Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 | /*
* vcnl4000.c - Support for Vishay VCNL4000 combined ambient light and
* proximity sensor
*
* Copyright 2012 Peter Meerwald <pmeerw@pmeerw.net>
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
* IIO driver for VCNL4000 (7-bit I2C slave address 0x13)
*
* TODO:
* allow to adjust IR current
* proximity threshold and event handling
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define VCNL4000_DRV_NAME "vcnl4000"
#define VCNL4000_COMMAND 0x80 /* Command register */
#define VCNL4000_PROD_REV 0x81 /* Product ID and Revision ID */
#define VCNL4000_LED_CURRENT 0x83 /* IR LED current for proximity mode */
#define VCNL4000_AL_PARAM 0x84 /* Ambient light parameter register */
#define VCNL4000_AL_RESULT_HI 0x85 /* Ambient light result register, MSB */
#define VCNL4000_AL_RESULT_LO 0x86 /* Ambient light result register, LSB */
#define VCNL4000_PS_RESULT_HI 0x87 /* Proximity result register, MSB */
#define VCNL4000_PS_RESULT_LO 0x88 /* Proximity result register, LSB */
#define VCNL4000_PS_MEAS_FREQ 0x89 /* Proximity test signal frequency */
#define VCNL4000_PS_MOD_ADJ 0x8a /* Proximity modulator timing adjustment */
/* Bit masks for COMMAND register */
#define VCNL4000_AL_RDY 0x40 /* ALS data ready? */
#define VCNL4000_PS_RDY 0x20 /* proximity data ready? */
#define VCNL4000_AL_OD 0x10 /* start on-demand ALS measurement */
#define VCNL4000_PS_OD 0x08 /* start on-demand proximity measurement */
struct vcnl4000_data {
struct i2c_client *client;
};
static const struct i2c_device_id vcnl4000_id[] = {
{ "vcnl4000", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, vcnl4000_id);
static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
u8 rdy_mask, u8 data_reg, int *val)
{
int tries = 20;
__be16 buf;
int ret;
ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
req_mask);
if (ret < 0)
return ret;
/* wait for data to become ready */
while (tries--) {
ret = i2c_smbus_read_byte_data(data->client, VCNL4000_COMMAND);
if (ret < 0)
return ret;
if (ret & rdy_mask)
break;
msleep(20); /* measurement takes up to 100 ms */
}
if (tries < 0) {
dev_err(&data->client->dev,
"vcnl4000_measure() failed, data not ready\n");
return -EIO;
}
ret = i2c_smbus_read_i2c_block_data(data->client,
data_reg, sizeof(buf), (u8 *) &buf);
if (ret < 0)
return ret;
*val = be16_to_cpu(buf);
return 0;
}
static const struct iio_chan_spec vcnl4000_channels[] = {
{
.type = IIO_LIGHT,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
}, {
.type = IIO_PROXIMITY,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}
};
static int vcnl4000_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret = -EINVAL;
struct vcnl4000_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->type) {
case IIO_LIGHT:
ret = vcnl4000_measure(data,
VCNL4000_AL_OD, VCNL4000_AL_RDY,
VCNL4000_AL_RESULT_HI, val);
if (ret < 0)
return ret;
ret = IIO_VAL_INT;
break;
case IIO_PROXIMITY:
ret = vcnl4000_measure(data,
VCNL4000_PS_OD, VCNL4000_PS_RDY,
VCNL4000_PS_RESULT_HI, val);
if (ret < 0)
return ret;
ret = IIO_VAL_INT;
break;
default:
break;
}
break;
case IIO_CHAN_INFO_SCALE:
if (chan->type == IIO_LIGHT) {
*val = 0;
*val2 = 250000;
ret = IIO_VAL_INT_PLUS_MICRO;
}
break;
default:
break;
}
return ret;
}
static const struct iio_info vcnl4000_info = {
.read_raw = vcnl4000_read_raw,
.driver_module = THIS_MODULE,
};
static int vcnl4000_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct vcnl4000_data *data;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
ret = i2c_smbus_read_byte_data(data->client, VCNL4000_PROD_REV);
if (ret < 0)
return ret;
dev_info(&client->dev, "VCNL4000 Ambient light/proximity sensor, Prod %02x, Rev: %02x\n",
ret >> 4, ret & 0xf);
indio_dev->dev.parent = &client->dev;
indio_dev->info = &vcnl4000_info;
indio_dev->channels = vcnl4000_channels;
indio_dev->num_channels = ARRAY_SIZE(vcnl4000_channels);
indio_dev->name = VCNL4000_DRV_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
return devm_iio_device_register(&client->dev, indio_dev);
}
static struct i2c_driver vcnl4000_driver = {
.driver = {
.name = VCNL4000_DRV_NAME,
},
.probe = vcnl4000_probe,
.id_table = vcnl4000_id,
};
module_i2c_driver(vcnl4000_driver);
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
MODULE_DESCRIPTION("Vishay VCNL4000 proximity/ambient light sensor driver");
MODULE_LICENSE("GPL");
|