Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 | /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Qualcomm Technologies, Inc. EMAC PHY Controller driver.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/iopoll.h>
#include <linux/acpi.h>
#include "emac.h"
#include "emac-mac.h"
#include "emac-phy.h"
#include "emac-sgmii.h"
/* EMAC base register offsets */
#define EMAC_MDIO_CTRL 0x001414
#define EMAC_PHY_STS 0x001418
#define EMAC_MDIO_EX_CTRL 0x001440
/* EMAC_MDIO_CTRL */
#define MDIO_MODE BIT(30)
#define MDIO_PR BIT(29)
#define MDIO_AP_EN BIT(28)
#define MDIO_BUSY BIT(27)
#define MDIO_CLK_SEL_BMSK 0x7000000
#define MDIO_CLK_SEL_SHFT 24
#define MDIO_START BIT(23)
#define SUP_PREAMBLE BIT(22)
#define MDIO_RD_NWR BIT(21)
#define MDIO_REG_ADDR_BMSK 0x1f0000
#define MDIO_REG_ADDR_SHFT 16
#define MDIO_DATA_BMSK 0xffff
#define MDIO_DATA_SHFT 0
/* EMAC_PHY_STS */
#define PHY_ADDR_BMSK 0x1f0000
#define PHY_ADDR_SHFT 16
#define MDIO_CLK_25_4 0
#define MDIO_CLK_25_28 7
#define MDIO_WAIT_TIMES 1000
#define EMAC_LINK_SPEED_DEFAULT (\
EMAC_LINK_SPEED_10_HALF |\
EMAC_LINK_SPEED_10_FULL |\
EMAC_LINK_SPEED_100_HALF |\
EMAC_LINK_SPEED_100_FULL |\
EMAC_LINK_SPEED_1GB_FULL)
/**
* emac_phy_mdio_autopoll_disable() - disable mdio autopoll
* @adpt: the emac adapter
*
* The autopoll feature takes over the MDIO bus. In order for
* the PHY driver to be able to talk to the PHY over the MDIO
* bus, we need to temporarily disable the autopoll feature.
*/
static int emac_phy_mdio_autopoll_disable(struct emac_adapter *adpt)
{
u32 val;
/* disable autopoll */
emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, MDIO_AP_EN, 0);
/* wait for any mdio polling to complete */
if (!readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, val,
!(val & MDIO_BUSY), 100, MDIO_WAIT_TIMES * 100))
return 0;
/* failed to disable; ensure it is enabled before returning */
emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, 0, MDIO_AP_EN);
return -EBUSY;
}
/**
* emac_phy_mdio_autopoll_disable() - disable mdio autopoll
* @adpt: the emac adapter
*
* The EMAC has the ability to poll the external PHY on the MDIO
* bus for link state changes. This eliminates the need for the
* driver to poll the phy. If if the link state does change,
* the EMAC issues an interrupt on behalf of the PHY.
*/
static void emac_phy_mdio_autopoll_enable(struct emac_adapter *adpt)
{
emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, 0, MDIO_AP_EN);
}
static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum)
{
struct emac_adapter *adpt = bus->priv;
u32 reg;
int ret;
ret = emac_phy_mdio_autopoll_disable(adpt);
if (ret)
return ret;
emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK,
(addr << PHY_ADDR_SHFT));
reg = SUP_PREAMBLE |
((MDIO_CLK_25_4 << MDIO_CLK_SEL_SHFT) & MDIO_CLK_SEL_BMSK) |
((regnum << MDIO_REG_ADDR_SHFT) & MDIO_REG_ADDR_BMSK) |
MDIO_START | MDIO_RD_NWR;
writel(reg, adpt->base + EMAC_MDIO_CTRL);
if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg,
!(reg & (MDIO_START | MDIO_BUSY)),
100, MDIO_WAIT_TIMES * 100))
ret = -EIO;
else
ret = (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK;
emac_phy_mdio_autopoll_enable(adpt);
return ret;
}
static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
{
struct emac_adapter *adpt = bus->priv;
u32 reg;
int ret;
ret = emac_phy_mdio_autopoll_disable(adpt);
if (ret)
return ret;
emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK,
(addr << PHY_ADDR_SHFT));
reg = SUP_PREAMBLE |
((MDIO_CLK_25_4 << MDIO_CLK_SEL_SHFT) & MDIO_CLK_SEL_BMSK) |
((regnum << MDIO_REG_ADDR_SHFT) & MDIO_REG_ADDR_BMSK) |
((val << MDIO_DATA_SHFT) & MDIO_DATA_BMSK) |
MDIO_START;
writel(reg, adpt->base + EMAC_MDIO_CTRL);
if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg,
!(reg & (MDIO_START | MDIO_BUSY)), 100,
MDIO_WAIT_TIMES * 100))
ret = -EIO;
emac_phy_mdio_autopoll_enable(adpt);
return ret;
}
/* Configure the MDIO bus and connect the external PHY */
int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
{
struct device_node *np = pdev->dev.of_node;
struct mii_bus *mii_bus;
int ret;
/* Create the mii_bus object for talking to the MDIO bus */
adpt->mii_bus = mii_bus = devm_mdiobus_alloc(&pdev->dev);
if (!mii_bus)
return -ENOMEM;
mii_bus->name = "emac-mdio";
snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
mii_bus->read = emac_mdio_read;
mii_bus->write = emac_mdio_write;
mii_bus->parent = &pdev->dev;
mii_bus->priv = adpt;
if (has_acpi_companion(&pdev->dev)) {
u32 phy_addr;
ret = mdiobus_register(mii_bus);
if (ret) {
dev_err(&pdev->dev, "could not register mdio bus\n");
return ret;
}
ret = device_property_read_u32(&pdev->dev, "phy-channel",
&phy_addr);
if (ret)
/* If we can't read a valid phy address, then assume
* that there is only one phy on this mdio bus.
*/
adpt->phydev = phy_find_first(mii_bus);
else
adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr);
/* of_phy_find_device() claims a reference to the phydev,
* so we do that here manually as well. When the driver
* later unloads, it can unilaterally drop the reference
* without worrying about ACPI vs DT.
*/
if (adpt->phydev)
get_device(&adpt->phydev->mdio.dev);
} else {
struct device_node *phy_np;
ret = of_mdiobus_register(mii_bus, np);
if (ret) {
dev_err(&pdev->dev, "could not register mdio bus\n");
return ret;
}
phy_np = of_parse_phandle(np, "phy-handle", 0);
adpt->phydev = of_phy_find_device(phy_np);
of_node_put(phy_np);
}
if (!adpt->phydev) {
dev_err(&pdev->dev, "could not find external phy\n");
mdiobus_unregister(mii_bus);
return -ENODEV;
}
if (adpt->phydev->drv)
phy_attached_print(adpt->phydev, NULL);
return 0;
}
|