Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 | /*
* LCD panel support for the TI OMAP H3 board
*
* Copyright (C) 2004 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
return 0;
}
static void h3_panel_cleanup(struct lcd_panel *panel)
{
}
static int h3_panel_enable(struct lcd_panel *panel)
{
int r = 0;
/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
r = tps65010_set_gpio_out_value(GPIO1, HIGH);
if (!r)
r = tps65010_set_gpio_out_value(GPIO2, HIGH);
if (r)
pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
return r;
}
static void h3_panel_disable(struct lcd_panel *panel)
{
int r = 0;
/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
r = tps65010_set_gpio_out_value(GPIO1, LOW);
if (!r)
tps65010_set_gpio_out_value(GPIO2, LOW);
if (r)
pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
}
static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
struct lcd_panel h3_panel = {
.name = "h3",
.config = OMAP_LCDC_PANEL_TFT,
.data_lines = 16,
.bpp = 16,
.x_res = 240,
.y_res = 320,
.pixel_clock = 12000,
.hsw = 12,
.hfp = 14,
.hbp = 72 - 12,
.vsw = 1,
.vfp = 1,
.vbp = 0,
.pcd = 0,
.init = h3_panel_init,
.cleanup = h3_panel_cleanup,
.enable = h3_panel_enable,
.disable = h3_panel_disable,
.get_caps = h3_panel_get_caps,
};
static int h3_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&h3_panel);
return 0;
}
static int h3_panel_remove(struct platform_device *pdev)
{
return 0;
}
static int h3_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
{
return 0;
}
static int h3_panel_resume(struct platform_device *pdev)
{
return 0;
}
struct platform_driver h3_panel_driver = {
.probe = h3_panel_probe,
.remove = h3_panel_remove,
.suspend = h3_panel_suspend,
.resume = h3_panel_resume,
.driver = {
.name = "lcd_h3",
.owner = THIS_MODULE,
},
};
static int __init h3_panel_drv_init(void)
{
return platform_driver_register(&h3_panel_driver);
}
static void __exit h3_panel_drv_cleanup(void)
{
platform_driver_unregister(&h3_panel_driver);
}
module_init(h3_panel_drv_init);
module_exit(h3_panel_drv_cleanup);
|