Linux preempt-rt

Check our new training course

Real-Time Linux with PREEMPT_RT

Check our new training course
with Creative Commons CC-BY-SA
lecture and lab materials

Bootlin logo

Elixir Cross Referencer

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
/**
 *
 * GSPCA sub driver for W996[78]CF JPEG USB Dual Mode Camera Chip.
 *
 * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com>
 *
 * This module is adapted from the in kernel v4l1 w9968cf driver:
 *
 * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 */

/* Note this is not a stand alone driver, it gets included in ov519.c, this
   is a bit of a hack, but it needs the driver code for a lot of different
   ov sensors which is already present in ov519.c (the old v4l1 driver used
   the ovchipcam framework). When we have the time we really should move
   the sensor drivers to v4l2 sub drivers, and properly split of this
   driver from ov519.c */

/* The CONEX_CAM define for jpeg.h needs renaming, now its used here too */
#define CONEX_CAM
#include "jpeg.h"

#define W9968CF_I2C_BUS_DELAY    4 /* delay in us for I2C bit r/w operations */

#define Y_QUANTABLE (sd->jpeg_hdr + JPEG_QT0_OFFSET)
#define UV_QUANTABLE (sd->jpeg_hdr + JPEG_QT1_OFFSET)

static const struct v4l2_pix_format w9968cf_vga_mode[] = {
	{160, 120, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE,
		.bytesperline = 160 * 2,
		.sizeimage = 160 * 120 * 2,
		.colorspace = V4L2_COLORSPACE_JPEG},
	{176, 144, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE,
		.bytesperline = 176 * 2,
		.sizeimage = 176 * 144 * 2,
		.colorspace = V4L2_COLORSPACE_JPEG},
	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
		.bytesperline = 320 * 2,
		.sizeimage = 320 * 240 * 2,
		.colorspace = V4L2_COLORSPACE_JPEG},
	{352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
		.bytesperline = 352 * 2,
		.sizeimage = 352 * 288 * 2,
		.colorspace = V4L2_COLORSPACE_JPEG},
	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
		.bytesperline = 640 * 2,
		.sizeimage = 640 * 480 * 2,
		.colorspace = V4L2_COLORSPACE_JPEG},
};

static int reg_w(struct sd *sd, __u16 index, __u16 value);

/*--------------------------------------------------------------------------
  Write 64-bit data to the fast serial bus registers.
  Return 0 on success, -1 otherwise.
  --------------------------------------------------------------------------*/
static int w9968cf_write_fsb(struct sd *sd, u16* data)
{
	struct usb_device* udev = sd->gspca_dev.dev;
	u16 value;
	int ret;

	value = *data++;
	memcpy(sd->gspca_dev.usb_buf, data, 6);

	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
			      value, 0x06, sd->gspca_dev.usb_buf, 6, 500);
	if (ret < 0) {
		PDEBUG(D_ERR, "Write FSB registers failed (%d)", ret);
		return ret;
	}

	return 0;
}

/*--------------------------------------------------------------------------
  Write data to the serial bus control register.
  Return 0 on success, a negative number otherwise.
  --------------------------------------------------------------------------*/
static int w9968cf_write_sb(struct sd *sd, u16 value)
{
	int ret;

	/* We don't use reg_w here, as that would cause all writes when
	   bitbanging i2c to be logged, making the logs impossible to read */
	ret = usb_control_msg(sd->gspca_dev.dev,
		usb_sndctrlpipe(sd->gspca_dev.dev, 0),
		0,
		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
		value, 0x01, NULL, 0, 500);

	udelay(W9968CF_I2C_BUS_DELAY);

	if (ret < 0) {
		PDEBUG(D_ERR, "Write SB reg [01] %04x failed", value);
		return ret;
	}

	return 0;
}

/*--------------------------------------------------------------------------
  Read data from the serial bus control register.
  Return 0 on success, a negative number otherwise.
  --------------------------------------------------------------------------*/
static int w9968cf_read_sb(struct sd *sd)
{
	int ret;

	/* We don't use reg_r here, as the w9968cf is special and has 16
	   bit registers instead of 8 bit */
	ret = usb_control_msg(sd->gspca_dev.dev,
			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
			1,
			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
			0, 0x01, sd->gspca_dev.usb_buf, 2, 500);
	if (ret >= 0)
		ret = sd->gspca_dev.usb_buf[0] |
		      (sd->gspca_dev.usb_buf[1] << 8);
	else
		PDEBUG(D_ERR, "Read SB reg [01] failed");

	udelay(W9968CF_I2C_BUS_DELAY);

	return ret;
}

/*--------------------------------------------------------------------------
  Upload quantization tables for the JPEG compression.
  This function is called by w9968cf_start_transfer().
  Return 0 on success, a negative number otherwise.
  --------------------------------------------------------------------------*/
static int w9968cf_upload_quantizationtables(struct sd *sd)
{
	u16 a, b;
	int ret = 0, i, j;

	ret += reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */

	for (i = 0, j = 0; i < 32; i++, j += 2) {
		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
		b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
		ret += reg_w(sd, 0x40+i, a);
		ret += reg_w(sd, 0x60+i, b);
	}
	ret += reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */

	return ret;
}

/****************************************************************************
 * Low-level I2C I/O functions.                                             *
 * The adapter supports the following I2C transfer functions:               *
 * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only)           *
 * i2c_adap_read_byte_data()                                                *
 * i2c_adap_read_byte()                                                     *
 ****************************************************************************/

static int w9968cf_smbus_start(struct sd *sd)
{
	int ret = 0;

	ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
	ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */

	return ret;
}

static int w9968cf_smbus_stop(struct sd *sd)
{
	int ret = 0;

	ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
	ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */

	return ret;
}

static int w9968cf_smbus_write_byte(struct sd *sd, u8 v)
{
	u8 bit;
	int ret = 0, sda;

	for (bit = 0 ; bit < 8 ; bit++) {
		sda = (v & 0x80) ? 2 : 0;
		v <<= 1;
		/* SDE=1, SDA=sda, SCL=0 */
		ret += w9968cf_write_sb(sd, 0x10 | sda);
		/* SDE=1, SDA=sda, SCL=1 */
		ret += w9968cf_write_sb(sd, 0x11 | sda);
		/* SDE=1, SDA=sda, SCL=0 */
		ret += w9968cf_write_sb(sd, 0x10 | sda);
	}

	return ret;
}

static int w9968cf_smbus_read_byte(struct sd *sd, u8* v)
{
	u8 bit;
	int ret = 0;

	/* No need to ensure SDA is high as we are always called after
	   read_ack which ends with SDA high */
	*v = 0;
	for (bit = 0 ; bit < 8 ; bit++) {
		*v <<= 1;
		/* SDE=1, SDA=1, SCL=1 */
		ret += w9968cf_write_sb(sd, 0x0013);
		*v |= (w9968cf_read_sb(sd) & 0x0008) ? 1 : 0;
		/* SDE=1, SDA=1, SCL=0 */
		ret += w9968cf_write_sb(sd, 0x0012);
	}

	return ret;
}

static int w9968cf_smbus_write_nack(struct sd *sd)
{
	int ret = 0;

	/* No need to ensure SDA is high as we are always called after
	   read_byte which ends with SDA high */
	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */

	return ret;
}

static int w9968cf_smbus_read_ack(struct sd *sd)
{
	int ret = 0, sda;

	/* Ensure SDA is high before raising clock to avoid a spurious stop */
	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
	sda = w9968cf_read_sb(sd);
	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
	if (sda < 0)
		ret += sda;
	else if (sda & 0x08) {
		PDEBUG(D_USBI, "Did not receive i2c ACK");
		ret += -1;
	}

	return ret;
}

/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
{
	u16* data = (u16 *)sd->gspca_dev.usb_buf;
	int ret = 0;

	data[0] = 0x082f | ((sd->sensor_addr & 0x80) ? 0x1500 : 0x0);
	data[0] |= (sd->sensor_addr & 0x40) ? 0x4000 : 0x0;
	data[1] = 0x2082 | ((sd->sensor_addr & 0x40) ? 0x0005 : 0x0);
	data[1] |= (sd->sensor_addr & 0x20) ? 0x0150 : 0x0;
	data[1] |= (sd->sensor_addr & 0x10) ? 0x5400 : 0x0;
	data[2] = 0x8208 | ((sd->sensor_addr & 0x08) ? 0x0015 : 0x0);
	data[2] |= (sd->sensor_addr & 0x04) ? 0x0540 : 0x0;
	data[2] |= (sd->sensor_addr & 0x02) ? 0x5000 : 0x0;
	data[3] = 0x1d20 | ((sd->sensor_addr & 0x02) ? 0x0001 : 0x0);
	data[3] |= (sd->sensor_addr & 0x01) ? 0x0054 : 0x0;

	ret += w9968cf_write_fsb(sd, data);

	data[0] = 0x8208 | ((reg & 0x80) ? 0x0015 : 0x0);
	data[0] |= (reg & 0x40) ? 0x0540 : 0x0;
	data[0] |= (reg & 0x20) ? 0x5000 : 0x0;
	data[1] = 0x0820 | ((reg & 0x20) ? 0x0001 : 0x0);
	data[1] |= (reg & 0x10) ? 0x0054 : 0x0;
	data[1] |= (reg & 0x08) ? 0x1500 : 0x0;
	data[1] |= (reg & 0x04) ? 0x4000 : 0x0;
	data[2] = 0x2082 | ((reg & 0x04) ? 0x0005 : 0x0);
	data[2] |= (reg & 0x02) ? 0x0150 : 0x0;
	data[2] |= (reg & 0x01) ? 0x5400 : 0x0;
	data[3] = 0x001d;

	ret += w9968cf_write_fsb(sd, data);

	data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
	data[0] |= (value & 0x40) ? 0x0540 : 0x0;
	data[0] |= (value & 0x20) ? 0x5000 : 0x0;
	data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0);
	data[1] |= (value & 0x10) ? 0x0054 : 0x0;
	data[1] |= (value & 0x08) ? 0x1500 : 0x0;
	data[1] |= (value & 0x04) ? 0x4000 : 0x0;
	data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0);
	data[2] |= (value & 0x02) ? 0x0150 : 0x0;
	data[2] |= (value & 0x01) ? 0x5400 : 0x0;
	data[3] = 0xfe1d;

	ret += w9968cf_write_fsb(sd, data);

	if (!ret)
		PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
	else
		PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg);

	return ret;
}

/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
static int w9968cf_i2c_r(struct sd *sd, u8 reg)
{
	int ret = 0;
	u8 value;

	/* Fast serial bus data control disable */
	ret += w9968cf_write_sb(sd, 0x0013); /* don't change ! */

	ret += w9968cf_smbus_start(sd);
	ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr);
	ret += w9968cf_smbus_read_ack(sd);
	ret += w9968cf_smbus_write_byte(sd, reg);
	ret += w9968cf_smbus_read_ack(sd);
	ret += w9968cf_smbus_stop(sd);
	ret += w9968cf_smbus_start(sd);
	ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
	ret += w9968cf_smbus_read_ack(sd);
	ret += w9968cf_smbus_read_byte(sd, &value);
	/* signal we don't want to read anymore, the v4l1 driver used to
	   send an ack here which is very wrong! (and then fixed
	   the issues this gave by retrying reads) */
	ret += w9968cf_smbus_write_nack(sd);
	ret += w9968cf_smbus_stop(sd);

	/* Fast serial bus data control re-enable */
	ret += w9968cf_write_sb(sd, 0x0030);

	if (!ret) {
		ret = value;
		PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
	} else
		PDEBUG(D_ERR, "i2c read [0x%02x] failed", reg);

	return ret;
}


/*--------------------------------------------------------------------------
  Turn on the LED on some webcams. A beep should be heard too.
  Return 0 on success, a negative number otherwise.
  --------------------------------------------------------------------------*/
static int w9968cf_configure(struct sd *sd)
{
	int ret = 0;

	ret += reg_w(sd, 0x00, 0xff00); /* power-down */
	ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
	ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
	ret += reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
	ret += reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
	ret += reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
	ret += reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */

	if (ret)
		PDEBUG(D_ERR, "Couldn't turn on the LED");

	sd->stopped = 1;

	return ret;
}

static int w9968cf_init(struct sd *sd)
{
	int ret = 0;
	unsigned long hw_bufsize = sd->sif ? (352 * 288 * 2) : (640 * 480 * 2),
		      y0 = 0x0000,
		      u0 = y0 + hw_bufsize/2,
		      v0 = u0 + hw_bufsize/4,
		      y1 = v0 + hw_bufsize/4,
		      u1 = y1 + hw_bufsize/2,
		      v1 = u1 + hw_bufsize/4;

	ret += reg_w(sd, 0x00, 0xff00); /* power off */
	ret += reg_w(sd, 0x00, 0xbf10); /* power on */

	ret += reg_w(sd, 0x03, 0x405d); /* DRAM timings */
	ret += reg_w(sd, 0x04, 0x0030); /* SDRAM timings */

	ret += reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
	ret += reg_w(sd, 0x21, y0 >> 16);    /* Y buf.0, high */
	ret += reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
	ret += reg_w(sd, 0x25, u0 >> 16);    /* U buf.0, high */
	ret += reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
	ret += reg_w(sd, 0x29, v0 >> 16);    /* V buf.0, high */

	ret += reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
	ret += reg_w(sd, 0x23, y1 >> 16);    /* Y buf.1, high */
	ret += reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
	ret += reg_w(sd, 0x27, u1 >> 16);    /* U buf.1, high */
	ret += reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
	ret += reg_w(sd, 0x2b, v1 >> 16);    /* V buf.1, high */

	ret += reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
	ret += reg_w(sd, 0x33, y1 >> 16);    /* JPEG buf 0 high */

	ret += reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
	ret += reg_w(sd, 0x35, y1 >> 16);    /* JPEG bug 1 high */

	ret += reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
	ret += reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
	ret += reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
	ret += reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */

	return ret;
}

static int w9968cf_set_crop_window(struct sd *sd)
{
	int ret = 0, start_cropx, start_cropy,  x, y, fw, fh, cw, ch,
	    max_width, max_height;

	if (sd->sif) {
		max_width  = 352;
		max_height = 288;
	} else {
		max_width  = 640;
		max_height = 480;
	}

	if (sd->sensor == SEN_OV7620) {
		/* Sigh, this is dependend on the clock / framerate changes
		   made by the frequency control, sick. */
		if (sd->freq == 1) {
			start_cropx = 277;
			start_cropy = 37;
		} else {
			start_cropx = 105;
			start_cropy = 37;
		}
	} else {
		start_cropx = 320;
		start_cropy = 35;
	}

	/* Work around to avoid FP arithmetics */
	#define SC(x) ((x) << 10)

	/* Scaling factors */
	fw = SC(sd->gspca_dev.width) / max_width;
	fh = SC(sd->gspca_dev.height) / max_height;

	cw = (fw >= fh) ? max_width : SC(sd->gspca_dev.width)/fh;
	ch = (fw >= fh) ? SC(sd->gspca_dev.height)/fw : max_height;

	sd->sensor_width = max_width;
	sd->sensor_height = max_height;

	x = (max_width - cw) / 2;
	y = (max_height - ch) / 2;

	ret += reg_w(sd, 0x10, start_cropx + x);
	ret += reg_w(sd, 0x11, start_cropy + y);
	ret += reg_w(sd, 0x12, start_cropx + x + cw);
	ret += reg_w(sd, 0x13, start_cropy + y + ch);

	return ret;
}

static int w9968cf_mode_init_regs(struct sd *sd)
{
	int ret = 0, val, vs_polarity, hs_polarity;

	ret += w9968cf_set_crop_window(sd);

	ret += reg_w(sd, 0x14, sd->gspca_dev.width);
	ret += reg_w(sd, 0x15, sd->gspca_dev.height);

	/* JPEG width & height */
	ret += reg_w(sd, 0x30, sd->gspca_dev.width);
	ret += reg_w(sd, 0x31, sd->gspca_dev.height);

	/* Y & UV frame buffer strides (in WORD) */
	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
	    V4L2_PIX_FMT_JPEG) {
		ret += reg_w(sd, 0x2c, sd->gspca_dev.width/2);
		ret += reg_w(sd, 0x2d, sd->gspca_dev.width/4);
	} else
		ret += reg_w(sd, 0x2c, sd->gspca_dev.width);

	ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
	ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */

	/* Transfer size in WORDS (for UYVY format only) */
	val = sd->gspca_dev.width * sd->gspca_dev.height;
	ret += reg_w(sd, 0x3d, val & 0xffff); /* low bits */
	ret += reg_w(sd, 0x3e, val >> 16);    /* high bits */

	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
	    V4L2_PIX_FMT_JPEG) {
		/* We may get called multiple times (usb isoc bw negotiat.) */
		if (!sd->jpeg_hdr)
			sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
		if (!sd->jpeg_hdr)
			return -ENOMEM;

		jpeg_define(sd->jpeg_hdr, sd->gspca_dev.height,
			    sd->gspca_dev.width, 0x22); /* JPEG 420 */
		jpeg_set_qual(sd->jpeg_hdr, sd->quality);
		ret += w9968cf_upload_quantizationtables(sd);
	}

	/* Video Capture Control Register */
	if (sd->sensor == SEN_OV7620) {
		/* Seems to work around a bug in the image sensor */
		vs_polarity = 1;
		hs_polarity = 1;
	} else {
		vs_polarity = 1;
		hs_polarity = 0;
	}

	val = (vs_polarity << 12) | (hs_polarity << 11);

	/* NOTE: We may not have enough memory to do double buffering while
	   doing compression (amount of memory differs per model cam).
	   So we use the second image buffer also as jpeg stream buffer
	   (see w9968cf_init), and disable double buffering. */
	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
	    V4L2_PIX_FMT_JPEG) {
		/* val |= 0x0002; YUV422P */
		val |= 0x0003; /* YUV420P */
	} else
		val |= 0x0080; /* Enable HW double buffering */

	/* val |= 0x0020; enable clamping */
	/* val |= 0x0008; enable (1-2-1) filter */
	/* val |= 0x000c; enable (2-3-6-3-2) filter */

	val |= 0x8000; /* capt. enable */

	ret += reg_w(sd, 0x16, val);

	sd->gspca_dev.empty_packet = 0;

	return ret;
}

static void w9968cf_stop0(struct sd *sd)
{
	if (sd->gspca_dev.present) {
		reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
		reg_w(sd, 0x16, 0x0000); /* stop video capture */
	}

	kfree(sd->jpeg_hdr);
	sd->jpeg_hdr = NULL;
}

/* The w9968cf docs say that a 0 sized packet means EOF (and also SOF
   for the next frame). This seems to simply not be true when operating
   in JPEG mode, in this case there may be empty packets within the
   frame. So in JPEG mode use the JPEG SOI marker to detect SOF.

   Note to make things even more interesting the w9968cf sends *PLANAR* jpeg,
   to be precise it sends: SOI, SOF, DRI, SOS, Y-data, SOS, U-data, SOS,
   V-data, EOI. */
static void w9968cf_pkt_scan(struct gspca_dev *gspca_dev,
			u8 *data,			/* isoc packet */
			int len)			/* iso packet length */
{
	struct sd *sd = (struct sd *) gspca_dev;

	if (w9968cf_vga_mode[gspca_dev->curr_mode].pixelformat ==
	    V4L2_PIX_FMT_JPEG) {
		if (len >= 2 &&
		    data[0] == 0xff &&
		    data[1] == 0xd8) {
			gspca_frame_add(gspca_dev, LAST_PACKET,
					NULL, 0);
			gspca_frame_add(gspca_dev, FIRST_PACKET,
					sd->jpeg_hdr, JPEG_HDR_SZ);
			/* Strip the ff d8, our own header (which adds
			   huffman and quantization tables) already has this */
			len -= 2;
			data += 2;
		}
	} else {
		/* In UYVY mode an empty packet signals EOF */
		if (gspca_dev->empty_packet) {
			gspca_frame_add(gspca_dev, LAST_PACKET,
						NULL, 0);
			gspca_frame_add(gspca_dev, FIRST_PACKET,
					NULL, 0);
			gspca_dev->empty_packet = 0;
		}
	}
	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}