Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 | /*
* Modifications by Christian Pellegrin <chripell@evolware.org>
*
* s3c24xx_uda134x.c -- S3C24XX_UDA134X ALSA SoC Audio board driver
*
* Copyright 2007 Dension Audio Systems Ltd.
* Author: Zoltan Devai
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/s3c24xx_uda134x.h>
#include "regs-iis.h"
#include "s3c24xx-i2s.h"
/* #define ENFORCE_RATES 1 */
/*
Unfortunately the S3C24XX in master mode has a limited capacity of
generating the clock for the codec. If you define this only rates
that are really available will be enforced. But be careful, most
user level application just want the usual sampling frequencies (8,
11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
operation for embedded systems. So if you aren't very lucky or your
hardware engineer wasn't very forward-looking it's better to leave
this undefined. If you do so an approximate value for the requested
sampling rate in the range -/+ 5% will be chosen. If this in not
possible an error will be returned.
*/
static struct clk *xtal;
static struct clk *pclk;
/* this is need because we don't have a place where to keep the
* pointers to the clocks in each substream. We get the clocks only
* when we are actually using them so we don't block stuff like
* frequency change or oscillator power-off */
static int clk_users;
static DEFINE_MUTEX(clk_lock);
static unsigned int rates[33 * 2];
#ifdef ENFORCE_RATES
static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
.count = ARRAY_SIZE(rates),
.list = rates,
.mask = 0,
};
#endif
static struct platform_device *s3c24xx_uda134x_snd_device;
static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
{
int ret = 0;
#ifdef ENFORCE_RATES
struct snd_pcm_runtime *runtime = substream->runtime;
#endif
mutex_lock(&clk_lock);
pr_debug("%s %d\n", __func__, clk_users);
if (clk_users == 0) {
xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
if (IS_ERR(xtal)) {
printk(KERN_ERR "%s cannot get xtal\n", __func__);
ret = PTR_ERR(xtal);
} else {
pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
"pclk");
if (IS_ERR(pclk)) {
printk(KERN_ERR "%s cannot get pclk\n",
__func__);
clk_put(xtal);
ret = PTR_ERR(pclk);
}
}
if (!ret) {
int i, j;
for (i = 0; i < 2; i++) {
int fs = i ? 256 : 384;
rates[i*33] = clk_get_rate(xtal) / fs;
for (j = 1; j < 33; j++)
rates[i*33 + j] = clk_get_rate(pclk) /
(j * fs);
}
}
}
clk_users += 1;
mutex_unlock(&clk_lock);
if (!ret) {
#ifdef ENFORCE_RATES
ret = snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
&hw_constraints_rates);
if (ret < 0)
printk(KERN_ERR "%s cannot set constraints\n",
__func__);
#endif
}
return ret;
}
static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
{
mutex_lock(&clk_lock);
pr_debug("%s %d\n", __func__, clk_users);
clk_users -= 1;
if (clk_users == 0) {
clk_put(xtal);
xtal = NULL;
clk_put(pclk);
pclk = NULL;
}
mutex_unlock(&clk_lock);
}
static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
unsigned int clk = 0;
int ret = 0;
int clk_source, fs_mode;
unsigned long rate = params_rate(params);
long err, cerr;
unsigned int div;
int i, bi;
err = 999999;
bi = 0;
for (i = 0; i < 2*33; i++) {
cerr = rates[i] - rate;
if (cerr < 0)
cerr = -cerr;
if (cerr < err) {
err = cerr;
bi = i;
}
}
if (bi / 33 == 1)
fs_mode = S3C2410_IISMOD_256FS;
else
fs_mode = S3C2410_IISMOD_384FS;
if (bi % 33 == 0) {
clk_source = S3C24XX_CLKSRC_MPLL;
div = 1;
} else {
clk_source = S3C24XX_CLKSRC_PCLK;
div = bi % 33;
}
pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
div, clk, err);
if ((err * 100 / rate) > 5) {
printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
"too different from desired (%ld%%)\n",
err * 100 / rate);
return -EINVAL;
}
ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
S3C2410_IISMOD_32FS);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
S3C24XX_PRESCALE(div, div));
if (ret < 0)
return ret;
/* set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
SND_SOC_CLOCK_OUT);
if (ret < 0)
return ret;
return 0;
}
static struct snd_soc_ops s3c24xx_uda134x_ops = {
.startup = s3c24xx_uda134x_startup,
.shutdown = s3c24xx_uda134x_shutdown,
.hw_params = s3c24xx_uda134x_hw_params,
};
static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
.name = "UDA134X",
.stream_name = "UDA134X",
.codec_name = "uda134x-codec",
.codec_dai_name = "uda134x-hifi",
.cpu_dai_name = "s3c24xx-iis",
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ops = &s3c24xx_uda134x_ops,
.platform_name = "s3c24xx-iis",
};
static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
.name = "S3C24XX_UDA134X",
.owner = THIS_MODULE,
.dai_link = &s3c24xx_uda134x_dai_link,
.num_links = 1,
};
static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
static void setdat(int v)
{
gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
}
static void setclk(int v)
{
gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
}
static void setmode(int v)
{
gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
}
/* FIXME - This must be codec platform data but in which board file ?? */
static struct uda134x_platform_data s3c24xx_uda134x = {
.l3 = {
.setdat = setdat,
.setclk = setclk,
.setmode = setmode,
.data_hold = 1,
.data_setup = 1,
.clock_high = 1,
.mode_hold = 1,
.mode = 1,
.mode_setup = 1,
},
};
static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
{
if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
"l3 %s pin already in use", fun);
return -EBUSY;
}
gpio_direction_output(pin, 0);
return 0;
}
static int s3c24xx_uda134x_probe(struct platform_device *pdev)
{
int ret;
printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
if (s3c24xx_uda134x_l3_pins == NULL) {
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
"unable to find platform data\n");
return -ENODEV;
}
s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
"data") < 0)
return -EBUSY;
if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
"clk") < 0) {
gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
return -EBUSY;
}
if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
"mode") < 0) {
gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
return -EBUSY;
}
s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
if (!s3c24xx_uda134x_snd_device) {
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
"Unable to register\n");
return -ENOMEM;
}
platform_set_drvdata(s3c24xx_uda134x_snd_device,
&snd_soc_s3c24xx_uda134x);
platform_device_add_data(s3c24xx_uda134x_snd_device, &s3c24xx_uda134x, sizeof(s3c24xx_uda134x));
ret = platform_device_add(s3c24xx_uda134x_snd_device);
if (ret) {
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
platform_device_put(s3c24xx_uda134x_snd_device);
}
return ret;
}
static int s3c24xx_uda134x_remove(struct platform_device *pdev)
{
platform_device_unregister(s3c24xx_uda134x_snd_device);
gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
return 0;
}
static struct platform_driver s3c24xx_uda134x_driver = {
.probe = s3c24xx_uda134x_probe,
.remove = s3c24xx_uda134x_remove,
.driver = {
.name = "s3c24xx_uda134x",
},
};
module_platform_driver(s3c24xx_uda134x_driver);
MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
MODULE_LICENSE("GPL");
|