Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 | /*
comedi/drivers/cb_pcimdas.c
Comedi driver for Computer Boards PCIM-DAS1602/16
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 2000 David A. Schleef <ds@schleef.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
Driver: cb_pcimdas
Description: Measurement Computing PCI Migration series boards
Devices: [ComputerBoards] PCIM-DAS1602/16 (cb_pcimdas)
Author: Richard Bytheway
Updated: Wed, 13 Nov 2002 12:34:56 +0000
Status: experimental
Written to support the PCIM-DAS1602/16 on a 2.4 series kernel.
Configuration Options:
[0] - PCI bus number
[1] - PCI slot number
Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
Only supports DIO, AO and simple AI in it's present form.
No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
*/
#include "../comedidev.h"
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "comedi_pci.h"
#include "plx9052.h"
#include "8255.h"
/* #define CBPCIMDAS_DEBUG */
#undef CBPCIMDAS_DEBUG
#define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307
/* Registers for the PCIM-DAS1602/16 */
/* sizes of io regions (bytes) */
#define BADR0_SIZE 2 /* ?? */
#define BADR1_SIZE 4
#define BADR2_SIZE 6
#define BADR3_SIZE 16
#define BADR4_SIZE 4
/* DAC Offsets */
#define ADC_TRIG 0
#define DAC0_OFFSET 2
#define DAC1_OFFSET 4
/* AI and Counter Constants */
#define MUX_LIMITS 0
#define MAIN_CONN_DIO 1
#define ADC_STAT 2
#define ADC_CONV_STAT 3
#define ADC_INT 4
#define ADC_PACER 5
#define BURST_MODE 6
#define PROG_GAIN 7
#define CLK8254_1_DATA 8
#define CLK8254_2_DATA 9
#define CLK8254_3_DATA 10
#define CLK8254_CONTROL 11
#define USER_COUNTER 12
#define RESID_COUNT_H 13
#define RESID_COUNT_L 14
/* Board description */
struct cb_pcimdas_board {
const char *name;
unsigned short device_id;
int ai_se_chans; /* Inputs in single-ended mode */
int ai_diff_chans; /* Inputs in differential mode */
int ai_bits; /* analog input resolution */
int ai_speed; /* fastest conversion period in ns */
int ao_nchan; /* number of analog out channels */
int ao_bits; /* analogue output resolution */
int has_ao_fifo; /* analog output has fifo */
int ao_scan_speed; /* analog output speed for 1602 series (for a scan, not conversion) */
int fifo_size; /* number of samples fifo can hold */
int dio_bits; /* number of dio bits */
int has_dio; /* has DIO */
const struct comedi_lrange *ranges;
};
static const struct cb_pcimdas_board cb_pcimdas_boards[] = {
{
.name = "PCIM-DAS1602/16",
.device_id = 0x56,
.ai_se_chans = 16,
.ai_diff_chans = 8,
.ai_bits = 16,
.ai_speed = 10000, /* ?? */
.ao_nchan = 2,
.ao_bits = 12,
.has_ao_fifo = 0, /* ?? */
.ao_scan_speed = 10000,
/* ?? */
.fifo_size = 1024,
.dio_bits = 24,
.has_dio = 1,
/* .ranges = &cb_pcimdas_ranges, */
},
};
/* This is used by modprobe to translate PCI IDs to drivers. Should
* only be used for PCI and ISA-PnP devices */
static DEFINE_PCI_DEVICE_TABLE(cb_pcimdas_pci_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0056) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
#define N_BOARDS 1 /* Max number of boards supported */
/*
* Useful for shorthand access to the particular board structure
*/
#define thisboard ((const struct cb_pcimdas_board *)dev->board_ptr)
/* this structure is for data unique to this hardware driver. If
several hardware drivers keep similar information in this structure,
feel free to suggest moving the variable to the struct comedi_device struct. */
struct cb_pcimdas_private {
int data;
/* would be useful for a PCI device */
struct pci_dev *pci_dev;
/* base addresses */
unsigned long BADR0;
unsigned long BADR1;
unsigned long BADR2;
unsigned long BADR3;
unsigned long BADR4;
/* Used for AO readback */
unsigned int ao_readback[2];
/* Used for DIO */
unsigned short int port_a; /* copy of BADR4+0 */
unsigned short int port_b; /* copy of BADR4+1 */
unsigned short int port_c; /* copy of BADR4+2 */
unsigned short int dio_mode; /* copy of BADR4+3 */
};
/*
* most drivers define the following macro to make it easy to
* access the private structure.
*/
#define devpriv ((struct cb_pcimdas_private *)dev->private)
/*
* The struct comedi_driver structure tells the Comedi core module
* which functions to call to configure/deconfigure (attach/detach)
* the board, and also about the kernel module that contains
* the device code.
*/
static int cb_pcimdas_attach(struct comedi_device *dev,
struct comedi_devconfig *it);
static int cb_pcimdas_detach(struct comedi_device *dev);
static struct comedi_driver driver_cb_pcimdas = {
.driver_name = "cb_pcimdas",
.module = THIS_MODULE,
.attach = cb_pcimdas_attach,
.detach = cb_pcimdas_detach,
};
static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
static int cb_pcimdas_ao_winsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
static int cb_pcimdas_ao_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
/*
* Attach is called by the Comedi core to configure the driver
* for a particular board. If you specified a board_name array
* in the driver structure, dev->board_ptr contains that
* address.
*/
static int cb_pcimdas_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
struct comedi_subdevice *s;
struct pci_dev *pcidev = NULL;
int index;
/* int i; */
printk("comedi%d: cb_pcimdas: ", dev->minor);
/*
* Allocate the private structure area.
*/
if (alloc_private(dev, sizeof(struct cb_pcimdas_private)) < 0)
return -ENOMEM;
/*
* Probe the device to determine what device in the series it is.
*/
printk("\n");
for_each_pci_dev(pcidev) {
/* is it not a computer boards card? */
if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
continue;
/* loop through cards supported by this driver */
for (index = 0; index < N_BOARDS; index++) {
if (cb_pcimdas_boards[index].device_id !=
pcidev->device)
continue;
/* was a particular bus/slot requested? */
if (it->options[0] || it->options[1]) {
/* are we on the wrong bus/slot? */
if (pcidev->bus->number != it->options[0] ||
PCI_SLOT(pcidev->devfn) != it->options[1]) {
continue;
}
}
devpriv->pci_dev = pcidev;
dev->board_ptr = cb_pcimdas_boards + index;
goto found;
}
}
printk("No supported ComputerBoards/MeasurementComputing card found on "
"requested position\n");
return -EIO;
found:
printk("Found %s on bus %i, slot %i\n", cb_pcimdas_boards[index].name,
pcidev->bus->number, PCI_SLOT(pcidev->devfn));
/* Warn about non-tested features */
switch (thisboard->device_id) {
case 0x56:
break;
default:
printk("THIS CARD IS UNSUPPORTED.\n"
"PLEASE REPORT USAGE TO <mocelet@sucs.org>\n");
}
if (comedi_pci_enable(pcidev, "cb_pcimdas")) {
printk(" Failed to enable PCI device and request regions\n");
return -EIO;
}
devpriv->BADR0 = pci_resource_start(devpriv->pci_dev, 0);
devpriv->BADR1 = pci_resource_start(devpriv->pci_dev, 1);
devpriv->BADR2 = pci_resource_start(devpriv->pci_dev, 2);
devpriv->BADR3 = pci_resource_start(devpriv->pci_dev, 3);
devpriv->BADR4 = pci_resource_start(devpriv->pci_dev, 4);
#ifdef CBPCIMDAS_DEBUG
printk("devpriv->BADR0 = 0x%lx\n", devpriv->BADR0);
printk("devpriv->BADR1 = 0x%lx\n", devpriv->BADR1);
printk("devpriv->BADR2 = 0x%lx\n", devpriv->BADR2);
printk("devpriv->BADR3 = 0x%lx\n", devpriv->BADR3);
printk("devpriv->BADR4 = 0x%lx\n", devpriv->BADR4);
#endif
/* Dont support IRQ yet */
/* get irq */
/* if(request_irq(devpriv->pci_dev->irq, cb_pcimdas_interrupt, IRQF_SHARED, "cb_pcimdas", dev )) */
/* { */
/* printk(" unable to allocate irq %u\n", devpriv->pci_dev->irq); */
/* return -EINVAL; */
/* } */
/* dev->irq = devpriv->pci_dev->irq; */
/* Initialize dev->board_name */
dev->board_name = thisboard->name;
/*
* Allocate the subdevice structures. alloc_subdevice() is a
* convenient macro defined in comedidev.h.
*/
if (alloc_subdevices(dev, 3) < 0)
return -ENOMEM;
s = dev->subdevices + 0;
/* dev->read_subdev=s; */
/* analog input subdevice */
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
s->n_chan = thisboard->ai_se_chans;
s->maxdata = (1 << thisboard->ai_bits) - 1;
s->range_table = &range_unknown;
s->len_chanlist = 1; /* This is the maximum chanlist length that */
/* the board can handle */
s->insn_read = cb_pcimdas_ai_rinsn;
s = dev->subdevices + 1;
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = thisboard->ao_nchan;
s->maxdata = 1 << thisboard->ao_bits;
s->range_table = &range_unknown; /* ranges are hardware settable, but not software readable. */
s->insn_write = &cb_pcimdas_ao_winsn;
s->insn_read = &cb_pcimdas_ao_rinsn;
s = dev->subdevices + 2;
/* digital i/o subdevice */
if (thisboard->has_dio)
subdev_8255_init(dev, s, NULL, devpriv->BADR4);
else
s->type = COMEDI_SUBD_UNUSED;
printk("attached\n");
return 1;
}
/*
* _detach is called to deconfigure a device. It should deallocate
* resources.
* This function is also called when _attach() fails, so it should be
* careful not to release resources that were not necessarily
* allocated by _attach(). dev->private and dev->subdevices are
* deallocated automatically by the core.
*/
static int cb_pcimdas_detach(struct comedi_device *dev)
{
#ifdef CBPCIMDAS_DEBUG
if (devpriv) {
printk("devpriv->BADR0 = 0x%lx\n", devpriv->BADR0);
printk("devpriv->BADR1 = 0x%lx\n", devpriv->BADR1);
printk("devpriv->BADR2 = 0x%lx\n", devpriv->BADR2);
printk("devpriv->BADR3 = 0x%lx\n", devpriv->BADR3);
printk("devpriv->BADR4 = 0x%lx\n", devpriv->BADR4);
}
#endif
printk("comedi%d: cb_pcimdas: remove\n", dev->minor);
if (dev->irq)
free_irq(dev->irq, dev);
if (devpriv) {
if (devpriv->pci_dev) {
if (devpriv->BADR0)
comedi_pci_disable(devpriv->pci_dev);
pci_dev_put(devpriv->pci_dev);
}
}
return 0;
}
/*
* "instructions" read/write data in "one-shot" or "software-triggered"
* mode.
*/
static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
int n, i;
unsigned int d;
unsigned int busy;
int chan = CR_CHAN(insn->chanspec);
unsigned short chanlims;
int maxchans;
/* only support sw initiated reads from a single channel */
/* check channel number */
if ((inb(devpriv->BADR3 + 2) & 0x20) == 0) /* differential mode */
maxchans = thisboard->ai_diff_chans;
else
maxchans = thisboard->ai_se_chans;
if (chan > (maxchans - 1))
return -ETIMEDOUT; /* *** Wrong error code. Fixme. */
/* configure for sw initiated read */
d = inb(devpriv->BADR3 + 5);
if ((d & 0x03) > 0) { /* only reset if needed. */
d = d & 0xfd;
outb(d, devpriv->BADR3 + 5);
}
outb(0x01, devpriv->BADR3 + 6); /* set bursting off, conversions on */
outb(0x00, devpriv->BADR3 + 7); /* set range to 10V. UP/BP is controlled by a switch on the board */
/* write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. */
chanlims = chan | (chan << 4);
outb(chanlims, devpriv->BADR3 + 0);
/* convert n samples */
for (n = 0; n < insn->n; n++) {
/* trigger conversion */
outw(0, devpriv->BADR2 + 0);
#define TIMEOUT 1000 /* typically takes 5 loops on a lightly loaded Pentium 100MHz, */
/* this is likely to be 100 loops on a 2GHz machine, so set 1000 as the limit. */
/* wait for conversion to end */
for (i = 0; i < TIMEOUT; i++) {
busy = inb(devpriv->BADR3 + 2) & 0x80;
if (!busy)
break;
}
if (i == TIMEOUT) {
printk("timeout\n");
return -ETIMEDOUT;
}
/* read data */
d = inw(devpriv->BADR2 + 0);
/* mangle the data as necessary */
/* d ^= 1<<(thisboard->ai_bits-1); // 16 bit data from ADC, so no mangle needed. */
data[n] = d;
}
/* return the number of samples read/written */
return n;
}
static int cb_pcimdas_ao_winsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
int i;
int chan = CR_CHAN(insn->chanspec);
/* Writing a list of values to an AO channel is probably not
* very useful, but that's how the interface is defined. */
for (i = 0; i < insn->n; i++) {
switch (chan) {
case 0:
outw(data[i] & 0x0FFF, devpriv->BADR2 + DAC0_OFFSET);
break;
case 1:
outw(data[i] & 0x0FFF, devpriv->BADR2 + DAC1_OFFSET);
break;
default:
return -1;
}
devpriv->ao_readback[chan] = data[i];
}
/* return the number of samples read/written */
return i;
}
/* AO subdevices should have a read insn as well as a write insn.
* Usually this means copying a value stored in devpriv. */
static int cb_pcimdas_ao_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
int i;
int chan = CR_CHAN(insn->chanspec);
for (i = 0; i < insn->n; i++)
data[i] = devpriv->ao_readback[chan];
return i;
}
/*
* A convenient macro that defines init_module() and cleanup_module(),
* as necessary.
*/
static int __devinit driver_cb_pcimdas_pci_probe(struct pci_dev *dev,
const struct pci_device_id
*ent)
{
return comedi_pci_auto_config(dev, driver_cb_pcimdas.driver_name);
}
static void __devexit driver_cb_pcimdas_pci_remove(struct pci_dev *dev)
{
comedi_pci_auto_unconfig(dev);
}
static struct pci_driver driver_cb_pcimdas_pci_driver = {
.id_table = cb_pcimdas_pci_table,
.probe = &driver_cb_pcimdas_pci_probe,
.remove = __devexit_p(&driver_cb_pcimdas_pci_remove)
};
static int __init driver_cb_pcimdas_init_module(void)
{
int retval;
retval = comedi_driver_register(&driver_cb_pcimdas);
if (retval < 0)
return retval;
driver_cb_pcimdas_pci_driver.name =
(char *)driver_cb_pcimdas.driver_name;
return pci_register_driver(&driver_cb_pcimdas_pci_driver);
}
static void __exit driver_cb_pcimdas_cleanup_module(void)
{
pci_unregister_driver(&driver_cb_pcimdas_pci_driver);
comedi_driver_unregister(&driver_cb_pcimdas);
}
module_init(driver_cb_pcimdas_init_module);
module_exit(driver_cb_pcimdas_cleanup_module);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
|