Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 | /*
* $Id: via82cxxx.c,v 3.20 2001/01/27 10:13:60 vojtech Exp $
*
* Copyright (c) 2000-2001 Vojtech Pavlik
*
* Based on the work of:
* Michel Aubry
* Jeff Garzik
* Andre Hedrick
*
* Sponsored by SuSE
*/
/*
* VIA IDE driver for Linux. Supports
*
* vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
* vt82c686, vt82c686a, vt82c686b, vt8231, vt8233
*
* southbridges, which can be found in
*
* VIA Apollo VP, VPX, VPX/97, VP2, VP2/97, VP3, MVP3, MVP4, P6, Pro,
* Pro Plus, Pro 133, Pro 133A, ProMedia PM601, ProSavage PM133, PLE133,
* Pro 266, KX133, KT133, ProSavage KM133, KT133A, KT266
* PC-Chips VXPro, VXPro+, TXPro-III, TXPro-AGP, ViaGra, BXToo, BXTel
* AMD 640, 640 AGP, 750 IronGate
* ETEQ 6618, 6628, 6638
* Micron Samurai
*
* chipsets. Supports
*
* PIO 0-5, MWDMA 0-2, SWDMA 0-2 and UDMA 0-5
*
* (this includes UDMA33, 66 and 100) modes. UDMA66 and higher modes are
* autodetected only in case the BIOS has detected a 80 wire cable. To ignore
* the BIOS data, use 'ide0=ata66' or 'ide1=ata66' on the kernel command line.
*
* For correct operation it's needed to tell the driver the speed of the PCI
* bus. The default, and most common value is 33 MHz. Most likely, your system
* is using this value and you don't need to use any command line options. If
* you run your PCI bus speed at 25, 30, 37, 40 or 42 MHz, use the 'idebus=xx'
* option of the IDE driver. Note that this has nothing to do with UDMA66.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
* Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/io.h>
#include "ide-timing.h"
#define VIA_IDE_ENABLE 0x40
#define VIA_IDE_CONFIG 0x41
#define VIA_FIFO_CONFIG 0x43
#define VIA_MISC_1 0x44
#define VIA_MISC_2 0x45
#define VIA_MISC_3 0x46
#define VIA_DRIVE_TIMING 0x48
#define VIA_8BIT_TIMING 0x4e
#define VIA_ADDRESS_SETUP 0x4c
#define VIA_UDMA_TIMING 0x50
#define VIA_UDMA 0x07
#define VIA_UDMA_NONE 0x00
#define VIA_UDMA_33 0x01
#define VIA_UDMA_66 0x02
#define VIA_UDMA_100 0x03
#define VIA_BAD_PREQ 0x10
#define VIA_BAD_CLK66 0x20
#define VIA_SET_FIFO 0x40
#define VIA_SET_THRESH 0x80
/*
* VIA SouthBridge chips.
*/
static struct via_isa_bridge {
char *name;
unsigned short id;
unsigned char rev_min;
unsigned char rev_max;
unsigned char flags;
} via_isa_bridges[] = {
{ "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 },
{ "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_66 },
{ "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 },
{ "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 },
{ "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_66 },
{ "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 },
{ "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
{ "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
{ "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
{ "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
{ "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
{ NULL }
};
static struct via_isa_bridge *via_config;
static unsigned char via_enabled;
static unsigned int via_80w;
static unsigned int via_clock;
/*
* VIA /proc entry.
*/
#ifdef CONFIG_PROC_FS
#include <linux/stat.h>
#include <linux/proc_fs.h>
int via_proc, via_base;
static struct pci_dev *bmide_dev, *isa_dev;
extern int (*via_display_info)(char *, char **, off_t, int); /* ide-proc.c */
static char *via_control3[] = { "No limit", "64", "128", "192" };
#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg)
#define via_print_drive(name, format, arg...)\
p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n");
static int via_get_info(char *buffer, char **addr, off_t offset, int count)
{
short speed[4], cycle[4], setup[4], active[4],
recover[4], uen[4], udma[4], active8b[4], recover8b[4];
struct pci_dev *dev = bmide_dev;
unsigned int v, u, i;
unsigned short c, w;
unsigned char t, x;
char *p = buffer;
via_print("----------VIA BusMastering IDE Configuration----------------");
via_print("Driver Version: 3.20");
via_print("South Bridge: VIA %s", via_config->name);
pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t);
pci_read_config_byte(dev, PCI_REVISION_ID, &x);
via_print("Revision: ISA %#x IDE %#x", t, x);
via_print("BM-DMA base: %#x", via_base);
via_print("PCI clock: %dMHz", via_clock);
pci_read_config_byte(dev, VIA_MISC_1, &t);
via_print("Master Read Cycle IRDY: %dws", (t & 64) >> 6);
via_print("Master Write Cycle IRDY: %dws", (t & 32) >> 5);
via_print("BM IDE Status Register Read Retry: %s", (t & 8) ? "yes" : "no");
pci_read_config_byte(dev, VIA_MISC_3, &t);
via_print("Max DRDY Pulse Width: %s%s", via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : "");
via_print("-----------------------Primary IDE-------Secondary IDE------");
via_print("Read DMA FIFO flush: %10s%20s", (t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no");
via_print("End Sector FIFO flush: %10s%20s", (t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
pci_read_config_byte(dev, VIA_IDE_CONFIG, &t);
via_print("Prefetch Buffer: %10s%20s", (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no");
via_print("Post Write Buffer: %10s%20s", (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
pci_read_config_byte(dev, VIA_IDE_ENABLE, &t);
via_print("Enabled: %10s%20s", (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no");
c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8);
via_print("Simplex only: %10s%20s", (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no");
via_print("Cable Type: %10s%20s", (via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w");
via_print("-------------------drive0----drive1----drive2----drive3-----");
pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v);
pci_read_config_word(dev, VIA_8BIT_TIMING, &w);
if (via_config->flags & VIA_UDMA)
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
else u = 0;
for (i = 0; i < 4; i++) {
setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1;
recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1;
active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1;
active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1;
recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1;
udma[i] = ((u >> ((3 - i) << 3)) & 0x7) + 2;
if ((via_config->flags & VIA_UDMA) == VIA_UDMA_100) {
speed[i] = 2000 / udma[i];
cycle[i] = 10 * udma[i];
continue;
}
uen[i] = (u >> ((3 - i) << 3)) & 0x20;
udma[i] *= ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2;
speed[i] = 40 * via_clock / (uen[i] ? udma[i] : (active[i] + recover[i]) * 2);
cycle[i] = 1000 / via_clock * (uen[i] ? udma[i] : (active[i] + recover[i]) * 2) / 2;
}
via_print_drive("Transfer Mode: ", "%10s",
(c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)) ? (uen[i] ? "UDMA" : "DMA") : "PIO");
via_print_drive("Address Setup: ", "%8dns", (1000 / via_clock) * setup[i]);
via_print_drive("Cmd Active: ", "%8dns", (1000 / via_clock) * active8b[i]);
via_print_drive("Cmd Recovery: ", "%8dns", (1000 / via_clock) * recover8b[i]);
via_print_drive("Data Active: ", "%8dns", (1000 / via_clock) * active[i]);
via_print_drive("Data Recovery: ", "%8dns", (1000 / via_clock) * recover[i]);
via_print_drive("Cycle Time: ", "%8dns", cycle[i]);
via_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 10, speed[i] % 10);
return p - buffer; /* hoping it is less than 4K... */
}
#endif
/*
* via_set_speed() writes timing values to the chipset registers
*/
static void via_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing)
{
unsigned char t;
pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
switch (via_config->flags & VIA_UDMA) {
case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
default: return;
}
pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
}
/*
* via_set_drive() computes timing values configures the drive and
* the chipset to a desired transfer mode. It also can be called
* by upper layers.
*/
static int via_set_drive(ide_drive_t *drive, unsigned char speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct ide_timing t, p;
int T, UT;
if (speed != XFER_PIO_SLOW && speed != drive->current_speed)
if (ide_config_drive_speed(drive, speed))
printk(KERN_WARNING "ide%d: Drive %d didn't accept speed setting. Oh, well.\n",
drive->dn >> 1, drive->dn & 1);
T = 1000 / via_clock;
switch (via_config->flags & VIA_UDMA) {
case VIA_UDMA_33: UT = T; break;
case VIA_UDMA_66: UT = T/2; break;
case VIA_UDMA_100: UT = 10; break;
default: UT = T; break;
}
ide_timing_compute(drive, speed, &t, T, UT);
if (peer->present) {
ide_timing_compute(peer, peer->current_speed, &p, T, UT);
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
}
via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
if (!drive->init_speed)
drive->init_speed = speed;
drive->current_speed = speed;
return 0;
}
/*
* via82cxxx_tune_drive() is a callback from upper layers for
* PIO-only tuning.
*/
static void via82cxxx_tune_drive(ide_drive_t *drive, unsigned char pio)
{
if (!((via_enabled >> HWIF(drive)->channel) & 1))
return;
if (pio == 255) {
via_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
return;
}
via_set_drive(drive, XFER_PIO_0 + MIN(pio, 5));
}
#ifdef CONFIG_BLK_DEV_IDEDMA
/*
* via82cxxx_dmaproc() is a callback from upper layers that can do
* a lot, but we use it for DMA/PIO tuning only, delegating everything
* else to the default ide_dmaproc().
*/
int via82cxxx_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
{
if (func == ide_dma_check) {
short w80 = HWIF(drive)->udma_four;
short speed = ide_find_best_mode(drive,
XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
(via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
(w80 && (via_config->flags & VIA_UDMA) == VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
(w80 && (via_config->flags & VIA_UDMA) == VIA_UDMA_100 ? XFER_UDMA_100 : 0));
func = ((speed & XFER_MODE) != XFER_PIO) ? ide_dma_on : ide_dma_off_quietly;
via_set_drive(drive, speed);
}
return ide_dmaproc(func, drive);
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
/*
* The initialization callback. Here we determine the IDE chip type
* and initialize its drive independent registers.
*/
unsigned int __init pci_init_via82cxxx(struct pci_dev *dev, const char *name)
{
struct pci_dev *isa = NULL;
unsigned char t, v;
unsigned int u;
int i;
/*
* Find the ISA bridge to see how good the IDE is.
*/
for (via_config = via_isa_bridges; via_config->id; via_config++)
if ((isa = pci_find_device(PCI_VENDOR_ID_VIA, via_config->id, NULL))) {
pci_read_config_byte(isa, PCI_REVISION_ID, &t);
if (t >= via_config->rev_min && t <= via_config->rev_max)
break;
}
if (!via_config->id) {
printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <vojtech@suse.cz>\n");
return -ENODEV;
}
/*
* Check 80-wire cable presence and setup Clk66.
*/
switch (via_config->flags & VIA_UDMA) {
case VIA_UDMA_100:
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 0x10) || (((u >> i) & 0x20) && (((u >> i) & 7) < 3)))
via_80w |= (1 << (1 - (i >> 4))); /* BIOS 80-wire bit or UDMA w/ < 50ns/cycle */
break;
case VIA_UDMA_66:
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); /* Enable Clk66 */
pci_write_config_dword(dev, VIA_UDMA_TIMING, u | 0x80008);
for (i = 24; i >= 0; i -= 8)
if (((u >> (i & 16)) & 8) && ((u >> i) & 0x20) && (((u >> i) & 7) < 2))
via_80w |= (1 << (1 - (i >> 4))); /* 2x PCI clock and UDMA w/ < 3T/cycle */
break;
}
if (via_config->flags & VIA_BAD_CLK66) { /* Disable Clk66 */
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); /* Would cause trouble on 596a */
pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
}
/*
* Check whether interfaces are enabled.
*/
pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
via_enabled = ((v & 1) ? 2 : 0) | ((v & 2) ? 1 : 0);
/*
* Set up FIFO sizes and thresholds.
*/
pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
if (via_config->flags & VIA_BAD_PREQ) /* Disable PREQ# till DDACK# */
t &= 0x7f; /* Would crash on 586b rev 41 */
if (via_config->flags & VIA_SET_FIFO) { /* Fix FIFO split between channels */
t &= (t & 0x9f);
switch (via_enabled) {
case 1: t |= 0x00; break; /* 16 on primary */
case 2: t |= 0x60; break; /* 16 on secondary */
case 3: t |= 0x20; break; /* 8 pri 8 sec */
}
}
if (via_config->flags & VIA_SET_THRESH) /* 1/2 FIFO full to trigger xmit */
t = (t & 0xf0) | 0x0a;
pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
/*
* Determine system bus clock.
*/
via_clock = system_bus_clock();
if (via_clock < 20 || via_clock > 50) {
printk(KERN_WARNING "VP_IDE: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", via_clock);
printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want to force UDMA66/UDMA100.\n");
via_clock = 33;
}
/*
* Print the boot message.
*/
pci_read_config_byte(isa, PCI_REVISION_ID, &t);
printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %s controller on pci%s\n",
via_config->name, t,
(via_config->flags & VIA_UDMA) == VIA_UDMA_100 ? "UDMA100" :
(via_config->flags & VIA_UDMA) == VIA_UDMA_66 ? "UDMA66" :
(via_config->flags & VIA_UDMA) == VIA_UDMA_33 ? "UDMA33" : "MWDMA16",
dev->slot_name);
/*
* Setup /proc/ide/via entry.
*/
#ifdef CONFIG_PROC_FS
if (!via_proc) {
via_proc = 1;
via_base = pci_resource_start(dev, 4);
bmide_dev = dev;
isa_dev = isa;
via_display_info = &via_get_info;
}
#endif
return 0;
}
unsigned int __init ata66_via82cxxx(ide_hwif_t *hwif)
{
return ((via_enabled & via_80w) >> hwif->channel) & 1;
}
void __init ide_init_via82cxxx(ide_hwif_t *hwif)
{
int i;
hwif->tuneproc = &via82cxxx_tune_drive;
hwif->speedproc = &via_set_drive;
hwif->autodma = 0;
for (i = 0; i < 2; i++) {
hwif->drives[i].io_32bit = 1;
hwif->drives[i].unmask = 1;
hwif->drives[i].autotune = 1;
hwif->drives[i].dn = hwif->channel * 2 + i;
}
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->dmaproc = &via82cxxx_dmaproc;
#ifdef CONFIG_IDEDMA_AUTO
hwif->autodma = 1;
#endif
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
}
/*
* We allow the BM-DMA driver to only work on enabled interfaces.
*/
void __init ide_dmacapable_via82cxxx(ide_hwif_t *hwif, unsigned long dmabase)
{
if ((via_enabled >> hwif->channel) & 1)
ide_setup_dma(hwif, dmabase, 8);
}
|