/*
 * Copyright (c) 2010 Broadcom Corporation
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#ifndef	_SBCONFIG_H
#define	_SBCONFIG_H

/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define	_PADLINE(line)	pad ## line
#define	_XSTR(line)	_PADLINE(line)
#define	PAD		_XSTR(__LINE__)
#endif

/* enumeration in SB is based on the premise that cores are contiguos in the
 * enumeration space.
 */
#define SB_BUS_SIZE		0x10000	/* Each bus gets 64Kbytes for cores */
#define SB_BUS_BASE(b)		(SI_ENUM_BASE + (b) * SB_BUS_SIZE)
#define	SB_BUS_MAXCORES		(SB_BUS_SIZE / SI_CORE_SIZE)	/* Max cores per bus */

/*
 * Sonics Configuration Space Registers.
 */
#define	SBCONFIGOFF		0xf00	/* core sbconfig regs are top 256bytes of regs */
#define	SBCONFIGSIZE		256	/* sizeof (sbconfig_t) */

#define SBIPSFLAG		0x08
#define SBTPSFLAG		0x18
#define	SBTMERRLOGA		0x48	/* sonics >= 2.3 */
#define	SBTMERRLOG		0x50	/* sonics >= 2.3 */
#define SBADMATCH3		0x60
#define SBADMATCH2		0x68
#define SBADMATCH1		0x70
#define SBIMSTATE		0x90
#define SBINTVEC		0x94
#define SBTMSTATELOW		0x98
#define SBTMSTATEHIGH		0x9c
#define SBBWA0			0xa0
#define SBIMCONFIGLOW		0xa8
#define SBIMCONFIGHIGH		0xac
#define SBADMATCH0		0xb0
#define SBTMCONFIGLOW		0xb8
#define SBTMCONFIGHIGH		0xbc
#define SBBCONFIG		0xc0
#define SBBSTATE		0xc8
#define SBACTCNFG		0xd8
#define	SBFLAGST		0xe8
#define SBIDLOW			0xf8
#define SBIDHIGH		0xfc

/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
 * a few registers *below* that line. I think it would be very confusing to try
 * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
 */

#define SBIMERRLOGA		0xea8
#define SBIMERRLOG		0xeb0
#define SBTMPORTCONNID0		0xed8
#define SBTMPORTLOCK0		0xef8

#ifndef _LANGUAGE_ASSEMBLY

typedef volatile struct _sbconfig {
	u32 PAD[2];
	u32 sbipsflag;	/* initiator port ocp slave flag */
	u32 PAD[3];
	u32 sbtpsflag;	/* target port ocp slave flag */
	u32 PAD[11];
	u32 sbtmerrloga;	/* (sonics >= 2.3) */
	u32 PAD;
	u32 sbtmerrlog;	/* (sonics >= 2.3) */
	u32 PAD[3];
	u32 sbadmatch3;	/* address match3 */
	u32 PAD;
	u32 sbadmatch2;	/* address match2 */
	u32 PAD;
	u32 sbadmatch1;	/* address match1 */
	u32 PAD[7];
	u32 sbimstate;	/* initiator agent state */
	u32 sbintvec;	/* interrupt mask */
	u32 sbtmstatelow;	/* target state */
	u32 sbtmstatehigh;	/* target state */
	u32 sbbwa0;		/* bandwidth allocation table0 */
	u32 PAD;
	u32 sbimconfiglow;	/* initiator configuration */
	u32 sbimconfighigh;	/* initiator configuration */
	u32 sbadmatch0;	/* address match0 */
	u32 PAD;
	u32 sbtmconfiglow;	/* target configuration */
	u32 sbtmconfighigh;	/* target configuration */
	u32 sbbconfig;	/* broadcast configuration */
	u32 PAD;
	u32 sbbstate;	/* broadcast state */
	u32 PAD[3];
	u32 sbactcnfg;	/* activate configuration */
	u32 PAD[3];
	u32 sbflagst;	/* current sbflags */
	u32 PAD[3];
	u32 sbidlow;		/* identification */
	u32 sbidhigh;	/* identification */
} sbconfig_t;

#endif				/* _LANGUAGE_ASSEMBLY */

/* sbipsflag */
#define	SBIPS_INT1_MASK		0x3f	/* which sbflags get routed to mips interrupt 1 */
#define	SBIPS_INT1_SHIFT	0
#define	SBIPS_INT2_MASK		0x3f00	/* which sbflags get routed to mips interrupt 2 */
#define	SBIPS_INT2_SHIFT	8
#define	SBIPS_INT3_MASK		0x3f0000	/* which sbflags get routed to mips interrupt 3 */
#define	SBIPS_INT3_SHIFT	16
#define	SBIPS_INT4_MASK		0x3f000000	/* which sbflags get routed to mips interrupt 4 */
#define	SBIPS_INT4_SHIFT	24

/* sbtpsflag */
#define	SBTPS_NUM0_MASK		0x3f	/* interrupt sbFlag # generated by this core */
#define	SBTPS_F0EN0		0x40	/* interrupt is always sent on the backplane */

/* sbtmerrlog */
#define	SBTMEL_CM		0x00000007	/* command */
#define	SBTMEL_CI		0x0000ff00	/* connection id */
#define	SBTMEL_EC		0x0f000000	/* error code */
#define	SBTMEL_ME		0x80000000	/* multiple error */

/* sbimstate */
#define	SBIM_PC			0xf	/* pipecount */
#define	SBIM_AP_MASK		0x30	/* arbitration policy */
#define	SBIM_AP_BOTH		0x00	/* use both timeslaces and token */
#define	SBIM_AP_TS		0x10	/* use timesliaces only */
#define	SBIM_AP_TK		0x20	/* use token only */
#define	SBIM_AP_RSV		0x30	/* reserved */
#define	SBIM_IBE		0x20000	/* inbanderror */
#define	SBIM_TO			0x40000	/* timeout */
#define	SBIM_BY			0x01800000	/* busy (sonics >= 2.3) */
#define	SBIM_RJ			0x02000000	/* reject (sonics >= 2.3) */

/* sbtmstatelow */
#define	SBTML_RESET		0x0001	/* reset */
#define	SBTML_REJ_MASK		0x0006	/* reject field */
#define	SBTML_REJ		0x0002	/* reject */
#define	SBTML_TMPREJ		0x0004	/* temporary reject, for error recovery */

#define	SBTML_SICF_SHIFT	16	/* Shift to locate the SI control flags in sbtml */

/* sbtmstatehigh */
#define	SBTMH_SERR		0x0001	/* serror */
#define	SBTMH_INT		0x0002	/* interrupt */
#define	SBTMH_BUSY		0x0004	/* busy */
#define	SBTMH_TO		0x0020	/* timeout (sonics >= 2.3) */

#define	SBTMH_SISF_SHIFT	16	/* Shift to locate the SI status flags in sbtmh */

/* sbbwa0 */
#define	SBBWA_TAB0_MASK		0xffff	/* lookup table 0 */
#define	SBBWA_TAB1_MASK		0xffff	/* lookup table 1 */
#define	SBBWA_TAB1_SHIFT	16

/* sbimconfiglow */
#define	SBIMCL_STO_MASK		0x7	/* service timeout */
#define	SBIMCL_RTO_MASK		0x70	/* request timeout */
#define	SBIMCL_RTO_SHIFT	4
#define	SBIMCL_CID_MASK		0xff0000	/* connection id */
#define	SBIMCL_CID_SHIFT	16

/* sbimconfighigh */
#define	SBIMCH_IEM_MASK		0xc	/* inband error mode */
#define	SBIMCH_TEM_MASK		0x30	/* timeout error mode */
#define	SBIMCH_TEM_SHIFT	4
#define	SBIMCH_BEM_MASK		0xc0	/* bus error mode */
#define	SBIMCH_BEM_SHIFT	6

/* sbadmatch0 */
#define	SBAM_TYPE_MASK		0x3	/* address type */
#define	SBAM_AD64		0x4	/* reserved */
#define	SBAM_ADINT0_MASK	0xf8	/* type0 size */
#define	SBAM_ADINT0_SHIFT	3
#define	SBAM_ADINT1_MASK	0x1f8	/* type1 size */
#define	SBAM_ADINT1_SHIFT	3
#define	SBAM_ADINT2_MASK	0x1f8	/* type2 size */
#define	SBAM_ADINT2_SHIFT	3
#define	SBAM_ADEN		0x400	/* enable */
#define	SBAM_ADNEG		0x800	/* negative decode */
#define	SBAM_BASE0_MASK		0xffffff00	/* type0 base address */
#define	SBAM_BASE0_SHIFT	8
#define	SBAM_BASE1_MASK		0xfffff000	/* type1 base address for the core */
#define	SBAM_BASE1_SHIFT	12
#define	SBAM_BASE2_MASK		0xffff0000	/* type2 base address for the core */
#define	SBAM_BASE2_SHIFT	16

/* sbtmconfiglow */
#define	SBTMCL_CD_MASK		0xff	/* clock divide */
#define	SBTMCL_CO_MASK		0xf800	/* clock offset */
#define	SBTMCL_CO_SHIFT		11
#define	SBTMCL_IF_MASK		0xfc0000	/* interrupt flags */
#define	SBTMCL_IF_SHIFT		18
#define	SBTMCL_IM_MASK		0x3000000	/* interrupt mode */
#define	SBTMCL_IM_SHIFT		24

/* sbtmconfighigh */
#define	SBTMCH_BM_MASK		0x3	/* busy mode */
#define	SBTMCH_RM_MASK		0x3	/* retry mode */
#define	SBTMCH_RM_SHIFT		2
#define	SBTMCH_SM_MASK		0x30	/* stop mode */
#define	SBTMCH_SM_SHIFT		4
#define	SBTMCH_EM_MASK		0x300	/* sb error mode */
#define	SBTMCH_EM_SHIFT		8
#define	SBTMCH_IM_MASK		0xc00	/* int mode */
#define	SBTMCH_IM_SHIFT		10

/* sbbconfig */
#define	SBBC_LAT_MASK		0x3	/* sb latency */
#define	SBBC_MAX0_MASK		0xf0000	/* maxccntr0 */
#define	SBBC_MAX0_SHIFT		16
#define	SBBC_MAX1_MASK		0xf00000	/* maxccntr1 */
#define	SBBC_MAX1_SHIFT		20

/* sbbstate */
#define	SBBS_SRD		0x1	/* st reg disable */
#define	SBBS_HRD		0x2	/* hold reg disable */

/* sbidlow */
#define	SBIDL_CS_MASK		0x3	/* config space */
#define	SBIDL_AR_MASK		0x38	/* # address ranges supported */
#define	SBIDL_AR_SHIFT		3
#define	SBIDL_SYNCH		0x40	/* sync */
#define	SBIDL_INIT		0x80	/* initiator */
#define	SBIDL_MINLAT_MASK	0xf00	/* minimum backplane latency */
#define	SBIDL_MINLAT_SHIFT	8
#define	SBIDL_MAXLAT		0xf000	/* maximum backplane latency */
#define	SBIDL_MAXLAT_SHIFT	12
#define	SBIDL_FIRST		0x10000	/* this initiator is first */
#define	SBIDL_CW_MASK		0xc0000	/* cycle counter width */
#define	SBIDL_CW_SHIFT		18
#define	SBIDL_TP_MASK		0xf00000	/* target ports */
#define	SBIDL_TP_SHIFT		20
#define	SBIDL_IP_MASK		0xf000000	/* initiator ports */
#define	SBIDL_IP_SHIFT		24
#define	SBIDL_RV_MASK		0xf0000000	/* sonics backplane revision code */
#define	SBIDL_RV_SHIFT		28
#define	SBIDL_RV_2_2		0x00000000	/* version 2.2 or earlier */
#define	SBIDL_RV_2_3		0x10000000	/* version 2.3 */

/* sbidhigh */
#define	SBIDH_RC_MASK		0x000f	/* revision code */
#define	SBIDH_RCE_MASK		0x7000	/* revision code extension field */
#define	SBIDH_RCE_SHIFT		8
#define	SBCOREREV(sbidh) \
	((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
#define	SBIDH_CC_MASK		0x8ff0	/* core code */
#define	SBIDH_CC_SHIFT		4
#define	SBIDH_VC_MASK		0xffff0000	/* vendor code */
#define	SBIDH_VC_SHIFT		16

#define	SB_COMMIT		0xfd8	/* update buffered registers value */

/* vendor codes */
#define	SB_VEND_BCM		0x4243	/* Broadcom's SB vendor code */

#endif				/* _SBCONFIG_H */