Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 | #define DISABLED_OPTIONS 0
/*
* sound/configure.c - Configuration program for the Linux Sound Driver
*
* Copyright by Hannu Savolainen 1993
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer. 2.
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <stdio.h>
#define B(x) (1 << (x))
/*
* Option numbers
*/
#define OPT_PAS 0
#define OPT_SB 1
#define OPT_ADLIB 2
#define OPT_LAST_MUTUAL 2
#define OPT_GUS 3
#define OPT_MPU401 4
#define OPT_UART6850 5
#define OPT_PSS 6
#define OPT_GUS16 7
#define OPT_GUSMAX 8
#define OPT_MSS 9
#define OPT_SSCAPE 10
#define OPT_TRIX 11
#define OPT_MAD16 12
#define OPT_HIGHLEVEL 13 /* This must be same than the next one */
#define OPT_SBPRO 13
#define OPT_SB16 14
#define OPT_AEDSP16 15
#define OPT_AUDIO 16
#define OPT_MIDI_AUTO 17
#define OPT_MIDI 18
#define OPT_YM3812_AUTO 19
#define OPT_YM3812 20
#define OPT_SEQUENCER 21
#define OPT_LAST 21 /* Last defined OPT number */
#define ANY_DEVS (B(OPT_AUDIO)|B(OPT_MIDI)|B(OPT_SEQUENCER)|B(OPT_GUS)| \
B(OPT_MPU401)|B(OPT_PSS)|B(OPT_GUS16)|B(OPT_GUSMAX)| \
B(OPT_MSS)|B(OPT_SSCAPE)|B(OPT_UART6850)|B(OPT_TRIX)| \
B(OPT_MAD16))
#define AUDIO_CARDS (B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_GUS) | \
B (OPT_MSS) | B (OPT_GUS16) | B (OPT_GUSMAX) | B (OPT_TRIX) | \
B (OPT_SSCAPE)| B(OPT_MAD16))
#define MIDI_CARDS (B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_MPU401) | \
B (OPT_GUS) | B (OPT_TRIX) | B (OPT_SSCAPE)|B(OPT_MAD16))
/*
* Options that have been disabled for some reason (incompletely implemented
* and/or tested). Don't remove from this list before looking at file
* experimental.txt for further info.
*/
typedef struct
{
unsigned long conditions;
unsigned long exclusive_options;
char macro[20];
int verify;
int alias;
int default_answ;
}
hw_entry;
/*
* The rule table for the driver options. The first field defines a set of
* options which must be selected before this entry can be selected. The
* second field is a set of options which are not allowed with this one. If
* the fourth field is zero, the option is selected without asking
* confirmation from the user.
*
* With this version of the rule table it is possible to select just one type of
* hardware.
*
* NOTE! Keep the following table and the questions array in sync with the
* option numbering!
*/
hw_entry hw_table[] =
{
/*
* 0
*/
{0, 0, "PAS", 1, 0, 0},
{0, 0, "SB", 1, 0, 0},
{0, B (OPT_PAS) | B (OPT_SB), "ADLIB", 1, 0, 0},
{0, 0, "GUS", 1, 0, 0},
{0, 0, "MPU401", 1, 0, 0},
{0, 0, "UART6850", 1, 0, 0},
{0, 0, "PSS", 1, 0, 0},
{B (OPT_GUS), 0, "GUS16", 1, 0, 0},
{B (OPT_GUS), B (OPT_GUS16), "GUSMAX", 1, 0, 0},
{0, 0, "MSS", 1, 0, 0},
{0, 0, "SSCAPE", 1, 0, 0},
{0, 0, "TRIX", 1, 0, 0},
{0, 0, "MAD16", 1, 0, 0},
{B (OPT_SB), B (OPT_PAS), "SBPRO", 1, 0, 1},
{B (OPT_SB) | B (OPT_SBPRO), B (OPT_PAS), "SB16", 1, 0, 1},
{B (OPT_SBPRO) | B (OPT_MSS) | B (OPT_MPU401), 0, "AEDSP16", 1, 0, 0},
{AUDIO_CARDS, 0, "AUDIO", 1, 0, 1},
{B (OPT_MPU401), 0, "MIDI_AUTO", 0, OPT_MIDI, 0},
{MIDI_CARDS, 0, "MIDI", 1, 0, 1},
{B (OPT_ADLIB), 0, "YM3812_AUTO", 0, OPT_YM3812, 0},
{B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_ADLIB) | B (OPT_MSS) | B (OPT_PSS), B (OPT_YM3812_AUTO), "YM3812", 1, 0, 1},
{B (OPT_MIDI) | B (OPT_YM3812) | B (OPT_YM3812_AUTO) | B (OPT_GUS), 0, "SEQUENCER", 0, 0, 1}
};
char *questions[] =
{
"ProAudioSpectrum 16 support",
"SoundBlaster support",
"Generic OPL2/OPL3 FM synthesizer support",
"Gravis Ultrasound support",
"MPU-401 support (NOT for SB16)",
"6850 UART Midi support",
"PSS (ECHO-ADI2111) support",
"16 bit sampling option of GUS (_NOT_ GUS MAX)",
"GUS MAX support",
"Microsoft Sound System support",
"Ensoniq Soundscape support",
"MediaTriX AudioTriX Pro support",
"Support for MAD16 and/or Mozart based cards",
"SoundBlaster Pro support",
"SoundBlaster 16 support",
"Audio Excel DSP 16 initialization support",
"/dev/dsp and /dev/audio supports (usually required)",
"This should not be asked",
"MIDI interface support",
"This should not be asked",
"FM synthesizer (YM3812/OPL-3) support",
"/dev/sequencer support",
"Is the sky really falling"
};
unsigned long selected_options = 0;
int sb_dma = 0;
#include "hex2hex.h"
int bin2hex (char *path, char *target, char *varname);
int
can_select_option (int nr)
{
#if 0
switch (nr)
{
case 0:
fprintf (stderr, "The SoundBlaster, AdLib and ProAudioSpectrum\n"
"CARDS cannot be installed at the same time.\n\n"
"However the PAS16 has a SB emulator so you could select"
"the SoundBlaster DRIVER with it.\n");
fprintf (stderr, " - ProAudioSpectrum 16\n");
fprintf (stderr, " - SoundBlaster / SB Pro\n");
fprintf (stderr, " (Could be selected with a PAS16 also)\n");
fprintf (stderr, " - AdLib\n");
fprintf (stderr, "\nDon't enable SoundBlaster if you have GUS at 0x220!\n\n");
break;
case OPT_LAST_MUTUAL + 1:
fprintf (stderr, "\nThe following cards should work with any other cards.\n"
"CAUTION! Don't enable MPU-401 if you don't have it.\n");
break;
case OPT_HIGHLEVEL:
fprintf (stderr, "\nSelect one or more of the following options\n");
break;
}
#endif
if (hw_table[nr].conditions)
if (!(hw_table[nr].conditions & selected_options))
return 0;
if (hw_table[nr].exclusive_options)
if (hw_table[nr].exclusive_options & selected_options)
return 0;
if (DISABLED_OPTIONS & B (nr))
return 0;
return 1;
}
int
think_positively (int def_answ)
{
char answ[512];
int len;
if ((len = read (0, &answ, sizeof (answ))) < 1)
{
fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
perror ("stdin");
printf ("#undef CONFIGURE_SOUNDCARD\n");
printf ("#undef KERNEL_SOUNDCARD\n");
exit (-1);
}
if (len < 2) /*
* There is an additional LF at the end
*/
return def_answ;
answ[len - 1] = 0;
if (!strcmp (answ, "y") || !strcmp (answ, "Y"))
return 1;
return 0;
}
int
ask_value (char *format, int default_answer)
{
char answ[512];
int len, num;
play_it_again_Sam:
if ((len = read (0, &answ, sizeof (answ))) < 1)
{
fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
perror ("stdin");
printf ("#undef CONFIGURE_SOUNDCARD\n");
printf ("#undef KERNEL_SOUNDCARD\n");
exit (-1);
}
if (len < 2) /*
* There is an additional LF at the end
*/
return default_answer;
answ[len - 1] = 0;
if (sscanf (answ, format, &num) != 1)
{
fprintf (stderr, "Illegal format. Try again: ");
goto play_it_again_Sam;
}
return num;
}
int
main (int argc, char *argv[])
{
int i, num, def_size, full_driver = 1;
char answ[10];
printf ("/*\tGenerated by configure. Don't edit!!!!\t*/\n\n");
fprintf (stderr, "\nConfiguring the sound support\n\n");
#if 0
/*
* The full driver appeared to be impossible to compile and boot.
* There are too much supported cards now.
*/
fprintf (stderr, "Do you want to include full version of the sound driver (n/y) ? ");
if (think_positively (0))
{
/*
* Select all but some most dangerous cards. These cards are difficult to
* detect reliably or conflict with some other cards (SCSI, Mitsumi)
*/
selected_options = 0xffffffff &
~(B (OPT_MPU401) | B (OPT_UART6850) | B (OPT_PSS)) &
~DISABLED_OPTIONS;
fprintf (stderr, "Note! MPU-401, PSS and 6850 UART drivers not enabled\n");
full_driver = 1;
}
else
#endif
{
#if 0
fprintf (stderr, "Do you want to DISABLE the Sound Driver (n/y) ?");
if (think_positively (0))
{
printf ("#undef CONFIGURE_SOUNDCARD\n");
printf ("#undef KERNEL_SOUNDCARD\n");
exit (0);
}
#endif
/*
* Partial driver
*/
full_driver = 0;
for (i = 0; i <= OPT_LAST; i++)
if (can_select_option (i))
{
if (!(selected_options & B (i))) /*
* Not selected yet
*/
if (!hw_table[i].verify)
{
if (hw_table[i].alias)
selected_options |= B (hw_table[i].alias);
else
selected_options |= B (i);
}
else
{
int def_answ = hw_table[i].default_answ;
fprintf (stderr,
def_answ ? " %s (y/n) ? " : " %s (n/y) ? ",
questions[i]);
if (think_positively (def_answ))
if (hw_table[i].alias)
selected_options |= B (hw_table[i].alias);
else
selected_options |= B (i);
}
}
}
if (selected_options & B (OPT_SBPRO))
{
fprintf (stderr, "Do you want support for the mixer of SG NX Pro ? ");
if (think_positively (0))
printf ("#define __SGNXPRO__\n");
}
if (selected_options & B (OPT_SB))
{
fprintf (stderr, "Do you want support for the MV Jazz16 (ProSonic etc.) ? ");
if (think_positively (0))
{
printf ("#define JAZZ16\n");
do
{
fprintf (stderr, "\tValid 16 bit DMA channels for ProSonic/Jazz 16 are\n");
fprintf (stderr, "\t1, 3, 5 (default), 7\n");
fprintf (stderr, "\tEnter 16bit DMA channel for Prosonic : ");
num = ask_value ("%d", 5);
}
while (num != 1 && num != 3 && num != 5 && num != 7);
fprintf (stderr, "ProSonic 16 bit DMA set to %d\n", num);
printf ("#define JAZZ_DMA16 %d\n", num);
fprintf (stderr, "Do you have SoundMan Wave (n/y) ? ");
if (think_positively (0))
{
printf ("#define SM_WAVE\n");
midi0001_again:
fprintf
(stderr,
"Logitech SoundMan Wave has a microcontroller which must be initialized\n"
"before MIDI emulation works. This is possible only if the microcode\n"
"file is compiled into the driver.\n"
"Do you have access to the MIDI0001.BIN file (y/n) ? ");
if (think_positively (1))
{
char path[512];
fprintf (stderr,
"Enter full name of the MIDI0001.BIN file (pwd is sound): ");
scanf ("%s", path);
fprintf (stderr, "including microcode file %s\n", path);
if (!bin2hex (path, "smw-midi0001.h", "smw_ucode"))
{
fprintf (stderr, "couldn't open %s file\n",
path);
fprintf (stderr, "try again with correct path? ");
if (think_positively (1))
goto midi0001_again;
}
else
printf ("#define SMW_MIDI0001_INCLUDED\n");
}
}
}
}
if (selected_options & B (OPT_SBPRO))
{
fprintf (stderr, "\n\nThe Logitech SoundMan Games supports 44 kHz in stereo\n"
"while the standard SB Pro supports just 22 kHz/stereo\n"
"You have an option to enable the SM Games mode.\n"
"However do enable it only if you are _sure_ that your\n"
"card is a SM Games. Enabling this feature with a\n"
"plain old SB Pro _will_ cause troubles with stereo mode.\n"
"\n"
"DANGER! Read the above once again before answering 'y'\n"
"Answer 'n' in case you are unsure what to do!\n");
fprintf (stderr, "Do you have a Logitech SoundMan Games (n/y) ? ");
if (think_positively (0))
printf ("#define SM_GAMES\n");
}
if (selected_options & B (OPT_SB16))
selected_options |= B (OPT_SBPRO);
if (selected_options & B (OPT_AEDSP16))
{
int sel1 = 0;
if (selected_options & B (OPT_SBPRO))
{
fprintf (stderr, "Do you want support for the Audio Excel SoundBlaster pro mode ? ");
if (think_positively (1))
{
printf ("#define AEDSP16_SBPRO\n");
sel1 = 1;
}
}
if ((selected_options & B (OPT_MSS)) && (sel1 == 0))
{
fprintf (stderr, "Do you want support for the Audio Excel Microsoft Sound System mode? ");
if (think_positively (1))
{
printf ("#define AEDSP16_MSS\n");
sel1 = 1;
}
}
if (sel1 == 0)
{
printf ("#undef CONFIGURE_SOUNDCARD\n");
printf ("#undef KERNEL_SOUNDCARD\n");
fprintf (stderr, "ERROR!!!!!\nYou loose: you must select at least one mode when using Audio Excel!\n");
exit (-1);
}
if (selected_options & B (OPT_MPU401))
printf ("#define AEDSP16_MPU401\n");
}
if (selected_options & B (OPT_PSS))
{
genld_again:
fprintf
(stderr,
"if you wish to emulate the soundblaster and you have a DSPxxx.LD.\n"
"then you must include the LD in the kernel.\n"
"Do you wish to include a LD (y/n) ? ");
if (think_positively (1))
{
char path[512];
fprintf (stderr,
"Enter the path to your LD file (pwd is sound): ");
scanf ("%s", path);
fprintf (stderr, "including LD file %s\n", path);
if (!bin2hex (path, "synth-ld.h", "pss_synth"))
{
fprintf (stderr, "couldn't open %s as the ld file\n",
path);
fprintf (stderr, "try again with correct path? ");
if (think_positively (1))
goto genld_again;
}
}
else
{
FILE *sf = fopen ("synth-ld.h", "w");
fprintf (sf, "/* automaticaly generated by configure */\n");
fprintf (sf, "unsigned char pss_synth[1];\n"
"#define pss_synthLen 0\n");
fclose (sf);
}
}
if (selected_options & B (OPT_TRIX))
{
hex2hex_again:
fprintf (stderr, "MediaTriX audioTriX Pro has a onboard microcontroller\n"
"which needs to be initialized by downloading\n"
"the code from file TRXPRO.HEX in the DOS driver\n"
"directory. If you don't have the TRXPRO.HEX handy\n"
"you may skip this step. However SB and MPU-401\n"
"modes of AudioTriX Pro will not work without\n"
"this file!\n"
"\n"
"Do you want to include TRXPRO.HEX in your kernel (y/n) ? ");
if (think_positively (1))
{
char path[512];
fprintf (stderr,
"Enter the path to your TRXPRO.HEX file (pwd is sound): ");
scanf ("%s", path);
fprintf (stderr, "including HEX file %s\n", path);
if (!hex2hex (path, "trix_boot.h", "static unsigned char trix_boot"))
goto hex2hex_again;
printf ("#define INCLUDE_TRIX_BOOT\n");
}
}
if (!(selected_options & ANY_DEVS))
{
printf ("#undef CONFIGURE_SOUNDCARD\n");
printf ("#undef KERNEL_SOUNDCARD\n");
fprintf (stderr, "\n*** This combination is useless. Sound driver disabled!!! ***\n\n");
exit (0);
}
else
printf ("#define KERNEL_SOUNDCARD\n");
for (i = 0; i <= OPT_LAST; i++)
if (!hw_table[i].alias)
if (selected_options & B (i))
printf ("#undef EXCLUDE_%s\n", hw_table[i].macro);
else
printf ("#define EXCLUDE_%s\n", hw_table[i].macro);
/*
* IRQ and DMA settings
*/
printf ("\n");
#if defined(linux)
if (selected_options & B (OPT_AEDSP16))
{
fprintf (stderr, "\nI/O base for Audio Excel DSP 16 ?\n"
"Warning:\n"
"If you are using Audio Excel SoundBlaster emulation,\n"
"you must use the same I/O base for Audio Excel and SoundBlaster.\n"
"The factory default is 220 (other possible value is 240)\n"
"Enter the Audio Excel DSP 16 I/O base: ");
num = ask_value ("%x", 0x220);
fprintf (stderr, "Audio Excel DSP 16 I/O base set to %03x\n", num);
printf ("#define AEDSP16_BASE 0x%03x\n", num);
}
if ((selected_options & B (OPT_SB)) && selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
{
fprintf (stderr, "\nI/O base for SB?\n"
"The factory default is 220\n"
"Enter the SB I/O base: ");
num = ask_value ("%x", 0x220);
fprintf (stderr, "SB I/O base set to %03x\n", num);
printf ("#define SBC_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for SoundBlaster?\n"
"The IRQ address is defined by the jumpers on your card.\n"
"The factory default is either 5 or 7 (depending on the model).\n"
"Valid values are 9(=2), 5, 7 and 10.\n"
"Enter the value: ");
num = ask_value ("%d", 7);
if (num != 9 && num != 5 && num != 7 && num != 10)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 7;
}
fprintf (stderr, "SoundBlaster IRQ set to %d\n", num);
printf ("#define SBC_IRQ %d\n", num);
if (selected_options & (B (OPT_SBPRO) | B (OPT_PAS)))
{
fprintf (stderr, "\nDMA channel for SoundBlaster?\n"
"For SB 1.0, 1.5 and 2.0 this MUST be 1\n"
"SB Pro supports DMA channels 0, 1 and 3 (jumper)\n"
"For SB16 give the 8 bit DMA# here\n"
"The default value is 1\n"
"Enter the value: ");
num = ask_value ("%d", 1);
if (num < 0 || num > 3)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 1;
}
fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
printf ("#define SBC_DMA %d\n", num);
sb_dma = num;
}
if (selected_options & B (OPT_SB16))
{
fprintf (stderr, "\n16 bit DMA channel for SoundBlaster 16?\n"
"Possible values are 5, 6 or 7\n"
"The default value is 6\n"
"Enter the value: ");
num = ask_value ("%d", 6);
if ((num < 5 || num > 7) && (num != sb_dma))
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 6;
}
fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
printf ("#define SB16_DMA %d\n", num);
fprintf (stderr, "\nI/O base for SB16 Midi?\n"
"Possible values are 300 and 330\n"
"The factory default is 330\n"
"Enter the SB16 Midi I/O base: ");
num = ask_value ("%x", 0x330);
fprintf (stderr, "SB16 Midi I/O base set to %03x\n", num);
printf ("#define SB16MIDI_BASE 0x%03x\n", num);
}
}
if (selected_options & B (OPT_PAS))
{
if (selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
{
fprintf (stderr, "\nIRQ number for ProAudioSpectrum?\n"
"The recommended value is the IRQ used under DOS.\n"
"Please refer to the ProAudioSpectrum User's Guide.\n"
"The default value is 10.\n"
"Enter the value: ");
num = ask_value ("%d", 10);
if (num == 6 || num < 3 || num > 15 || num == 2) /*
* Illegal
*/
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 10;
}
fprintf (stderr, "ProAudioSpectrum IRQ set to %d\n", num);
printf ("#define PAS_IRQ %d\n", num);
}
if (selected_options & B (OPT_AUDIO))
{
fprintf (stderr, "\nDMA number for ProAudioSpectrum?\n"
"The recommended value is the DMA channel under DOS.\n"
"Please refer to the ProAudioSpectrum User's Guide.\n"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num == 4 || num < 0 || num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nProAudioSpectrum DMA set to %d\n", num);
printf ("#define PAS_DMA %d\n", num);
}
fprintf (stderr, "\nEnable Joystick port on ProAudioSpectrum (n/y) ? ");
if (think_positively (0))
printf ("#define PAS_JOYSTICK_ENABLE\n");
fprintf (stderr, "PAS16 could be noisy with some mother boards\n"
"There is a command line switch (was it :T?)\n"
"in the DOS driver for PAS16 which solves this.\n"
"Don't enable this feature unless you have problems!\n"
"Do you have to use this switch with DOS (y/n) ?");
if (think_positively (0))
printf ("#define BROKEN_BUS_CLOCK\n");
}
if (selected_options & B (OPT_GUS))
{
fprintf (stderr, "\nI/O base for Gravis Ultrasound?\n"
"Valid choices are 210, 220, 230, 240, 250 or 260\n"
"The factory default is 220\n"
"Enter the GUS I/O base: ");
num = ask_value ("%x", 0x220);
if ((num > 0x260) || ((num & 0xf0f) != 0x200) || ((num & 0x0f0) > 0x060))
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 0x220;
}
if ((selected_options & B (OPT_SB)) && (num == 0x220))
{
fprintf (stderr, "FATAL ERROR!!!!!!!!!!!!!!\n"
"\t0x220 cannot be used if SoundBlaster is enabled.\n"
"\tRun the config again.\n");
printf ("#undef CONFIGURE_SOUNDCARD\n");
printf ("#undef KERNEL_SOUNDCARD\n");
exit (-1);
}
fprintf (stderr, "GUS I/O base set to %03x\n", num);
printf ("#define GUS_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for Gravis UltraSound?\n"
"The recommended value is the IRQ used under DOS.\n"
"Please refer to the Gravis Ultrasound User's Guide.\n"
"The default value is 15.\n"
"Enter the value: ");
num = ask_value ("%d", 15);
if (num == 6 || num < 3 || num > 15 || num == 2) /*
* Invalid
*/
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 15;
}
fprintf (stderr, "Gravis UltraSound IRQ set to %d\n", num);
printf ("#define GUS_IRQ %d\n", num);
fprintf (stderr, "\nDMA number for Gravis UltraSound?\n"
"The recommended value is the DMA channel under DOS.\n"
"Please refer to the Gravis Ultrasound User's Guide.\n"
"The default value is 6\n"
"Enter the value: ");
num = ask_value ("%d", 6);
if (num == 4 || num < 0 || num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 6;
}
fprintf (stderr, "\nGravis UltraSound DMA set to %d\n", num);
printf ("#define GUS_DMA %d\n", num);
if (selected_options & B (OPT_GUSMAX))
{
fprintf (stderr, "\nSecond DMA channel for GUS MAX (optional)?\n"
"The default value is 7 (0 disables)\n"
"Enter the value: ");
num = ask_value ("%d", 7);
if (num > 0)
{
if (num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 7;
}
fprintf (stderr, "\nGUSMAX DMA set to %d\n", num);
printf ("#define GUSMAX_DMA %d\n", num);
}
}
if (selected_options & B (OPT_GUS16))
{
fprintf (stderr, "\nI/O base for GUS16 (GUS 16 bit sampling option)?\n"
"The factory default is 530\n"
"Other possible values are 604, E80 or F40\n"
"Enter the GUS16 I/O base: ");
num = ask_value ("%x", 0x530);
fprintf (stderr, "GUS16 I/O base set to %03x\n", num);
printf ("#define GUS16_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for GUS16?\n"
"Valid numbers are: 3, 4, 5, 7, or 9(=2).\n"
"The default value is 7.\n"
"Enter the value: ");
num = ask_value ("%d", 7);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 7;
}
fprintf (stderr, "GUS16 IRQ set to %d\n", num);
printf ("#define GUS16_IRQ %d\n", num);
fprintf (stderr, "\nDMA number for GUS16?\n"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num < 0 || num > 3)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nGUS16 DMA set to %d\n", num);
printf ("#define GUS16_DMA %d\n", num);
}
}
if (selected_options & B (OPT_MPU401))
{
fprintf (stderr, "\nI/O base for MPU-401?\n"
"The factory default is 330\n"
"Enter the MPU-401 I/O base: ");
num = ask_value ("%x", 0x330);
fprintf (stderr, "MPU-401 I/O base set to %03x\n", num);
printf ("#define MPU_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for MPU-401?\n"
"Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
"The default value is 9.\n"
"Enter the value: ");
num = ask_value ("%d", 9);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 5;
}
fprintf (stderr, "MPU-401 IRQ set to %d\n", num);
printf ("#define MPU_IRQ %d\n", num);
}
if (selected_options & B (OPT_UART6850))
{
fprintf (stderr, "\nI/O base for 6850 UART Midi?\n"
"Be carefull. No defaults.\n"
"Enter the 6850 UART I/O base: ");
num = ask_value ("%x", 0);
if (num == 0)
{
/*
* Invalid value entered
*/
printf ("#define EXCLUDE_UART6850\n");
}
else
{
fprintf (stderr, "6850 UART I/O base set to %03x\n", num);
printf ("#define U6850_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for 6850 UART?\n"
"Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
"The default value is 5.\n"
"Enter the value: ");
num = ask_value ("%d", 5);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 5;
}
fprintf (stderr, "6850 UART IRQ set to %d\n", num);
printf ("#define U6850_IRQ %d\n", num);
}
}
if (selected_options & B (OPT_PSS))
{
fprintf (stderr, "\nI/O base for PSS?\n"
"The factory default is 220 (240 also possible)\n"
"Enter the PSS I/O base: ");
num = ask_value ("%x", 0x220);
fprintf (stderr, "PSS I/O base set to %03x\n", num);
printf ("#define PSS_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for PSS?\n"
"Valid numbers are: 3, 4, 5, 7, 9(=2) or 10.\n"
"The default value is 10.\n"
"Enter the value: ");
num = ask_value ("%d", 10);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 7;
}
fprintf (stderr, "PSS IRQ set to %d\n", num);
printf ("#define PSS_IRQ %d\n", num);
fprintf (stderr, "\nDMA number for ECHO-PSS?\n"
"The default value is 5\n"
"Valid values are 5, 6 and 7\n"
"Enter the value: ");
num = ask_value ("%d", 5);
if (num < 5 || num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 5;
}
fprintf (stderr, "\nECHO-PSS DMA set to %d\n", num);
printf ("#define PSS_DMA %d\n", num);
fprintf (stderr, "\nMSS (MS Sound System) I/O base for the PSS card?\n"
"The factory default is 530\n"
"Other possible values are 604, E80 or F40\n"
"Enter the MSS I/O base: ");
num = ask_value ("%x", 0x530);
fprintf (stderr, "PSS/MSS I/O base set to %03x\n", num);
printf ("#define PSS_MSS_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for the MSS mode of PSS ?\n"
"Valid numbers are: 7, 9(=2), 10 and 11.\n"
"The default value is 11.\n"
"Enter the value: ");
num = ask_value ("%d", 11);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 11;
}
fprintf (stderr, "PSS/MSS IRQ set to %d\n", num);
printf ("#define PSS_MSS_IRQ %d\n", num);
fprintf (stderr, "\nMSS DMA number for PSS?\n"
"Valid values are 0, 1 and 3.\n"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num == 4 || num < 0 || num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nPSS/MSS DMA set to %d\n", num);
printf ("#define PSS_MSS_DMA %d\n", num);
fprintf (stderr, "\nMIDI I/O base for PSS?\n"
"The factory default is 330\n"
"Enter the PSS MIDI I/O base: ");
num = ask_value ("%x", 0x330);
fprintf (stderr, "PSS/MIDI I/O base set to %03x\n", num);
printf ("#define PSS_MPU_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for PSS MIDI?\n"
"Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
"The default value is 9.\n"
"Enter the value: ");
num = ask_value ("%d", 9);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 5;
}
fprintf (stderr, "PSS MIDI IRQ set to %d\n", num);
printf ("#define PSS_MPU_IRQ %d\n", num);
}
if (selected_options & B (OPT_MSS))
{
fprintf (stderr, "\nI/O base for MSS (MS Sound System)?\n"
"The factory default is 530\n"
"Other possible values are 604, E80 or F40\n"
"Enter the MSS I/O base: ");
num = ask_value ("%x", 0x530);
fprintf (stderr, "MSS I/O base set to %03x\n", num);
printf ("#define MSS_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for MSS?\n"
"Valid numbers are: 7, 9(=2), 10 and 11.\n"
"The default value is 10.\n"
"Enter the value: ");
num = ask_value ("%d", 10);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 7;
}
fprintf (stderr, "MSS IRQ set to %d\n", num);
printf ("#define MSS_IRQ %d\n", num);
fprintf (stderr, "\nDMA number for MSS?\n"
"Valid values are 0, 1 and 3.\n"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num == 4 || num < 0 || num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nMSS DMA set to %d\n", num);
printf ("#define MSS_DMA %d\n", num);
}
if (selected_options & B (OPT_SSCAPE))
{
int reveal_spea;
fprintf (stderr, "\n(MIDI) I/O base for Ensoniq Soundscape?\n"
"The factory default is 330\n"
"Other possible values are 320, 340 or 350\n"
"Enter the Soundscape I/O base: ");
num = ask_value ("%x", 0x330);
fprintf (stderr, "Soundscape I/O base set to %03x\n", num);
printf ("#define SSCAPE_BASE 0x%03x\n", num);
fprintf (stderr, "Is your SoundScape card made/marketed by Reveal or Spea? ");
reveal_spea = think_positively (0);
if (reveal_spea)
printf ("#define REVEAL_SPEA\n");
fprintf (stderr, "\nIRQ number for Soundscape?\n");
if (reveal_spea)
fprintf (stderr, "Check valid interrupts from the manual of your card.\n");
else
fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 10.\n");
fprintf (stderr, "The default value is 9.\n"
"Enter the value: ");
num = ask_value ("%d", 9);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 9;
}
fprintf (stderr, "Soundscape IRQ set to %d\n", num);
printf ("#define SSCAPE_IRQ %d\n", num);
fprintf (stderr, "\nDMA number for Soundscape?\n"
"Valid values are 1 and 3 (sometimes 0)"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num == 4 || num < 0 || num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nSoundscape DMA set to %d\n", num);
printf ("#define SSCAPE_DMA %d\n", num);
fprintf (stderr, "\nMSS (MS Sound System) I/O base for the SSCAPE card?\n"
"The factory default is 534\n"
"Other possible values are 608, E84 or F44\n"
"Enter the MSS I/O base: ");
num = ask_value ("%x", 0x534);
fprintf (stderr, "SSCAPE/MSS I/O base set to %03x\n", num);
printf ("#define SSCAPE_MSS_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for the MSS mode of SSCAPE ?\n");
if (reveal_spea)
fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 15.\n");
else
fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 10.\n");
fprintf (stderr, "The default value is 5.\n"
"Enter the value: ");
num = ask_value ("%d", 5);
if (num == 6 || num < 3 || num > 15)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 10;
}
fprintf (stderr, "SSCAPE/MSS IRQ set to %d\n", num);
printf ("#define SSCAPE_MSS_IRQ %d\n", num);
fprintf (stderr, "\nMSS DMA number for SSCAPE?\n"
"Valid values are 0, 1 and 3.\n"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num == 4 || num < 0 || num > 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nSSCAPE/MSS DMA set to %d\n", num);
printf ("#define SSCAPE_MSS_DMA %d\n", num);
}
if (selected_options & B (OPT_TRIX))
{
fprintf (stderr, "\nWindows Sound System I/O base for the AudioTriX card?\n"
"The factory default is 530\n"
"Other possible values are 604, E80 or F40\n"
"Enter the MSS I/O base: ");
num = ask_value ("%x", 0x530);
fprintf (stderr, "AudioTriX MSS I/O base set to %03x\n", num);
printf ("#define TRIX_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for the WSS mode of AudioTriX ?\n"
"Valid numbers are: 5, 7, 9(=2), 10 and 11.\n"
"The default value is 11.\n"
"Enter the value: ");
num = ask_value ("%d", 11);
if (num != 5 && num != 7 && num != 9 && num != 10 && num != 11)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 11;
}
fprintf (stderr, " AudioTriX WSS IRQ set to %d\n", num);
printf ("#define TRIX_IRQ %d\n", num);
fprintf (stderr, "\nWSS DMA number for AudioTriX?\n"
"Valid values are 0, 1 and 3.\n"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num != 0 && num != 1 && num != 3)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nAudioTriX/WSS DMA set to %d\n", num);
printf ("#define TRIX_DMA %d\n", num);
fprintf (stderr, "\nSoundBlaster I/O address for the AudioTriX card?\n"
"The factory default is 220\n"
"Other possible values are 200, 210, 230, 240, 250, 260 and 270\n"
"Enter the MSS I/O base: ");
num = ask_value ("%x", 0x220);
fprintf (stderr, "AudioTriX SB I/O base set to %03x\n", num);
printf ("#define TRIX_SB_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for the SB mode of AudioTriX ?\n"
"Valid numbers are: 3, 4, 5 and 7.\n"
"The default value is 7.\n"
"Enter the value: ");
num = ask_value ("%d", 7);
if (num != 3 && num != 4 && num != 5 && num != 7)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 7;
}
fprintf (stderr, " AudioTriX SB IRQ set to %d\n", num);
printf ("#define TRIX_SB_IRQ %d\n", num);
fprintf (stderr, "\nSB DMA number for AudioTriX?\n"
"Valid values are 1 and 3.\n"
"The default value is 1\n"
"Enter the value: ");
num = ask_value ("%d", 1);
if (num != 1 && num != 3)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 1;
}
fprintf (stderr, "\nAudioTriX/SB DMA set to %d\n", num);
printf ("#define TRIX_SB_DMA %d\n", num);
fprintf (stderr, "\nMIDI (MPU-401) I/O address for the AudioTriX card?\n"
"The factory default is 330\n"
"Other possible values are 330, 370, 3B0 and 3F0\n"
"Enter the MPU I/O base: ");
num = ask_value ("%x", 0x330);
fprintf (stderr, "AudioTriX MIDI I/O base set to %03x\n", num);
printf ("#define TRIX_MPU_BASE 0x%03x\n", num);
fprintf (stderr, "\nMIDI IRQ number for the AudioTriX ?\n"
"Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
"The default value is 5.\n"
"Enter the value: ");
num = ask_value ("%d", 5);
if (num != 3 && num != 4 && num != 5 && num != 7 && num != 9)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 5;
}
fprintf (stderr, " AudioTriX MIDI IRQ set to %d\n", num);
printf ("#define TRIX_MPU_IRQ %d\n", num);
}
if (selected_options & B (OPT_MAD16))
{
fprintf (stderr, "\n*** Options for the MAD16 and Mozart based cards ***\n\n");
fprintf (stderr, "\nWindows Sound System I/O base for the MAD16/Mozart card?\n"
"The factory default is 530\n"
"Other possible values are 604, E80 or F40\n"
"(Check which ones are supported by your card!!!!!!)\n"
"Enter the MSS I/O base: ");
num = ask_value ("%x", 0x530);
fprintf (stderr, "MAD16 MSS I/O base set to %03x\n", num);
printf ("#define MAD16_BASE 0x%03x\n", num);
fprintf (stderr, "\nIRQ number for the WSS mode of MAD16/Mozart ?\n"
"Valid numbers are: 7, 9(=2), 10 and 11.\n"
"The default value is 11.\n"
"Enter the value: ");
num = ask_value ("%d", 11);
if (num != 7 && num != 9 && num != 10 && num != 11)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 11;
}
fprintf (stderr, " MAD16 WSS IRQ set to %d\n", num);
printf ("#define MAD16_IRQ %d\n", num);
fprintf (stderr, "\nWSS DMA number for MAD16/Mozart?\n"
"Valid values are 0, 1 and 3.\n"
"The default value is 3\n"
"Enter the value: ");
num = ask_value ("%d", 3);
if (num != 0 && num != 1 && num != 3)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 3;
}
fprintf (stderr, "\nMAD16/WSS DMA set to %d\n", num);
printf ("#define MAD16_DMA %d\n", num);
fprintf (stderr, "\nMIDI (MPU-401) I/O address for the MAD16 card?\n"
"(MPU401 is not supported by Mozart and 82C928)\n"
"(This is the second MIDI port in TB Tropez)\n"
"The factory default is 330 (use 0 to disable)\n"
"Other possible values are 330, 320, 310 and 300\n"
"Enter the MPU I/O base: ");
num = ask_value ("%x", 0x330);
if (num == 0)
fprintf (stderr, "MAD16/Mozart MIDI port disabled\n");
else
{
fprintf (stderr, "MAD16 MIDI I/O base set to %03x\n", num);
printf ("#define MAD16_MPU_BASE 0x%03x\n", num);
fprintf (stderr, "\nMIDI IRQ number for the MAD16 ?\n"
"Valid numbers are: 5, 7, 9(=2) and 10.\n"
"The default value is 5.\n"
"Enter the value: ");
num = ask_value ("%d", 5);
if (num != 3 && num != 4 && num != 5 && num != 7 && num != 9)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = 5;
}
fprintf (stderr, " MAD16 MIDI IRQ set to %d\n", num);
printf ("#define MAD16_MPU_IRQ %d\n", num);
}
}
#endif
if (selected_options & B (OPT_AUDIO))
{
def_size = 65536;
fprintf (stderr, "\nSelect the DMA buffer size (4096, 16384, 32768 or 65536 bytes)\n"
"%d is recommended value for this configuration.\n"
"Enter the value: ", def_size);
num = ask_value ("%d", def_size);
if (num != 4096 && num != 16384 && num != 32768 && num != 65536)
{
fprintf (stderr, "*** Illegal input! ***\n");
num = def_size;
}
fprintf (stderr, "The DMA buffer size set to %d\n", num);
printf ("#define DSP_BUFFSIZE %d\n", num);
}
printf ("#define SELECTED_SOUND_OPTIONS\t0x%08x\n", selected_options);
fprintf (stderr, "The sound driver is now configured.\n");
#if defined(SCO) || defined(ISC) || defined(SYSV)
fprintf (stderr, "Remember to update the System file\n");
#endif
exit (0);
}
int
bin2hex (char *path, char *target, char *varname)
{
int fd;
int count;
char c;
int i = 0;
if ((fd = open (path, 0)) > 0)
{
FILE *sf = fopen (target, "w");
fprintf (sf, "/* automaticaly generated by configure */\n");
fprintf (sf, "static unsigned char %s[] = {\n", varname);
while (1)
{
count = read (fd, &c, 1);
if (count == 0)
break;
if (i != 0 && (i % 10) == 0)
fprintf (sf, "\n");
fprintf (sf, "0x%02x,", c & 0xFFL);
i++;
}
fprintf (sf, "};\n"
"#define %sLen %d\n", varname, i);
fclose (sf);
close (fd);
return 1;
}
return 0;
}
|