ret = ti_pipe3_enable_refclk(phy);
if (ret)
goto err1;
if (!IS_ERR(phy->wkupclk)) {
ret = clk_prepare_enable(phy->wkupclk);
if (ret) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto err2;
}
}
if (!IS_ERR(phy->div_clk)) {
ret = clk_prepare_enable(phy->div_clk);
if (ret) {
dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
goto err3;
}
}
phy->enabled = true;
spin_unlock_irqrestore(&phy->lock, flags);
return 0;
err3:
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
err2:
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
ti_pipe3_disable_refclk(phy);
err1:
spin_unlock_irqrestore(&phy->lock, flags);
return ret;
}
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
{
unsigned long flags;
spin_lock_irqsave(&phy->lock, flags);
if (!phy->enabled) {
spin_unlock_irqrestore(&phy->lock, flags);
return;
}
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
/* Don't disable refclk for SATA PHY due to Errata i783 */
if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
ti_pipe3_disable_refclk(phy);
if (!IS_ERR(phy->div_clk))
clk_disable_unprepare(phy->div_clk);
phy->enabled = false;
spin_unlock_irqrestore(&phy->lock, flags);
}
static int ti_pipe3_runtime_suspend(struct device *dev)
{
struct ti_pipe3 *phy = dev_get_drvdata(dev);
ti_pipe3_disable_clocks(phy);
return 0;
}
static int ti_pipe3_runtime_resume(struct device *dev)
{
struct ti_pipe3 *phy = dev_get_drvdata(dev);
int ret = 0;
ret = ti_pipe3_enable_clocks(phy);
return ret;
}
static int ti_pipe3_suspend(struct device *dev)
{
struct ti_pipe3 *phy = dev_get_drvdata(dev);
ti_pipe3_disable_clocks(phy);
return 0;
}
static int ti_pipe3_resume(struct device *dev)
{
struct ti_pipe3 *phy = dev_get_drvdata(dev);
int ret;
ret = ti_pipe3_enable_clocks(phy);
if (ret)
return ret;
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
}
#endif
static const struct dev_pm_ops ti_pipe3_pm_ops = {
SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
ti_pipe3_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
};
static const struct of_device_id ti_pipe3_id_table[] = {
{
.compatible = "ti,phy-usb3",
.data = dpll_map_usb,
},
{
.compatible = "ti,omap-usb3",
.data = dpll_map_usb,
},
{
.compatible = "ti,phy-pipe3-sata",
.data = dpll_map_sata,
},
{
.compatible = "ti,phy-pipe3-pcie",
},
{}
};
MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
static struct platform_driver ti_pipe3_driver = {
.probe = ti_pipe3_probe,
.remove = ti_pipe3_remove,
.driver = {
.name = "ti-pipe3",
.pm = &ti_pipe3_pm_ops,
.of_match_table = ti_pipe3_id_table,
},
};
module_platform_driver(ti_pipe3_driver);
MODULE_ALIAS("platform:ti_pipe3");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("TI PIPE3 phy driver");
MODULE_LICENSE("GPL v2");
|