Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 | /*
comedi/drivers/dt2817.c
Hardware driver for Data Translation DT2817
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 1998 David A. Schleef <ds@schleef.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
Driver: dt2817
Description: Data Translation DT2817
Author: ds
Status: complete
Devices: [Data Translation] DT2817 (dt2817)
A very simple digital I/O card. Four banks of 8 lines, each bank
is configurable for input or output. One wonders why it takes a
50 page manual to describe this thing.
The driver (which, btw, is much less than 50 pages) has 1 subdevice
with 32 channels, configurable in groups of 8.
Configuration options:
[0] - I/O port base base address
*/
#include "../comedidev.h"
#include <linux/ioport.h>
#define DT2817_SIZE 5
#define DT2817_CR 0
#define DT2817_DATA 1
static int dt2817_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
int mask;
int chan;
int oe = 0;
if (insn->n != 1)
return -EINVAL;
chan = CR_CHAN(insn->chanspec);
if (chan < 8)
mask = 0xff;
else if (chan < 16)
mask = 0xff00;
else if (chan < 24)
mask = 0xff0000;
else
mask = 0xff000000;
if (data[0])
s->io_bits |= mask;
else
s->io_bits &= ~mask;
if (s->io_bits & 0x000000ff)
oe |= 0x1;
if (s->io_bits & 0x0000ff00)
oe |= 0x2;
if (s->io_bits & 0x00ff0000)
oe |= 0x4;
if (s->io_bits & 0xff000000)
oe |= 0x8;
outb(oe, dev->iobase + DT2817_CR);
return 1;
}
static int dt2817_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
unsigned int changed;
/* It's questionable whether it is more important in
* a driver like this to be deterministic or fast.
* We choose fast. */
if (data[0]) {
changed = s->state;
s->state &= ~data[0];
s->state |= (data[0] & data[1]);
changed ^= s->state;
changed &= s->io_bits;
if (changed & 0x000000ff)
outb(s->state & 0xff, dev->iobase + DT2817_DATA + 0);
if (changed & 0x0000ff00)
outb((s->state >> 8) & 0xff,
dev->iobase + DT2817_DATA + 1);
if (changed & 0x00ff0000)
outb((s->state >> 16) & 0xff,
dev->iobase + DT2817_DATA + 2);
if (changed & 0xff000000)
outb((s->state >> 24) & 0xff,
dev->iobase + DT2817_DATA + 3);
}
data[1] = inb(dev->iobase + DT2817_DATA + 0);
data[1] |= (inb(dev->iobase + DT2817_DATA + 1) << 8);
data[1] |= (inb(dev->iobase + DT2817_DATA + 2) << 16);
data[1] |= (inb(dev->iobase + DT2817_DATA + 3) << 24);
return insn->n;
}
static int dt2817_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
int ret;
struct comedi_subdevice *s;
unsigned long iobase;
iobase = it->options[0];
printk(KERN_INFO "comedi%d: dt2817: 0x%04lx ", dev->minor, iobase);
if (!request_region(iobase, DT2817_SIZE, "dt2817")) {
printk("I/O port conflict\n");
return -EIO;
}
dev->iobase = iobase;
dev->board_name = "dt2817";
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
return ret;
s = &dev->subdevices[0];
s->n_chan = 32;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->range_table = &range_digital;
s->maxdata = 1;
s->insn_bits = dt2817_dio_insn_bits;
s->insn_config = dt2817_dio_insn_config;
s->state = 0;
outb(0, dev->iobase + DT2817_CR);
printk(KERN_INFO "\n");
return 0;
}
static void dt2817_detach(struct comedi_device *dev)
{
if (dev->iobase)
release_region(dev->iobase, DT2817_SIZE);
}
static struct comedi_driver dt2817_driver = {
.driver_name = "dt2817",
.module = THIS_MODULE,
.attach = dt2817_attach,
.detach = dt2817_detach,
};
module_comedi_driver(dt2817_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
|