Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 | /*
* Driver for the s5k83a sensor
*
* Copyright (C) 2008 Erik Andrén
* Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
* Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
*
* Portions of code to USB interface and ALi driver software,
* Copyright (c) 2006 Willem Duinker
* v4l2 interface modeled after the V4L2 driver
* for SN9C10x PC Camera Controllers
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
*/
#ifndef M5602_S5K83A_H_
#define M5602_S5K83A_H_
#include "m5602_sensor.h"
#define S5K83A_FLIP 0x01
#define S5K83A_HFLIP_TUNE 0x03
#define S5K83A_VFLIP_TUNE 0x05
#define S5K83A_BRIGHTNESS 0x0a
#define S5K83A_EXPOSURE 0x18
#define S5K83A_GAIN 0x1b
#define S5K83A_PAGE_MAP 0xec
#define S5K83A_DEFAULT_GAIN 0x71
#define S5K83A_DEFAULT_BRIGHTNESS 0x7e
#define S5K83A_DEFAULT_EXPOSURE 0x00
#define S5K83A_MAXIMUM_EXPOSURE 0x3c
#define S5K83A_FLIP_MASK 0x10
#define S5K83A_GPIO_LED_MASK 0x10
#define S5K83A_GPIO_ROTATION_MASK 0x40
/*****************************************************************************/
/* Kernel module parameters */
extern int force_sensor;
extern int dump_sensor;
int s5k83a_probe(struct sd *sd);
int s5k83a_init(struct sd *sd);
int s5k83a_start(struct sd *sd);
int s5k83a_stop(struct sd *sd);
void s5k83a_disconnect(struct sd *sd);
static const struct m5602_sensor s5k83a = {
.name = "S5K83A",
.probe = s5k83a_probe,
.init = s5k83a_init,
.start = s5k83a_start,
.stop = s5k83a_stop,
.disconnect = s5k83a_disconnect,
.i2c_slave_id = 0x5a,
.i2c_regW = 2,
};
struct s5k83a_priv {
/* We use another thread periodically
probing the orientation of the camera */
struct task_struct *rotation_thread;
s32 *settings;
};
static const unsigned char preinit_s5k83a[][4] =
{
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00},
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00},
{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00},
};
/* This could probably be considerably shortened.
I don't have the hardware to experiment with it, patches welcome
*/
static const unsigned char init_s5k83a[][4] =
{
/* The following sequence is useless after a clean boot
but is necessary after resume from suspend */
{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00},
{SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00},
{SENSOR, 0xaf, 0x01, 0x00},
{SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00},
{SENSOR, 0x7b, 0xff, 0x00},
{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
{SENSOR, 0x01, 0x50, 0x00},
{SENSOR, 0x12, 0x20, 0x00},
{SENSOR, 0x17, 0x40, 0x00},
{SENSOR, 0x1c, 0x00, 0x00},
{SENSOR, 0x02, 0x70, 0x00},
{SENSOR, 0x03, 0x0b, 0x00},
{SENSOR, 0x04, 0xf0, 0x00},
{SENSOR, 0x05, 0x0b, 0x00},
{SENSOR, 0x06, 0x71, 0x00},
{SENSOR, 0x07, 0xe8, 0x00}, /* 488 */
{SENSOR, 0x08, 0x02, 0x00},
{SENSOR, 0x09, 0x88, 0x00}, /* 648 */
{SENSOR, 0x14, 0x00, 0x00},
{SENSOR, 0x15, 0x20, 0x00}, /* 32 */
{SENSOR, 0x19, 0x00, 0x00},
{SENSOR, 0x1a, 0x98, 0x00}, /* 152 */
{SENSOR, 0x0f, 0x02, 0x00},
{SENSOR, 0x10, 0xe5, 0x00}, /* 741 */
/* normal colors
(this is value after boot, but after tries can be different) */
{SENSOR, 0x00, 0x06, 0x00},
};
static const unsigned char start_s5k83a[][4] =
{
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, /* 484 */
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, /* 639 */
{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
};
#endif
|