Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 | /* linux/drivers/usb/phy/samsung-usbphy.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Praveen Paneri <p.paneri@samsung.com>
*
* Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
* OHCI-EXYNOS controllers.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/usb/otg.h>
#include <linux/usb/samsung_usb_phy.h>
#include <linux/platform_data/samsung-usbphy.h>
/* Register definitions */
#define SAMSUNG_PHYPWR (0x00)
#define PHYPWR_NORMAL_MASK (0x19 << 0)
#define PHYPWR_OTG_DISABLE (0x1 << 4)
#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
/* For Exynos4 */
#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
#define SAMSUNG_PHYCLK (0x04)
#define PHYCLK_MODE_USB11 (0x1 << 6)
#define PHYCLK_EXT_OSC (0x1 << 5)
#define PHYCLK_COMMON_ON_N (0x1 << 4)
#define PHYCLK_ID_PULL (0x1 << 2)
#define PHYCLK_CLKSEL_MASK (0x3 << 0)
#define PHYCLK_CLKSEL_48M (0x0 << 0)
#define PHYCLK_CLKSEL_12M (0x2 << 0)
#define PHYCLK_CLKSEL_24M (0x3 << 0)
#define SAMSUNG_RSTCON (0x08)
#define RSTCON_PHYLINK_SWRST (0x1 << 2)
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19)
#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
#define FSEL_CLKSEL_50M (0x7)
#define FSEL_CLKSEL_24M (0x5)
#define FSEL_CLKSEL_20M (0x4)
#define FSEL_CLKSEL_19200K (0x3)
#define FSEL_CLKSEL_12M (0x2)
#define FSEL_CLKSEL_10M (0x1)
#define FSEL_CLKSEL_9600K (0x0)
#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
#define HOST_CTRL0_RETENABLE (0x1 << 10)
#define HOST_CTRL0_COMMONON_N (0x1 << 9)
#define HOST_CTRL0_SIDDQ (0x1 << 6)
#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
#define HOST_CTRL0_UTMISWRST (0x1 << 2)
#define HOST_CTRL0_LINKSWRST (0x1 << 1)
#define HOST_CTRL0_PHYSWRST (0x1 << 0)
#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23)
#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16)
#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16)
#define HSIC_CTRL_SIDDQ (0x1 << 6)
#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
#define HSIC_CTRL_UTMISWRST (0x1 << 2)
#define HSIC_CTRL_PHYSWRST (0x1 << 0)
#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
#define EXYNOS5_PHY_OTG_SYS (0x38)
#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
#define OTG_SYS_PHY0_SWRST (0x1 << 12)
#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
#define OTG_SYS_COMMON_ON (0x1 << 7)
#define OTG_SYS_FSEL_MASK (0x7 << 4)
#define OTG_SYS_FSEL(_x) ((_x) << 4)
#define OTG_SYS_FORCESLEEP (0x1 << 3)
#define OTG_SYS_OTGDISABLE (0x1 << 2)
#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
#define OTG_SYS_FORCESUSPEND (0x1 << 0)
#define EXYNOS5_PHY_OTG_TUNE (0x40)
#ifndef MHZ
#define MHZ (1000*1000)
#endif
#ifndef KHZ
#define KHZ (1000)
#endif
#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4)
#define S3C64XX_USBPHY_ENABLE (0x1 << 16)
#define EXYNOS_USBPHY_ENABLE (0x1 << 0)
#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0)
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
TYPE_EXYNOS5250,
};
/*
* struct samsung_usbphy_drvdata - driver data for various SoC variants
* @cpu_type: machine identifier
* @devphy_en_mask: device phy enable mask for PHY CONTROL register
* @hostphy_en_mask: host phy enable mask for PHY CONTROL register
* @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
* mapped address of system controller.
* @hostphy_reg_offset: offset to HOST PHY CONTROL register from
* mapped address of system controller.
*
* Here we have a separate mask for device type phy.
* Having different masks for host and device type phy helps
* in setting independent masks in case of SoCs like S5PV210,
* in which PHY0 and PHY1 enable bits belong to same register
* placed at position 0 and 1 respectively.
* Although for newer SoCs like exynos these bits belong to
* different registers altogether placed at position 0.
*/
struct samsung_usbphy_drvdata {
int cpu_type;
int devphy_en_mask;
int hostphy_en_mask;
u32 devphy_reg_offset;
u32 hostphy_reg_offset;
};
/*
* struct samsung_usbphy - transceiver driver state
* @phy: transceiver structure
* @plat: platform data
* @dev: The parent device supplied to the probe function
* @clk: usb phy clock
* @regs: usb phy controller registers memory base
* @pmuregs: USB device PHY_CONTROL register memory base
* @sysreg: USB2.0 PHY_CFG register memory base
* @ref_clk_freq: reference clock frequency selection
* @drv_data: driver data available for different SoCs
* @phy_type: Samsung SoCs specific phy types: #HOST
* #DEVICE
* @phy_usage: usage count for phy
* @lock: lock for phy operations
*/
struct samsung_usbphy {
struct usb_phy phy;
struct samsung_usbphy_data *plat;
struct device *dev;
struct clk *clk;
void __iomem *regs;
void __iomem *pmuregs;
void __iomem *sysreg;
int ref_clk_freq;
const struct samsung_usbphy_drvdata *drv_data;
enum samsung_usb_phy_type phy_type;
atomic_t phy_usage;
spinlock_t lock;
};
#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
{
if (!otg)
return -ENODEV;
if (!otg->host)
otg->host = host;
return 0;
}
static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
{
struct device_node *usbphy_sys;
/* Getting node for system controller interface for usb-phy */
usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
if (!usbphy_sys) {
dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
return -ENODEV;
}
sphy->pmuregs = of_iomap(usbphy_sys, 0);
if (sphy->pmuregs == NULL) {
dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
goto err0;
}
sphy->sysreg = of_iomap(usbphy_sys, 1);
/*
* Not returning error code here, since this situation is not fatal.
* Few SoCs may not have this switch available
*/
if (sphy->sysreg == NULL)
dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
of_node_put(usbphy_sys);
return 0;
err0:
of_node_put(usbphy_sys);
return -ENXIO;
}
/*
* Set isolation here for phy.
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
u32 en_mask = 0;
if (!sphy->pmuregs) {
dev_warn(sphy->dev, "Can't set pmu isolation\n");
return;
}
switch (sphy->drv_data->cpu_type) {
case TYPE_S3C64XX:
/*
* Do nothing: We will add here once S3C64xx goes for DT support
*/
break;
case TYPE_EXYNOS4210:
/*
* Fall through since exynos4210 and exynos5250 have similar
* register architecture: two separate registers for host and
* device phy control with enable bit at position 0.
*/
case TYPE_EXYNOS5250:
if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
reg = sphy->pmuregs +
sphy->drv_data->devphy_reg_offset;
en_mask = sphy->drv_data->devphy_en_mask;
} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
reg = sphy->pmuregs +
sphy->drv_data->hostphy_reg_offset;
en_mask = sphy->drv_data->hostphy_en_mask;
}
break;
default:
dev_err(sphy->dev, "Invalid SoC type\n");
return;
}
reg_val = readl(reg);
if (on)
reg_val &= ~en_mask;
else
reg_val |= en_mask;
writel(reg_val, reg);
}
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
*/
static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
{
u32 reg;
if (!sphy->sysreg) {
dev_warn(sphy->dev, "Can't configure specified phy mode\n");
return;
}
reg = readl(sphy->sysreg);
if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
else if (sphy->phy_type == USB_PHY_TYPE_HOST)
reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
writel(reg, sphy->sysreg);
}
/*
* PHYs are different for USB Device and USB Host.
* This make sure that correct PHY type is selected before
* any operation on PHY.
*/
static int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type)
{
struct samsung_usbphy *sphy = phy_to_sphy(phy);
sphy->phy_type = phy_type;
return 0;
}
/*
* Returns reference clock frequency selection value
*/
static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
{
struct clk *ref_clk;
int refclk_freq = 0;
/*
* In exynos5250 USB host and device PHY use
* external crystal clock XXTI
*/
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
ref_clk = clk_get(sphy->dev, "ext_xtal");
else
ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
/* set clock frequency for PLL */
switch (clk_get_rate(ref_clk)) {
case 9600 * KHZ:
refclk_freq = FSEL_CLKSEL_9600K;
break;
case 10 * MHZ:
refclk_freq = FSEL_CLKSEL_10M;
break;
case 12 * MHZ:
refclk_freq = FSEL_CLKSEL_12M;
break;
case 19200 * KHZ:
refclk_freq = FSEL_CLKSEL_19200K;
break;
case 20 * MHZ:
refclk_freq = FSEL_CLKSEL_20M;
break;
case 50 * MHZ:
refclk_freq = FSEL_CLKSEL_50M;
break;
case 24 * MHZ:
default:
/* default reference clock */
refclk_freq = FSEL_CLKSEL_24M;
break;
}
} else {
switch (clk_get_rate(ref_clk)) {
case 12 * MHZ:
refclk_freq = PHYCLK_CLKSEL_12M;
break;
case 24 * MHZ:
refclk_freq = PHYCLK_CLKSEL_24M;
break;
case 48 * MHZ:
refclk_freq = PHYCLK_CLKSEL_48M;
break;
default:
if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
refclk_freq = PHYCLK_CLKSEL_48M;
else
refclk_freq = PHYCLK_CLKSEL_24M;
break;
}
}
clk_put(ref_clk);
return refclk_freq;
}
static bool exynos5_phyhost_is_on(void *regs)
{
u32 reg;
reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
return !(reg & HOST_CTRL0_SIDDQ);
}
static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phyclk = sphy->ref_clk_freq;
u32 phyhost;
u32 phyotg;
u32 phyhsic;
u32 ehcictrl;
u32 ohcictrl;
/*
* phy_usage helps in keeping usage count for phy
* so that the first consumer enabling the phy is also
* the last consumer to disable it.
*/
atomic_inc(&sphy->phy_usage);
if (exynos5_phyhost_is_on(regs)) {
dev_info(sphy->dev, "Already power on PHY\n");
return;
}
/* Host configuration */
phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
/* phy reference clock configuration */
phyhost &= ~HOST_CTRL0_FSEL_MASK;
phyhost |= HOST_CTRL0_FSEL(phyclk);
/* host phy reset */
phyhost &= ~(HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
/* Enable normal mode of operation */
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
/* Link reset */
phyhost |= (HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST |
/* COMMON Block configuration during suspend */
HOST_CTRL0_COMMONON_N);
writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
udelay(10);
phyhost &= ~(HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
/* OTG configuration */
phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
/* phy reference clock configuration */
phyotg &= ~OTG_SYS_FSEL_MASK;
phyotg |= OTG_SYS_FSEL(phyclk);
/* Enable normal mode of operation */
phyotg &= ~(OTG_SYS_FORCESUSPEND |
OTG_SYS_SIDDQ_UOTG |
OTG_SYS_FORCESLEEP |
OTG_SYS_REFCLKSEL_MASK |
/* COMMON Block configuration during suspend */
OTG_SYS_COMMON_ON);
/* OTG phy & link reset */
phyotg |= (OTG_SYS_PHY0_SWRST |
OTG_SYS_LINKSWRST_UOTG |
OTG_SYS_PHYLINK_SWRESET |
OTG_SYS_OTGDISABLE |
/* Set phy refclk */
OTG_SYS_REFCLKSEL_CLKCORE);
writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
udelay(10);
phyotg &= ~(OTG_SYS_PHY0_SWRST |
OTG_SYS_LINKSWRST_UOTG |
OTG_SYS_PHYLINK_SWRESET);
writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
/* HSIC phy configuration */
phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
HSIC_CTRL_REFCLKSEL |
HSIC_CTRL_PHYSWRST);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
udelay(10);
phyhsic &= ~HSIC_CTRL_PHYSWRST;
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
udelay(80);
/* enable EHCI DMA burst */
ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
HOST_EHCICTRL_ENAINCR4 |
HOST_EHCICTRL_ENAINCR8 |
HOST_EHCICTRL_ENAINCR16);
writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
/* set ohci_suspend_on_n */
ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
}
static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phypwr;
u32 phyclk;
u32 rstcon;
/* set clock frequency for PLL */
phyclk = sphy->ref_clk_freq;
phypwr = readl(regs + SAMSUNG_PHYPWR);
rstcon = readl(regs + SAMSUNG_RSTCON);
switch (sphy->drv_data->cpu_type) {
case TYPE_S3C64XX:
phyclk &= ~PHYCLK_COMMON_ON_N;
phypwr &= ~PHYPWR_NORMAL_MASK;
rstcon |= RSTCON_SWRST;
break;
case TYPE_EXYNOS4210:
phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
rstcon |= RSTCON_SWRST;
default:
break;
}
writel(phyclk, regs + SAMSUNG_PHYCLK);
/* Configure PHY0 for normal operation*/
writel(phypwr, regs + SAMSUNG_PHYPWR);
/* reset all ports of PHY and Link */
writel(rstcon, regs + SAMSUNG_RSTCON);
udelay(10);
rstcon &= ~RSTCON_SWRST;
writel(rstcon, regs + SAMSUNG_RSTCON);
}
static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phyhost;
u32 phyotg;
u32 phyhsic;
if (atomic_dec_return(&sphy->phy_usage) > 0) {
dev_info(sphy->dev, "still being used\n");
return;
}
phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
HSIC_CTRL_REFCLKSEL |
HSIC_CTRL_SIDDQ |
HSIC_CTRL_FORCESLEEP |
HSIC_CTRL_FORCESUSPEND);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
phyhost |= (HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP |
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL);
writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
phyotg |= (OTG_SYS_FORCESUSPEND |
OTG_SYS_SIDDQ_UOTG |
OTG_SYS_FORCESLEEP);
writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
}
static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phypwr;
phypwr = readl(regs + SAMSUNG_PHYPWR);
switch (sphy->drv_data->cpu_type) {
case TYPE_S3C64XX:
phypwr |= PHYPWR_NORMAL_MASK;
break;
case TYPE_EXYNOS4210:
phypwr |= PHYPWR_NORMAL_MASK_PHY0;
default:
break;
}
/* Disable analog and otg block power */
writel(phypwr, regs + SAMSUNG_PHYPWR);
}
/*
* The function passed to the usb driver for phy initialization
*/
static int samsung_usbphy_init(struct usb_phy *phy)
{
struct samsung_usbphy *sphy;
struct usb_bus *host = NULL;
unsigned long flags;
int ret = 0;
sphy = phy_to_sphy(phy);
host = phy->otg->host;
/* Enable the phy clock */
ret = clk_prepare_enable(sphy->clk);
if (ret) {
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
return ret;
}
spin_lock_irqsave(&sphy->lock, flags);
if (host) {
/* setting default phy-type for USB 2.0 */
if (!strstr(dev_name(host->controller), "ehci") ||
!strstr(dev_name(host->controller), "ohci"))
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
} else {
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
}
/* Disable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
else
samsung_usbphy_set_isolation(sphy, false);
/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
samsung_usbphy_cfg_sel(sphy);
/* Initialize usb phy registers */
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
samsung_exynos5_usbphy_enable(sphy);
else
samsung_usbphy_enable(sphy);
spin_unlock_irqrestore(&sphy->lock, flags);
/* Disable the phy clock */
clk_disable_unprepare(sphy->clk);
return ret;
}
/*
* The function passed to the usb driver for phy shutdown
*/
static void samsung_usbphy_shutdown(struct usb_phy *phy)
{
struct samsung_usbphy *sphy;
struct usb_bus *host = NULL;
unsigned long flags;
sphy = phy_to_sphy(phy);
host = phy->otg->host;
if (clk_prepare_enable(sphy->clk)) {
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
return;
}
spin_lock_irqsave(&sphy->lock, flags);
if (host) {
/* setting default phy-type for USB 2.0 */
if (!strstr(dev_name(host->controller), "ehci") ||
!strstr(dev_name(host->controller), "ohci"))
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
} else {
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
}
/* De-initialize usb phy registers */
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
samsung_exynos5_usbphy_disable(sphy);
else
samsung_usbphy_disable(sphy);
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(true);
else
samsung_usbphy_set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
clk_disable_unprepare(sphy->clk);
}
static const struct of_device_id samsung_usbphy_dt_match[];
static inline const struct samsung_usbphy_drvdata
*samsung_usbphy_get_driver_data(struct platform_device *pdev)
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(samsung_usbphy_dt_match,
pdev->dev.of_node);
return match->data;
}
return (struct samsung_usbphy_drvdata *)
platform_get_device_id(pdev)->driver_data;
}
static int samsung_usbphy_probe(struct platform_device *pdev)
{
struct samsung_usbphy *sphy;
struct usb_otg *otg;
struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
const struct samsung_usbphy_drvdata *drv_data;
struct device *dev = &pdev->dev;
struct resource *phy_mem;
void __iomem *phy_base;
struct clk *clk;
int ret;
phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!phy_mem) {
dev_err(dev, "%s: missing mem resource\n", __func__);
return -ENODEV;
}
phy_base = devm_request_and_ioremap(dev, phy_mem);
if (!phy_base) {
dev_err(dev, "%s: register mapping failed\n", __func__);
return -ENXIO;
}
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
if (!sphy)
return -ENOMEM;
otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
if (!otg)
return -ENOMEM;
drv_data = samsung_usbphy_get_driver_data(pdev);
if (drv_data->cpu_type == TYPE_EXYNOS5250)
clk = devm_clk_get(dev, "usbhost");
else
clk = devm_clk_get(dev, "otg");
if (IS_ERR(clk)) {
dev_err(dev, "Failed to get otg clock\n");
return PTR_ERR(clk);
}
sphy->dev = dev;
if (dev->of_node) {
ret = samsung_usbphy_parse_dt(sphy);
if (ret < 0)
return ret;
} else {
if (!pdata) {
dev_err(dev, "no platform data specified\n");
return -EINVAL;
}
}
sphy->plat = pdata;
sphy->regs = phy_base;
sphy->clk = clk;
sphy->drv_data = drv_data;
sphy->phy.dev = sphy->dev;
sphy->phy.label = "samsung-usbphy";
sphy->phy.init = samsung_usbphy_init;
sphy->phy.shutdown = samsung_usbphy_shutdown;
sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
sphy->phy.otg = otg;
sphy->phy.otg->phy = &sphy->phy;
sphy->phy.otg->set_host = samsung_usbphy_set_host;
spin_lock_init(&sphy->lock);
platform_set_drvdata(pdev, sphy);
return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
}
static int samsung_usbphy_remove(struct platform_device *pdev)
{
struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
usb_remove_phy(&sphy->phy);
if (sphy->pmuregs)
iounmap(sphy->pmuregs);
if (sphy->sysreg)
iounmap(sphy->sysreg);
return 0;
}
static const struct samsung_usbphy_drvdata usbphy_s3c64xx = {
.cpu_type = TYPE_S3C64XX,
.devphy_en_mask = S3C64XX_USBPHY_ENABLE,
};
static const struct samsung_usbphy_drvdata usbphy_exynos4 = {
.cpu_type = TYPE_EXYNOS4210,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
};
static struct samsung_usbphy_drvdata usbphy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
};
#ifdef CONFIG_OF
static const struct of_device_id samsung_usbphy_dt_match[] = {
{
.compatible = "samsung,s3c64xx-usbphy",
.data = &usbphy_s3c64xx,
}, {
.compatible = "samsung,exynos4210-usbphy",
.data = &usbphy_exynos4,
}, {
.compatible = "samsung,exynos5250-usbphy",
.data = &usbphy_exynos5
},
{},
};
MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
#endif
static struct platform_device_id samsung_usbphy_driver_ids[] = {
{
.name = "s3c64xx-usbphy",
.driver_data = (unsigned long)&usbphy_s3c64xx,
}, {
.name = "exynos4210-usbphy",
.driver_data = (unsigned long)&usbphy_exynos4,
}, {
.name = "exynos5250-usbphy",
.driver_data = (unsigned long)&usbphy_exynos5,
},
{},
};
MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
static struct platform_driver samsung_usbphy_driver = {
.probe = samsung_usbphy_probe,
.remove = samsung_usbphy_remove,
.id_table = samsung_usbphy_driver_ids,
.driver = {
.name = "samsung-usbphy",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
},
};
module_platform_driver(samsung_usbphy_driver);
MODULE_DESCRIPTION("Samsung USB phy controller");
MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:samsung-usbphy");
|