Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 | /*
* Belkin USB Serial Adapter Driver
*
* Copyright (C) 2000
* William Greathouse (wgreathouse@smva.com)
*
* This program is largely derived from work by the linux-usb group
* and associated source files. Please see the usb/serial files for
* individual credits and copyrights.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
* TODO:
* -- Add true modem contol line query capability. Currently we track the
* states reported by the interrupt and the states we request.
* -- Add error reporting back to application for UART error conditions.
* Just point me at how to implement this and I'll do it. I've put the
* framework in, but haven't analyzed the "tty_flip" interface yet.
* -- Add support for flush commands
* -- Add everything that is missing :)
*
* (30-May-2001 gkh
* switched from using spinlock to a semaphore, which fixes lots of problems.
*
* 08-Apr-2001 gb
* - Identify version on module load.
*
* 12-Mar-2001 gkh
* - Added support for the GoHubs GO-COM232 device which is the same as the
* Peracom device.
*
* 06-Nov-2000 gkh
* - Added support for the old Belkin and Peracom devices.
* - Made the port able to be opened multiple times.
* - Added some defaults incase the line settings are things these devices
* can't support.
*
* 18-Oct-2000 William Greathouse
* Released into the wild (linux-usb-devel)
*
* 17-Oct-2000 William Greathouse
* Add code to recognize firmware version and set hardware flow control
* appropriately. Belkin states that firmware prior to 3.05 does not
* operate correctly in hardware handshake mode. I have verified this
* on firmware 2.05 -- for both RTS and DTR input flow control, the control
* line is not reset. The test performed by the Belkin Win* driver is
* to enable hardware flow control for firmware 2.06 or greater and
* for 1.00 or prior. I am only enabling for 2.06 or greater.
*
* 12-Oct-2000 William Greathouse
* First cut at supporting Belkin USB Serial Adapter F5U103
* I did not have a copy of the original work to support this
* adapter, so pardon any stupid mistakes. All of the information
* I am using to write this driver was acquired by using a modified
* UsbSnoop on Windows2000 and from examining the other USB drivers.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/fcntl.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#ifdef CONFIG_USB_SERIAL_DEBUG
static int debug = 1;
#else
static int debug;
#endif
#include "usb-serial.h"
#include "belkin_sa.h"
/*
* Version Information
*/
#define DRIVER_VERSION "v1.1"
#define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
#define DRIVER_DESC "USB Belkin Serial converter driver"
/* function prototypes for a Belkin USB Serial Adapter F5U103 */
static int belkin_sa_startup (struct usb_serial *serial);
static void belkin_sa_shutdown (struct usb_serial *serial);
static int belkin_sa_open (struct usb_serial_port *port, struct file *filp);
static void belkin_sa_close (struct usb_serial_port *port, struct file *filp);
static void belkin_sa_read_int_callback (struct urb *urb);
static void belkin_sa_set_termios (struct usb_serial_port *port, struct termios * old);
static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void belkin_sa_break_ctl (struct usb_serial_port *port, int break_state );
static __devinitdata struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id belkin_sa_table [] = {
{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id belkin_old_table [] = {
{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id peracom_table [] = {
{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id gocom232_table [] = {
{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
/* All of the device info needed for the Belkin serial converter */
struct usb_serial_device_type belkin_sa_device = {
name: "Belkin F5U103 USB Serial Adapter",
id_table: belkin_sa_table, /* the Belkin F5U103 device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
/* This driver also supports the "old" school Belkin single port adaptor */
struct usb_serial_device_type belkin_old_device = {
name: "Belkin USB Serial Adapter",
id_table: belkin_old_table, /* the old Belkin device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
/* this driver also works for the Peracom single port adapter */
struct usb_serial_device_type peracom_device = {
name: "Peracom single port USB Serial Adapter",
id_table: peracom_table, /* the Peracom device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
/* the GoHubs Go-COM232 device is the same as the Peracom single port adapter */
struct usb_serial_device_type gocom232_device = {
name: "GO-COM232 USB Serial Converter",
id_table: gocom232_table, /* the GO-COM232 device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
struct belkin_sa_private {
unsigned long control_state;
unsigned char last_lsr;
unsigned char last_msr;
int bad_flow_control;
};
/*
* ***************************************************************************
* Belkin USB Serial Adapter F5U103 specific driver functions
* ***************************************************************************
*/
#define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
/* assumes that struct usb_serial *serial is available */
#define BSA_USB_CMD(c,v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
(c), BELKIN_SA_SET_REQUEST_TYPE, \
(v), 0, NULL, 0, WDR_TIMEOUT)
/* do some startup allocations not currently performed by usb_serial_probe() */
static int belkin_sa_startup (struct usb_serial *serial)
{
struct usb_device *dev = serial->dev;
struct belkin_sa_private *priv;
/* allocate the private data structure */
serial->port->private = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
if (!serial->port->private)
return (-1); /* error */
priv = (struct belkin_sa_private *)serial->port->private;
/* set initial values for control structures */
priv->control_state = 0;
priv->last_lsr = 0;
priv->last_msr = 0;
/* see comments at top of file */
priv->bad_flow_control = (dev->descriptor.bcdDevice <= 0x0206) ? 1 : 0;
info("bcdDevice: %04x, bfc: %d", dev->descriptor.bcdDevice, priv->bad_flow_control);
init_waitqueue_head(&serial->port->write_wait);
return (0);
}
static void belkin_sa_shutdown (struct usb_serial *serial)
{
int i;
dbg (__FUNCTION__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
while (serial->port[i].open_count > 0) {
belkin_sa_close (&serial->port[i], NULL);
}
/* My special items, the standard routines free my urbs */
if (serial->port[i].private)
kfree(serial->port[i].private);
}
}
static int belkin_sa_open (struct usb_serial_port *port, struct file *filp)
{
int retval = 0;
dbg(__FUNCTION__" port %d", port->number);
down (&port->sem);
++port->open_count;
MOD_INC_USE_COUNT;
if (!port->active) {
port->active = 1;
/*Start reading from the device*/
/* TODO: Look at possibility of submitting mulitple URBs to device to
* enhance buffering. Win trace shows 16 initial read URBs.
*/
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb);
if (retval) {
err("usb_submit_urb(read bulk) failed");
goto exit;
}
port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->interrupt_in_urb);
if (retval)
err(" usb_submit_urb(read int) failed");
}
exit:
up (&port->sem);
return retval;
} /* belkin_sa_open */
static void belkin_sa_close (struct usb_serial_port *port, struct file *filp)
{
dbg(__FUNCTION__" port %d", port->number);
down (&port->sem);
--port->open_count;
if (port->open_count <= 0) {
/* shutdown our bulk reads and writes */
usb_unlink_urb (port->write_urb);
usb_unlink_urb (port->read_urb);
usb_unlink_urb (port->interrupt_in_urb); /* wgg - do I need this? I think so. */
port->active = 0;
}
up (&port->sem);
MOD_DEC_USE_COUNT;
} /* belkin_sa_close */
static void belkin_sa_read_int_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct belkin_sa_private *priv = (struct belkin_sa_private *)port->private;
struct usb_serial *serial;
unsigned char *data = urb->transfer_buffer;
/* the urb might have been killed. */
if (urb->status)
return;
if (port_paranoia_check (port, "belkin_sa_read_interrupt")) return;
serial = port->serial;
if (serial_paranoia_check (serial, "belkin_sa_read_interrupt")) return;
usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
/* Handle known interrupt data */
/* ignore data[0] and data[1] */
priv->last_msr = data[BELKIN_SA_MSR_INDEX];
/* Record Control Line states */
if (priv->last_msr & BELKIN_SA_MSR_DSR)
priv->control_state |= TIOCM_DSR;
else
priv->control_state &= ~TIOCM_DSR;
if (priv->last_msr & BELKIN_SA_MSR_CTS)
priv->control_state |= TIOCM_CTS;
else
priv->control_state &= ~TIOCM_CTS;
if (priv->last_msr & BELKIN_SA_MSR_RI)
priv->control_state |= TIOCM_RI;
else
priv->control_state &= ~TIOCM_RI;
if (priv->last_msr & BELKIN_SA_MSR_CD)
priv->control_state |= TIOCM_CD;
else
priv->control_state &= ~TIOCM_CD;
/* Now to report any errors */
priv->last_lsr = data[BELKIN_SA_LSR_INDEX];
#if 0
/*
* fill in the flip buffer here, but I do not know the relation
* to the current/next receive buffer or characters. I need
* to look in to this before committing any code.
*/
if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
tty = port->tty;
/* Overrun Error */
if (priv->last_lsr & BELKIN_SA_LSR_OE) {
}
/* Parity Error */
if (priv->last_lsr & BELKIN_SA_LSR_PE) {
}
/* Framing Error */
if (priv->last_lsr & BELKIN_SA_LSR_FE) {
}
/* Break Indicator */
if (priv->last_lsr & BELKIN_SA_LSR_BI) {
}
}
#endif
/* INT urbs are automatically re-submitted */
}
static void belkin_sa_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{
struct usb_serial *serial = port->serial;
struct belkin_sa_private *priv = (struct belkin_sa_private *)port->private;
unsigned int iflag = port->tty->termios->c_iflag;
unsigned int cflag = port->tty->termios->c_cflag;
unsigned int old_iflag = old_termios->c_iflag;
unsigned int old_cflag = old_termios->c_cflag;
__u16 urb_value = 0; /* Will hold the new flags */
/* Set the baud rate */
if( (cflag&CBAUD) != (old_cflag&CBAUD) ) {
/* reassert DTR and (maybe) RTS on transition from B0 */
if( (old_cflag&CBAUD) == B0 ) {
priv->control_state |= (TIOCM_DTR|TIOCM_RTS);
if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
err("Set DTR error");
/* don't set RTS if using hardware flow control */
if (!(old_cflag&CRTSCTS) )
if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 1) < 0)
err("Set RTS error");
}
switch(cflag & CBAUD) {
case B0: /* handled below */ break;
case B300: urb_value = BELKIN_SA_BAUD(300); break;
case B600: urb_value = BELKIN_SA_BAUD(600); break;
case B1200: urb_value = BELKIN_SA_BAUD(1200); break;
case B2400: urb_value = BELKIN_SA_BAUD(2400); break;
case B4800: urb_value = BELKIN_SA_BAUD(4800); break;
case B9600: urb_value = BELKIN_SA_BAUD(9600); break;
case B19200: urb_value = BELKIN_SA_BAUD(19200); break;
case B38400: urb_value = BELKIN_SA_BAUD(38400); break;
case B57600: urb_value = BELKIN_SA_BAUD(57600); break;
case B115200: urb_value = BELKIN_SA_BAUD(115200); break;
case B230400: urb_value = BELKIN_SA_BAUD(230400); break;
default: err("BELKIN USB Serial Adapter: unsupported baudrate request, using default of 9600");
urb_value = BELKIN_SA_BAUD(9600); break;
}
if ((cflag & CBAUD) != B0 ) {
if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
err("Set baudrate error");
} else {
/* Disable flow control */
if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, BELKIN_SA_FLOW_NONE) < 0)
err("Disable flowcontrol error");
/* Drop RTS and DTR */
priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
err("DTR LOW error");
if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
err("RTS LOW error");
}
}
/* set the parity */
if( (cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD)) ) {
if (cflag & PARENB)
urb_value = (cflag & PARODD) ? BELKIN_SA_PARITY_ODD : BELKIN_SA_PARITY_EVEN;
else
urb_value = BELKIN_SA_PARITY_NONE;
if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
err("Set parity error");
}
/* set the number of data bits */
if( (cflag&CSIZE) != (old_cflag&CSIZE) ) {
switch (cflag & CSIZE) {
case CS5: urb_value = BELKIN_SA_DATA_BITS(5); break;
case CS6: urb_value = BELKIN_SA_DATA_BITS(6); break;
case CS7: urb_value = BELKIN_SA_DATA_BITS(7); break;
case CS8: urb_value = BELKIN_SA_DATA_BITS(8); break;
default: err("CSIZE was not CS5-CS8, using default of 8");
urb_value = BELKIN_SA_DATA_BITS(8);
break;
}
if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
err("Set data bits error");
}
/* set the number of stop bits */
if( (cflag&CSTOPB) != (old_cflag&CSTOPB) ) {
urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2) : BELKIN_SA_STOP_BITS(1);
if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST, urb_value) < 0)
err("Set stop bits error");
}
/* Set flow control */
if( (iflag&IXOFF) != (old_iflag&IXOFF)
|| (iflag&IXON) != (old_iflag&IXON)
|| (cflag&CRTSCTS) != (old_cflag&CRTSCTS) ) {
urb_value = 0;
if ((iflag & IXOFF) || (iflag & IXON))
urb_value |= (BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
else
urb_value &= ~(BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
if (cflag & CRTSCTS)
urb_value |= (BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);
else
urb_value &= ~(BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);
if (priv->bad_flow_control)
urb_value &= ~(BELKIN_SA_FLOW_IRTS);
if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
err("Set flow control error");
}
} /* belkin_sa_set_termios */
static void belkin_sa_break_ctl( struct usb_serial_port *port, int break_state )
{
struct usb_serial *serial = port->serial;
if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
err("Set break_ctl %d", break_state);
}
static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
struct usb_serial *serial = port->serial;
__u16 urb_value; /* Will hold the new flags */
struct belkin_sa_private *priv = (struct belkin_sa_private *)port->private;
int ret, mask;
/* Based on code from acm.c and others */
switch (cmd) {
case TIOCMGET:
return put_user(priv->control_state, (unsigned long *) arg);
break;
case TIOCMSET: /* Turns on and off the lines as specified by the mask */
case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */
case TIOCMBIC: /* turns off (Clears) the lines as specified by the mask */
if ((ret = get_user(mask, (unsigned long *) arg))) return ret;
if ((cmd == TIOCMSET) || (mask & TIOCM_RTS)) {
/* RTS needs set */
urb_value = ((cmd == TIOCMSET) && (mask & TIOCM_RTS)) || (cmd == TIOCMBIS) ? 1 : 0;
if (urb_value)
priv->control_state |= TIOCM_RTS;
else
priv->control_state &= ~TIOCM_RTS;
if ((ret = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, urb_value)) < 0) {
err("Set RTS error %d", ret);
return(ret);
}
}
if ((cmd == TIOCMSET) || (mask & TIOCM_DTR)) {
/* DTR needs set */
urb_value = ((cmd == TIOCMSET) && (mask & TIOCM_DTR)) || (cmd == TIOCMBIS) ? 1 : 0;
if (urb_value)
priv->control_state |= TIOCM_DTR;
else
priv->control_state &= ~TIOCM_DTR;
if ((ret = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, urb_value)) < 0) {
err("Set DTR error %d", ret);
return(ret);
}
}
break;
case TIOCMIWAIT:
/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
/* TODO */
return( 0 );
case TIOCGICOUNT:
/* return count of modemline transitions */
/* TODO */
return 0;
default:
dbg("belkin_sa_ioctl arg not supported - 0x%04x",cmd);
return(-ENOIOCTLCMD);
break;
}
return 0;
} /* belkin_sa_ioctl */
static int __init belkin_sa_init (void)
{
usb_serial_register (&belkin_sa_device);
usb_serial_register (&belkin_old_device);
usb_serial_register (&peracom_device);
usb_serial_register (&gocom232_device);
info(DRIVER_VERSION ":" DRIVER_DESC);
return 0;
}
static void __exit belkin_sa_exit (void)
{
usb_serial_deregister (&belkin_sa_device);
usb_serial_deregister (&belkin_old_device);
usb_serial_deregister (&peracom_device);
usb_serial_deregister (&gocom232_device);
}
module_init (belkin_sa_init);
module_exit (belkin_sa_exit);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_PARM(debug, "i");
MODULE_PARM_DESC(debug, "Debug enabled or not");
|