Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 | /*
* Copyright (C) STMicroelectronics 2016
*
* Author: Gerald Baeza <gerald.baeza@st.com>
*
* License terms: GNU General Public License (GPL), version 2
*
* Inspired by timer-stm32.c from Maxime Coquelin
* pwm-atmel.c from Bo Shen
*/
#include <linux/mfd/stm32-timers.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#define CCMR_CHANNEL_SHIFT 8
#define CCMR_CHANNEL_MASK 0xFF
#define MAX_BREAKINPUT 2
struct stm32_pwm {
struct pwm_chip chip;
struct device *dev;
struct clk *clk;
struct regmap *regmap;
u32 max_arr;
bool have_complementary_output;
};
struct stm32_breakinput {
u32 index;
u32 level;
u32 filter;
};
static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip)
{
return container_of(chip, struct stm32_pwm, chip);
}
static u32 active_channels(struct stm32_pwm *dev)
{
u32 ccer;
regmap_read(dev->regmap, TIM_CCER, &ccer);
return ccer & TIM_CCER_CCXE;
}
static int write_ccrx(struct stm32_pwm *dev, int ch, u32 value)
{
switch (ch) {
case 0:
return regmap_write(dev->regmap, TIM_CCR1, value);
case 1:
return regmap_write(dev->regmap, TIM_CCR2, value);
case 2:
return regmap_write(dev->regmap, TIM_CCR3, value);
case 3:
return regmap_write(dev->regmap, TIM_CCR4, value);
}
return -EINVAL;
}
static int stm32_pwm_config(struct stm32_pwm *priv, int ch,
int duty_ns, int period_ns)
{
unsigned long long prd, div, dty;
unsigned int prescaler = 0;
u32 ccmr, mask, shift;
/* Period and prescaler values depends on clock rate */
div = (unsigned long long)clk_get_rate(priv->clk) * period_ns;
do_div(div, NSEC_PER_SEC);
prd = div;
while (div > priv->max_arr) {
prescaler++;
div = prd;
do_div(div, prescaler + 1);
}
prd = div;
if (prescaler > MAX_TIM_PSC)
return -EINVAL;
/*
* All channels share the same prescaler and counter so when two
* channels are active at the same time we can't change them
*/
if (active_channels(priv) & ~(1 << ch * 4)) {
u32 psc, arr;
regmap_read(priv->regmap, TIM_PSC, &psc);
regmap_read(priv->regmap, TIM_ARR, &arr);
if ((psc != prescaler) || (arr != prd - 1))
return -EBUSY;
}
regmap_write(priv->regmap, TIM_PSC, prescaler);
regmap_write(priv->regmap, TIM_ARR, prd - 1);
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE);
/* Calculate the duty cycles */
dty = prd * duty_ns;
do_div(dty, period_ns);
write_ccrx(priv, ch, dty);
/* Configure output mode */
shift = (ch & 0x1) * CCMR_CHANNEL_SHIFT;
ccmr = (TIM_CCMR_PE | TIM_CCMR_M1) << shift;
mask = CCMR_CHANNEL_MASK << shift;
if (ch < 2)
regmap_update_bits(priv->regmap, TIM_CCMR1, mask, ccmr);
else
regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr);
regmap_update_bits(priv->regmap, TIM_BDTR,
TIM_BDTR_MOE | TIM_BDTR_AOE,
TIM_BDTR_MOE | TIM_BDTR_AOE);
return 0;
}
static int stm32_pwm_set_polarity(struct stm32_pwm *priv, int ch,
enum pwm_polarity polarity)
{
u32 mask;
mask = TIM_CCER_CC1P << (ch * 4);
if (priv->have_complementary_output)
mask |= TIM_CCER_CC1NP << (ch * 4);
regmap_update_bits(priv->regmap, TIM_CCER, mask,
polarity == PWM_POLARITY_NORMAL ? 0 : mask);
return 0;
}
static int stm32_pwm_enable(struct stm32_pwm *priv, int ch)
{
u32 mask;
int ret;
ret = clk_enable(priv->clk);
if (ret)
return ret;
/* Enable channel */
mask = TIM_CCER_CC1E << (ch * 4);
if (priv->have_complementary_output)
mask |= TIM_CCER_CC1NE << (ch * 4);
regmap_update_bits(priv->regmap, TIM_CCER, mask, mask);
/* Make sure that registers are updated */
regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
/* Enable controller */
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN);
return 0;
}
static void stm32_pwm_disable(struct stm32_pwm *priv, int ch)
{
u32 mask;
/* Disable channel */
mask = TIM_CCER_CC1E << (ch * 4);
if (priv->have_complementary_output)
mask |= TIM_CCER_CC1NE << (ch * 4);
regmap_update_bits(priv->regmap, TIM_CCER, mask, 0);
/* When all channels are disabled, we can disable the controller */
if (!active_channels(priv))
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
clk_disable(priv->clk);
}
static int stm32_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
bool enabled;
struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
int ret;
enabled = pwm->state.enabled;
if (enabled && !state->enabled) {
stm32_pwm_disable(priv, pwm->hwpwm);
return 0;
}
if (state->polarity != pwm->state.polarity)
stm32_pwm_set_polarity(priv, pwm->hwpwm, state->polarity);
ret = stm32_pwm_config(priv, pwm->hwpwm,
state->duty_cycle, state->period);
if (ret)
return ret;
if (!enabled && state->enabled)
ret = stm32_pwm_enable(priv, pwm->hwpwm);
return ret;
}
static const struct pwm_ops stm32pwm_ops = {
.owner = THIS_MODULE,
.apply = stm32_pwm_apply,
};
static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
int index, int level, int filter)
{
u32 bke = (index == 0) ? TIM_BDTR_BKE : TIM_BDTR_BK2E;
int shift = (index == 0) ? TIM_BDTR_BKF_SHIFT : TIM_BDTR_BK2F_SHIFT;
u32 mask = (index == 0) ? TIM_BDTR_BKE | TIM_BDTR_BKP | TIM_BDTR_BKF
: TIM_BDTR_BK2E | TIM_BDTR_BK2P | TIM_BDTR_BK2F;
u32 bdtr = bke;
/*
* The both bits could be set since only one will be wrote
* due to mask value.
*/
if (level)
bdtr |= TIM_BDTR_BKP | TIM_BDTR_BK2P;
bdtr |= (filter & TIM_BDTR_BKF_MASK) << shift;
regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr);
regmap_read(priv->regmap, TIM_BDTR, &bdtr);
return (bdtr & bke) ? 0 : -EINVAL;
}
static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
struct device_node *np)
{
struct stm32_breakinput breakinput[MAX_BREAKINPUT];
int nb, ret, i, array_size;
nb = of_property_count_elems_of_size(np, "st,breakinput",
sizeof(struct stm32_breakinput));
/*
* Because "st,breakinput" parameter is optional do not make probe
* failed if it doesn't exist.
*/
if (nb <= 0)
return 0;
if (nb > MAX_BREAKINPUT)
return -EINVAL;
array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32);
ret = of_property_read_u32_array(np, "st,breakinput",
(u32 *)breakinput, array_size);
if (ret)
return ret;
for (i = 0; i < nb && !ret; i++) {
ret = stm32_pwm_set_breakinput(priv,
breakinput[i].index,
breakinput[i].level,
breakinput[i].filter);
}
return ret;
}
static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
{
u32 ccer;
/*
* If complementary bit doesn't exist writing 1 will have no
* effect so we can detect it.
*/
regmap_update_bits(priv->regmap,
TIM_CCER, TIM_CCER_CC1NE, TIM_CCER_CC1NE);
regmap_read(priv->regmap, TIM_CCER, &ccer);
regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE, 0);
priv->have_complementary_output = (ccer != 0);
}
static int stm32_pwm_detect_channels(struct stm32_pwm *priv)
{
u32 ccer;
int npwm = 0;
/*
* If channels enable bits don't exist writing 1 will have no
* effect so we can detect and count them.
*/
regmap_update_bits(priv->regmap,
TIM_CCER, TIM_CCER_CCXE, TIM_CCER_CCXE);
regmap_read(priv->regmap, TIM_CCER, &ccer);
regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE, 0);
if (ccer & TIM_CCER_CC1E)
npwm++;
if (ccer & TIM_CCER_CC2E)
npwm++;
if (ccer & TIM_CCER_CC3E)
npwm++;
if (ccer & TIM_CCER_CC4E)
npwm++;
return npwm;
}
static int stm32_pwm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent);
struct stm32_pwm *priv;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->regmap = ddata->regmap;
priv->clk = ddata->clk;
priv->max_arr = ddata->max_arr;
if (!priv->regmap || !priv->clk)
return -EINVAL;
ret = stm32_pwm_apply_breakinputs(priv, np);
if (ret)
return ret;
stm32_pwm_detect_complementary(priv);
priv->chip.base = -1;
priv->chip.dev = dev;
priv->chip.ops = &stm32pwm_ops;
priv->chip.npwm = stm32_pwm_detect_channels(priv);
ret = pwmchip_add(&priv->chip);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, priv);
return 0;
}
static int stm32_pwm_remove(struct platform_device *pdev)
{
struct stm32_pwm *priv = platform_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < priv->chip.npwm; i++)
pwm_disable(&priv->chip.pwms[i]);
pwmchip_remove(&priv->chip);
return 0;
}
static const struct of_device_id stm32_pwm_of_match[] = {
{ .compatible = "st,stm32-pwm", },
{ /* end node */ },
};
MODULE_DEVICE_TABLE(of, stm32_pwm_of_match);
static struct platform_driver stm32_pwm_driver = {
.probe = stm32_pwm_probe,
.remove = stm32_pwm_remove,
.driver = {
.name = "stm32-pwm",
.of_match_table = stm32_pwm_of_match,
},
};
module_platform_driver(stm32_pwm_driver);
MODULE_ALIAS("platform:stm32-pwm");
MODULE_DESCRIPTION("STMicroelectronics STM32 PWM driver");
MODULE_LICENSE("GPL v2");
|