Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 | /*
* lm3533-ctrlbank.c -- LM3533 Generic Control Bank interface
*
* Copyright (C) 2011-2012 Texas Instruments
*
* Author: Johan Hovold <jhovold@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/mfd/lm3533.h>
#define LM3533_MAX_CURRENT_MIN 5000
#define LM3533_MAX_CURRENT_MAX 29800
#define LM3533_MAX_CURRENT_STEP 800
#define LM3533_BRIGHTNESS_MAX 255
#define LM3533_PWM_MAX 0x3f
#define LM3533_REG_PWM_BASE 0x14
#define LM3533_REG_MAX_CURRENT_BASE 0x1f
#define LM3533_REG_CTRLBANK_ENABLE 0x27
#define LM3533_REG_BRIGHTNESS_BASE 0x40
static inline u8 lm3533_ctrlbank_get_reg(struct lm3533_ctrlbank *cb, u8 base)
{
return base + cb->id;
}
int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb)
{
u8 mask;
int ret;
dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
mask = 1 << cb->id;
ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE,
mask, mask);
if (ret)
dev_err(cb->dev, "failed to enable ctrlbank %d\n", cb->id);
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_enable);
int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb)
{
u8 mask;
int ret;
dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
mask = 1 << cb->id;
ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE, 0, mask);
if (ret)
dev_err(cb->dev, "failed to disable ctrlbank %d\n", cb->id);
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_disable);
/*
* Full-scale current.
*
* imax 5000 - 29800 uA (800 uA step)
*/
int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax)
{
u8 reg;
u8 val;
int ret;
if (imax < LM3533_MAX_CURRENT_MIN || imax > LM3533_MAX_CURRENT_MAX)
return -EINVAL;
val = (imax - LM3533_MAX_CURRENT_MIN) / LM3533_MAX_CURRENT_STEP;
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_MAX_CURRENT_BASE);
ret = lm3533_write(cb->lm3533, reg, val);
if (ret)
dev_err(cb->dev, "failed to set max current\n");
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_max_current);
#define lm3533_ctrlbank_set(_name, _NAME) \
int lm3533_ctrlbank_set_##_name(struct lm3533_ctrlbank *cb, u8 val) \
{ \
u8 reg; \
int ret; \
\
if (val > LM3533_##_NAME##_MAX) \
return -EINVAL; \
\
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \
ret = lm3533_write(cb->lm3533, reg, val); \
if (ret) \
dev_err(cb->dev, "failed to set " #_name "\n"); \
\
return ret; \
} \
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_##_name);
#define lm3533_ctrlbank_get(_name, _NAME) \
int lm3533_ctrlbank_get_##_name(struct lm3533_ctrlbank *cb, u8 *val) \
{ \
u8 reg; \
int ret; \
\
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \
ret = lm3533_read(cb->lm3533, reg, val); \
if (ret) \
dev_err(cb->dev, "failed to get " #_name "\n"); \
\
return ret; \
} \
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_##_name);
lm3533_ctrlbank_set(brightness, BRIGHTNESS);
lm3533_ctrlbank_get(brightness, BRIGHTNESS);
/*
* PWM-input control mask:
*
* bit 5 - PWM-input enabled in Zone 4
* bit 4 - PWM-input enabled in Zone 3
* bit 3 - PWM-input enabled in Zone 2
* bit 2 - PWM-input enabled in Zone 1
* bit 1 - PWM-input enabled in Zone 0
* bit 0 - PWM-input enabled
*/
lm3533_ctrlbank_set(pwm, PWM);
lm3533_ctrlbank_get(pwm, PWM);
MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>");
MODULE_DESCRIPTION("LM3533 Control Bank interface");
MODULE_LICENSE("GPL");
|