Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 | /*
* adv_pci1723.c
* Comedi driver for the Advantech PCI-1723 card.
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Driver: adv_pci1723
* Description: Advantech PCI-1723
* Author: yonggang <rsmgnu@gmail.com>, Ian Abbott <abbotti@mev.co.uk>
* Devices: [Advantech] PCI-1723 (adv_pci1723)
* Updated: Mon, 14 Apr 2008 15:12:56 +0100
* Status: works
*
* Configuration Options: not applicable, uses comedi PCI auto config
*
* Subdevice 0 is 8-channel AO, 16-bit, range +/- 10 V.
*
* Subdevice 1 is 16-channel DIO. The channels are configurable as
* input or output in 2 groups (0 to 7, 8 to 15). Configuring any
* channel implicitly configures all channels in the same group.
*
* TODO:
* 1. Add the two milliamp ranges to the AO subdevice (0 to 20 mA,
* 4 to 20 mA).
* 2. Read the initial ranges and values of the AO subdevice at
* start-up instead of reinitializing them.
* 3. Implement calibration.
*/
#include <linux/module.h>
#include "../comedi_pci.h"
/*
* PCI Bar 2 I/O Register map (dev->iobase)
*/
#define PCI1723_AO_REG(x) (0x00 + ((x) * 2))
#define PCI1723_BOARD_ID_REG 0x10
#define PCI1723_BOARD_ID_MASK (0xf << 0)
#define PCI1723_SYNC_CTRL_REG 0x12
#define PCI1723_SYNC_CTRL(x) (((x) & 0x1) << 0)
#define PCI1723_SYNC_CTRL_ASYNC PCI1723_SYNC_CTRL(0)
#define PCI1723_SYNC_CTRL_SYNC PCI1723_SYNC_CTRL(1)
#define PCI1723_CTRL_REG 0x14
#define PCI1723_CTRL_BUSY BIT(15)
#define PCI1723_CTRL_INIT BIT(14)
#define PCI1723_CTRL_SELF BIT(8)
#define PCI1723_CTRL_IDX(x) (((x) & 0x3) << 6)
#define PCI1723_CTRL_RANGE(x) (((x) & 0x3) << 4)
#define PCI1723_CTRL_SEL(x) (((x) & 0x1) << 3)
#define PCI1723_CTRL_GAIN PCI1723_CTRL_SEL(0)
#define PCI1723_CTRL_OFFSET PCI1723_CTRL_SEL(1)
#define PCI1723_CTRL_CHAN(x) (((x) & 0x7) << 0)
#define PCI1723_CALIB_CTRL_REG 0x16
#define PCI1723_CALIB_CTRL_CS BIT(2)
#define PCI1723_CALIB_CTRL_DAT BIT(1)
#define PCI1723_CALIB_CTRL_CLK BIT(0)
#define PCI1723_CALIB_STROBE_REG 0x18
#define PCI1723_DIO_CTRL_REG 0x1a
#define PCI1723_DIO_CTRL_HDIO BIT(1)
#define PCI1723_DIO_CTRL_LDIO BIT(0)
#define PCI1723_DIO_DATA_REG 0x1c
#define PCI1723_CALIB_DATA_REG 0x1e
#define PCI1723_SYNC_STROBE_REG 0x20
#define PCI1723_RESET_AO_STROBE_REG 0x22
#define PCI1723_RESET_CALIB_STROBE_REG 0x24
#define PCI1723_RANGE_STROBE_REG 0x26
#define PCI1723_VREF_REG 0x28
#define PCI1723_VREF(x) (((x) & 0x3) << 0)
#define PCI1723_VREF_NEG10V PCI1723_VREF(0)
#define PCI1723_VREF_0V PCI1723_VREF(1)
#define PCI1723_VREF_POS10V PCI1723_VREF(3)
static int pci1723_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
int i;
for (i = 0; i < insn->n; i++) {
unsigned int val = data[i];
outw(val, dev->iobase + PCI1723_AO_REG(chan));
s->readback[chan] = val;
}
return insn->n;
}
static int pci1723_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int mask = (chan < 8) ? 0x00ff : 0xff00;
unsigned short mode = 0x0000; /* assume output */
int ret;
ret = comedi_dio_insn_config(dev, s, insn, data, mask);
if (ret)
return ret;
if (!(s->io_bits & 0x00ff))
mode |= PCI1723_DIO_CTRL_LDIO; /* low byte input */
if (!(s->io_bits & 0xff00))
mode |= PCI1723_DIO_CTRL_HDIO; /* high byte input */
outw(mode, dev->iobase + PCI1723_DIO_CTRL_REG);
return insn->n;
}
static int pci1723_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
if (comedi_dio_update_state(s, data))
outw(s->state, dev->iobase + PCI1723_DIO_DATA_REG);
data[1] = inw(dev->iobase + PCI1723_DIO_DATA_REG);
return insn->n;
}
static int pci1723_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
unsigned int val;
int ret;
int i;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
ret = comedi_alloc_subdevices(dev, 2);
if (ret)
return ret;
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 8;
s->maxdata = 0xffff;
s->range_table = &range_bipolar10;
s->insn_write = pci1723_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* synchronously reset all analog outputs to 0V, +/-10V range */
outw(PCI1723_SYNC_CTRL_SYNC, dev->iobase + PCI1723_SYNC_CTRL_REG);
for (i = 0; i < s->n_chan; i++) {
outw(PCI1723_CTRL_RANGE(0) | PCI1723_CTRL_CHAN(i),
PCI1723_CTRL_REG);
outw(0, dev->iobase + PCI1723_RANGE_STROBE_REG);
outw(0x8000, dev->iobase + PCI1723_AO_REG(i));
s->readback[i] = 0x8000;
}
outw(0, dev->iobase + PCI1723_SYNC_STROBE_REG);
/* disable syncronous control */
outw(PCI1723_SYNC_CTRL_ASYNC, dev->iobase + PCI1723_SYNC_CTRL_REG);
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = 16;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_config = pci1723_dio_insn_config;
s->insn_bits = pci1723_dio_insn_bits;
/* get initial DIO direction and state */
val = inw(dev->iobase + PCI1723_DIO_CTRL_REG);
if (!(val & PCI1723_DIO_CTRL_LDIO))
s->io_bits |= 0x00ff; /* low byte output */
if (!(val & PCI1723_DIO_CTRL_HDIO))
s->io_bits |= 0xff00; /* high byte output */
s->state = inw(dev->iobase + PCI1723_DIO_DATA_REG);
return 0;
}
static struct comedi_driver adv_pci1723_driver = {
.driver_name = "adv_pci1723",
.module = THIS_MODULE,
.auto_attach = pci1723_auto_attach,
.detach = comedi_pci_detach,
};
static int adv_pci1723_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &adv_pci1723_driver,
id->driver_data);
}
static const struct pci_device_id adv_pci1723_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, adv_pci1723_pci_table);
static struct pci_driver adv_pci1723_pci_driver = {
.name = "adv_pci1723",
.id_table = adv_pci1723_pci_table,
.probe = adv_pci1723_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(adv_pci1723_driver, adv_pci1723_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Advantech PCI-1723 Comedi driver");
MODULE_LICENSE("GPL");
|