Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 | /*
* arch/arm/mach-vt8500/timer.c
*
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/delay.h>
#include <asm/mach/time.h>
#include "devices.h"
#define VT8500_TIMER_OFFSET 0x0100
#define TIMER_MATCH_VAL 0x0000
#define TIMER_COUNT_VAL 0x0010
#define TIMER_STATUS_VAL 0x0014
#define TIMER_IER_VAL 0x001c /* interrupt enable */
#define TIMER_CTRL_VAL 0x0020
#define TIMER_AS_VAL 0x0024 /* access status */
#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
#define VT8500_TIMER_HZ 3000000
#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
static void __iomem *regbase;
static cycle_t vt8500_timer_read(struct clocksource *cs)
{
int loops = msecs_to_loops(10);
writel(3, regbase + TIMER_CTRL_VAL);
while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
&& --loops)
cpu_relax();
return readl(regbase + TIMER_COUNT_VAL);
}
struct clocksource clocksource = {
.name = "vt8500_timer",
.rating = 200,
.read = vt8500_timer_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int vt8500_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
int loops = msecs_to_loops(10);
cycle_t alarm = clocksource.read(&clocksource) + cycles;
while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
&& --loops)
cpu_relax();
writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
return -ETIME;
writel(1, regbase + TIMER_IER_VAL);
return 0;
}
static void vt8500_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
switch (mode) {
case CLOCK_EVT_MODE_RESUME:
case CLOCK_EVT_MODE_PERIODIC:
break;
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
writel(readl(regbase + TIMER_CTRL_VAL) | 1,
regbase + TIMER_CTRL_VAL);
writel(0, regbase + TIMER_IER_VAL);
break;
}
}
struct clock_event_device clockevent = {
.name = "vt8500_timer",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
.set_next_event = vt8500_timer_set_next_event,
.set_mode = vt8500_timer_set_mode,
};
static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
writel(0xf, regbase + TIMER_STATUS_VAL);
evt->event_handler(evt);
return IRQ_HANDLED;
}
struct irqaction irq = {
.name = "vt8500_timer",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = vt8500_timer_interrupt,
.dev_id = &clockevent,
};
static void __init vt8500_timer_init(void)
{
regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
if (!regbase)
printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
writel(1, regbase + TIMER_CTRL_VAL);
writel(0xf, regbase + TIMER_STATUS_VAL);
writel(~0, regbase + TIMER_MATCH_VAL);
if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
clocksource.name);
clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
/* copy-pasted from mach-msm; no idea */
clockevent.max_delta_ns =
clockevent_delta2ns(0xf0000000, &clockevent);
clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
clockevent.cpumask = cpumask_of(0);
if (setup_irq(wmt_timer_irq, &irq))
printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
clockevent.name);
clockevents_register_device(&clockevent);
}
struct sys_timer vt8500_timer = {
.init = vt8500_timer_init
};
|