Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 | /*
* Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4X12 - CPU frequency scaling support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include "exynos-cpufreq.h"
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
static struct exynos_dvfs_info *cpufreq;
static unsigned int exynos4x12_volt_table[] = {
1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
1000000, 987500, 975000, 950000, 925000, 900000, 900000
};
static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
{CPUFREQ_BOOST_FREQ, L0, 1500 * 1000},
{0, L1, 1400 * 1000},
{0, L2, 1300 * 1000},
{0, L3, 1200 * 1000},
{0, L4, 1100 * 1000},
{0, L5, 1000 * 1000},
{0, L6, 900 * 1000},
{0, L7, 800 * 1000},
{0, L8, 700 * 1000},
{0, L9, 600 * 1000},
{0, L10, 500 * 1000},
{0, L11, 400 * 1000},
{0, L12, 300 * 1000},
{0, L13, 200 * 1000},
{0, 0, CPUFREQ_TABLE_END},
};
static struct apll_freq *apll_freq_4x12;
static struct apll_freq apll_freq_4212[] = {
/*
* values:
* freq
* clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
* clock divider for COPY, HPM, RESERVED
* PLL M, P, S
*/
APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0),
APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0),
APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0),
APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0),
APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0),
APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0),
APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0),
APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0),
APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1),
APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1),
APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1),
APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1),
APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2),
APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2),
};
static struct apll_freq apll_freq_4412[] = {
/*
* values:
* freq
* clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
* clock divider for COPY, HPM, CORES
* PLL M, P, S
*/
APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0),
APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0),
APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0),
APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0),
APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0),
APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0),
APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0),
APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0),
APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1),
APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1),
APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1),
APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1),
APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2),
APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2),
};
static void exynos4x12_set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
/* Change Divider - CPU0 */
tmp = apll_freq_4x12[div_index].clk_div_cpu0;
__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU)
& 0x11111111)
cpu_relax();
/* Change Divider - CPU1 */
tmp = apll_freq_4x12[div_index].clk_div_cpu1;
__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
do {
cpu_relax();
tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
} while (tmp != 0x0);
}
static void exynos4x12_set_apll(unsigned int index)
{
unsigned int tmp, freq = apll_freq_4x12[index].freq;
/* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
clk_set_parent(moutcore, mout_mpll);
do {
cpu_relax();
tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
tmp &= 0x7;
} while (tmp != 0x2);
clk_set_rate(mout_apll, freq * 1000);
/* MUX_CORE_SEL = APLL */
clk_set_parent(moutcore, mout_apll);
do {
cpu_relax();
tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
}
static void exynos4x12_set_frequency(unsigned int old_index,
unsigned int new_index)
{
if (old_index > new_index) {
exynos4x12_set_clkdiv(new_index);
exynos4x12_set_apll(new_index);
} else if (old_index < new_index) {
exynos4x12_set_apll(new_index);
exynos4x12_set_clkdiv(new_index);
}
}
int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
{
struct device_node *np;
unsigned long rate;
/*
* HACK: This is a temporary workaround to get access to clock
* controller registers directly and remove static mappings and
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
* cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
if (!np) {
pr_err("%s: failed to find clock controller DT node\n",
__func__);
return -ENODEV;
}
info->cmu_regs = of_iomap(np, 0);
if (!info->cmu_regs) {
pr_err("%s: failed to map CMU registers\n", __func__);
return -EFAULT;
}
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
moutcore = clk_get(NULL, "moutcore");
if (IS_ERR(moutcore))
goto err_moutcore;
mout_mpll = clk_get(NULL, "mout_mpll");
if (IS_ERR(mout_mpll))
goto err_mout_mpll;
rate = clk_get_rate(mout_mpll) / 1000;
mout_apll = clk_get(NULL, "mout_apll");
if (IS_ERR(mout_apll))
goto err_mout_apll;
if (info->type == EXYNOS_SOC_4212)
apll_freq_4x12 = apll_freq_4212;
else
apll_freq_4x12 = apll_freq_4412;
info->mpll_freq_khz = rate;
/* 800Mhz */
info->pll_safe_idx = L7;
info->cpu_clk = cpu_clk;
info->volt_table = exynos4x12_volt_table;
info->freq_table = exynos4x12_freq_table;
info->set_freq = exynos4x12_set_frequency;
cpufreq = info;
return 0;
err_mout_apll:
clk_put(mout_mpll);
err_mout_mpll:
clk_put(moutcore);
err_moutcore:
clk_put(cpu_clk);
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
|