Free Electrons

Embedded Linux Experts

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
/*
 * Support for Moorestown/Medfield I2C chip
 *
 * Copyright (c) 2009 Intel Corporation.
 * Copyright (c) 2009 Synopsys. Inc.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License, version
 * 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT ANY
 * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 * FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc., 51
 * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/io.h>

#define DRIVER_NAME	"i2c-intel-mid"
#define VERSION		"Version 0.5ac2"
#define PLATFORM	"Moorestown/Medfield"

/* Tables use: 0 Moorestown, 1 Medfield */
#define NUM_PLATFORMS	2
enum platform_enum {
	MOORESTOWN = 0,
	MEDFIELD = 1,
};

enum mid_i2c_status {
	STATUS_IDLE = 0,
	STATUS_READ_START,
	STATUS_READ_IN_PROGRESS,
	STATUS_READ_SUCCESS,
	STATUS_WRITE_START,
	STATUS_WRITE_SUCCESS,
	STATUS_XFER_ABORT,
	STATUS_STANDBY
};

/**
 * struct intel_mid_i2c_private	- per device I²C context
 * @adap: core i2c layer adapter information
 * @dev: device reference for power management
 * @base: register base
 * @speed: speed mode for this port
 * @complete: completion object for transaction wait
 * @abort: reason for last abort
 * @rx_buf: pointer into working receive buffer
 * @rx_buf_len: receive buffer length
 * @status: adapter state machine
 * @msg: the message we are currently processing
 * @platform: the MID device type we are part of
 * @lock: transaction serialization
 *
 * We allocate one of these per device we discover, it holds the core
 * i2c layer objects and the data we need to track privately.
 */
struct intel_mid_i2c_private {
	struct i2c_adapter adap;
	struct device *dev;
	void __iomem *base;
	int speed;
	struct completion complete;
	int abort;
	u8 *rx_buf;
	int rx_buf_len;
	enum mid_i2c_status status;
	struct i2c_msg *msg;
	enum platform_enum platform;
	struct mutex lock;
};

#define NUM_SPEEDS		3

#define ACTIVE			0
#define STANDBY			1


/* Control register */
#define IC_CON			0x00
#define SLV_DIS			(1 << 6)	/* Disable slave mode */
#define RESTART			(1 << 5)	/* Send a Restart condition */
#define	ADDR_10BIT		(1 << 4)	/* 10-bit addressing */
#define	STANDARD_MODE		(1 << 1)	/* standard mode */
#define FAST_MODE		(2 << 1)	/* fast mode */
#define HIGH_MODE		(3 << 1)	/* high speed mode */
#define	MASTER_EN		(1 << 0)	/* Master mode */

/* Target address register */
#define IC_TAR			0x04
#define IC_TAR_10BIT_ADDR	(1 << 12)	/* 10-bit addressing */
#define IC_TAR_SPECIAL		(1 << 11)	/* Perform special I2C cmd */
#define IC_TAR_GC_OR_START	(1 << 10)	/* 0: Gerneral Call Address */
						/* 1: START BYTE */
/* Slave Address Register */
#define IC_SAR			0x08		/* Not used in Master mode */

/* High Speed Master Mode Code Address Register */
#define IC_HS_MADDR		0x0c

/* Rx/Tx Data Buffer and Command Register */
#define IC_DATA_CMD		0x10
#define IC_RD			(1 << 8)	/* 1: Read 0: Write */

/* Standard Speed Clock SCL High Count Register */
#define IC_SS_SCL_HCNT		0x14

/* Standard Speed Clock SCL Low Count Register */
#define IC_SS_SCL_LCNT		0x18

/* Fast Speed Clock SCL High Count Register */
#define IC_FS_SCL_HCNT		0x1c

/* Fast Spedd Clock SCL Low Count Register */
#define IC_FS_SCL_LCNT		0x20

/* High Speed Clock SCL High Count Register */
#define IC_HS_SCL_HCNT		0x24

/* High Speed Clock SCL Low Count Register */
#define IC_HS_SCL_LCNT		0x28

/* Interrupt Status Register */
#define IC_INTR_STAT		0x2c		/* Read only */
#define R_GEN_CALL		(1 << 11)
#define R_START_DET		(1 << 10)
#define R_STOP_DET		(1 << 9)
#define R_ACTIVITY		(1 << 8)
#define R_RX_DONE		(1 << 7)
#define	R_TX_ABRT		(1 << 6)
#define R_RD_REQ		(1 << 5)
#define R_TX_EMPTY		(1 << 4)
#define R_TX_OVER		(1 << 3)
#define	R_RX_FULL		(1 << 2)
#define	R_RX_OVER		(1 << 1)
#define R_RX_UNDER		(1 << 0)

/* Interrupt Mask Register */
#define IC_INTR_MASK		0x30		/* Read and Write */
#define M_GEN_CALL		(1 << 11)
#define M_START_DET		(1 << 10)
#define M_STOP_DET		(1 << 9)
#define M_ACTIVITY		(1 << 8)
#define M_RX_DONE		(1 << 7)
#define	M_TX_ABRT		(1 << 6)
#define M_RD_REQ		(1 << 5)
#define M_TX_EMPTY		(1 << 4)
#define M_TX_OVER		(1 << 3)
#define	M_RX_FULL		(1 << 2)
#define	M_RX_OVER		(1 << 1)
#define M_RX_UNDER		(1 << 0)

/* Raw Interrupt Status Register */
#define IC_RAW_INTR_STAT	0x34		/* Read Only */
#define GEN_CALL		(1 << 11)	/* General call */
#define START_DET		(1 << 10)	/* (RE)START occurred */
#define STOP_DET		(1 << 9)	/* STOP occurred */
#define ACTIVITY		(1 << 8)	/* Bus busy */
#define RX_DONE			(1 << 7)	/* Not used in Master mode */
#define	TX_ABRT			(1 << 6)	/* Transmit Abort */
#define RD_REQ			(1 << 5)	/* Not used in Master mode */
#define TX_EMPTY		(1 << 4)	/* TX FIFO <= threshold */
#define TX_OVER			(1 << 3)	/* TX FIFO overflow */
#define	RX_FULL			(1 << 2)	/* RX FIFO >= threshold */
#define	RX_OVER			(1 << 1)	/* RX FIFO overflow */
#define RX_UNDER		(1 << 0)	/* RX FIFO empty */

/* Receive FIFO Threshold Register */
#define IC_RX_TL		0x38

/* Transmit FIFO Treshold Register */
#define IC_TX_TL		0x3c

/* Clear Combined and Individual Interrupt Register */
#define IC_CLR_INTR		0x40
#define CLR_INTR		(1 << 0)

/* Clear RX_UNDER Interrupt Register */
#define IC_CLR_RX_UNDER		0x44
#define CLR_RX_UNDER		(1 << 0)

/* Clear RX_OVER Interrupt Register */
#define IC_CLR_RX_OVER		0x48
#define CLR_RX_OVER		(1 << 0)

/* Clear TX_OVER Interrupt Register */
#define IC_CLR_TX_OVER		0x4c
#define CLR_TX_OVER		(1 << 0)

#define IC_CLR_RD_REQ		0x50

/* Clear TX_ABRT Interrupt Register */
#define IC_CLR_TX_ABRT		0x54
#define CLR_TX_ABRT		(1 << 0)
#define IC_CLR_RX_DONE		0x58

/* Clear ACTIVITY Interrupt Register */
#define IC_CLR_ACTIVITY		0x5c
#define CLR_ACTIVITY		(1 << 0)

/* Clear STOP_DET Interrupt Register */
#define IC_CLR_STOP_DET		0x60
#define CLR_STOP_DET		(1 << 0)

/* Clear START_DET Interrupt Register */
#define IC_CLR_START_DET	0x64
#define CLR_START_DET		(1 << 0)

/* Clear GEN_CALL Interrupt Register */
#define IC_CLR_GEN_CALL		0x68
#define CLR_GEN_CALL		(1 << 0)

/* Enable Register */
#define IC_ENABLE		0x6c
#define ENABLE			(1 << 0)

/* Status Register */
#define IC_STATUS		0x70		/* Read Only */
#define STAT_SLV_ACTIVITY	(1 << 6)	/* Slave not in idle */
#define STAT_MST_ACTIVITY	(1 << 5)	/* Master not in idle */
#define STAT_RFF		(1 << 4)	/* RX FIFO Full */
#define STAT_RFNE		(1 << 3)	/* RX FIFO Not Empty */
#define STAT_TFE		(1 << 2)	/* TX FIFO Empty */
#define STAT_TFNF		(1 << 1)	/* TX FIFO Not Full */
#define STAT_ACTIVITY		(1 << 0)	/* Activity Status */

/* Transmit FIFO Level Register */
#define IC_TXFLR		0x74		/* Read Only */
#define TXFLR			(1 << 0)	/* TX FIFO level */

/* Receive FIFO Level Register */
#define IC_RXFLR		0x78		/* Read Only */
#define RXFLR			(1 << 0)	/* RX FIFO level */

/* Transmit Abort Source Register */
#define IC_TX_ABRT_SOURCE	0x80
#define ABRT_SLVRD_INTX		(1 << 15)
#define ABRT_SLV_ARBLOST	(1 << 14)
#define ABRT_SLVFLUSH_TXFIFO	(1 << 13)
#define	ARB_LOST		(1 << 12)
#define ABRT_MASTER_DIS		(1 << 11)
#define ABRT_10B_RD_NORSTRT	(1 << 10)
#define ABRT_SBYTE_NORSTRT	(1 << 9)
#define ABRT_HS_NORSTRT		(1 << 8)
#define ABRT_SBYTE_ACKDET	(1 << 7)
#define ABRT_HS_ACKDET		(1 << 6)
#define ABRT_GCALL_READ		(1 << 5)
#define ABRT_GCALL_NOACK	(1 << 4)
#define ABRT_TXDATA_NOACK	(1 << 3)
#define ABRT_10ADDR2_NOACK	(1 << 2)
#define ABRT_10ADDR1_NOACK	(1 << 1)
#define ABRT_7B_ADDR_NOACK	(1 << 0)

/* Enable Status Register */
#define IC_ENABLE_STATUS	0x9c
#define IC_EN			(1 << 0)	/* I2C in an enabled state */

/* Component Parameter Register 1*/
#define IC_COMP_PARAM_1		0xf4
#define APB_DATA_WIDTH		(0x3 << 0)

/* added by xiaolin --begin */
#define SS_MIN_SCL_HIGH         4000
#define SS_MIN_SCL_LOW          4700
#define FS_MIN_SCL_HIGH         600
#define FS_MIN_SCL_LOW          1300
#define HS_MIN_SCL_HIGH_100PF   60
#define HS_MIN_SCL_LOW_100PF    120

#define STANDARD		0
#define FAST			1
#define HIGH			2

#define NUM_SPEEDS		3

static int speed_mode[6] = {
	FAST,
	FAST,
	FAST,
	STANDARD,
	FAST,
	FAST
};

static int ctl_num = 6;
module_param_array(speed_mode, int, &ctl_num, S_IRUGO);
MODULE_PARM_DESC(speed_mode, "Set the speed of the i2c interface (0-2)");

/**
 * intel_mid_i2c_disable - Disable I2C controller
 * @adap: struct pointer to i2c_adapter
 *
 * Return Value:
 * 0		success
 * -EBUSY	if device is busy
 * -ETIMEDOUT	if i2c cannot be disabled within the given time
 *
 * I2C bus state should be checked prior to disabling the hardware. If bus is
 * not in idle state, an errno is returned. Write "0" to IC_ENABLE to disable
 * I2C controller.
 */
static int intel_mid_i2c_disable(struct i2c_adapter *adap)
{
	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
	int err = 0;
	int count = 0;
	int ret1, ret2;
	static const u16 delay[NUM_SPEEDS] = {100, 25, 3};

	/* Set IC_ENABLE to 0 */
	writel(0, i2c->base + IC_ENABLE);

	/* Check if device is busy */
	dev_dbg(&adap->dev, "mrst i2c disable\n");
	while ((ret1 = readl(i2c->base + IC_ENABLE_STATUS) & 0x1)
		|| (ret2 = readl(i2c->base + IC_STATUS) & 0x1)) {
		udelay(delay[i2c->speed]);
		writel(0, i2c->base + IC_ENABLE);
		dev_dbg(&adap->dev, "i2c is busy, count is %d speed %d\n",
			count, i2c->speed);
		if (count++ > 10) {
			err = -ETIMEDOUT;
			break;
		}
	}

	/* Clear all interrupts */
	readl(i2c->base + IC_CLR_INTR);
	readl(i2c->base + IC_CLR_STOP_DET);
	readl(i2c->base + IC_CLR_START_DET);
	readl(i2c->base + IC_CLR_ACTIVITY);
	readl(i2c->base + IC_CLR_TX_ABRT);
	readl(i2c->base + IC_CLR_RX_OVER);
	readl(i2c->base + IC_CLR_RX_UNDER);
	readl(i2c->base + IC_CLR_TX_OVER);
	readl(i2c->base + IC_CLR_RX_DONE);
	readl(i2c->base + IC_CLR_GEN_CALL);

	/* Disable all interupts */
	writel(0x0000, i2c->base + IC_INTR_MASK);

	return err;
}

/**
 * intel_mid_i2c_hwinit - Initialize the I2C hardware registers
 * @dev: pci device struct pointer
 *
 * This function will be called in intel_mid_i2c_probe() before device
 * registration.
 *
 * Return Values:
 * 0		success
 * -EBUSY	i2c cannot be disabled
 * -ETIMEDOUT	i2c cannot be disabled
 * -EFAULT	If APB data width is not 32-bit wide
 *
 * I2C should be disabled prior to other register operation. If failed, an
 * errno is returned. Mask and Clear all interrpts, this should be done at
 * first.  Set common registers which will not be modified during normal
 * transfers, including: control register, FIFO threshold and clock freq.
 * Check APB data width at last.
 */
static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
{
	int err;

	static const u16 hcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
		{ 0x75,  0x15, 0x07 },
		{ 0x04c,  0x10, 0x06 }
	};
	static const u16 lcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
		{ 0x7C,  0x21, 0x0E },
		{ 0x053, 0x19, 0x0F }
	};

	/* Disable i2c first */
	err = intel_mid_i2c_disable(&i2c->adap);
	if (err)
		return err;

	/*
	 * Setup clock frequency and speed mode
	 * Enable restart condition,
	 * enable master FSM, disable slave FSM,
	 * use target address when initiating transfer
	 */

	writel((i2c->speed + 1) << 1 | SLV_DIS | RESTART | MASTER_EN,
		i2c->base + IC_CON);
	writel(hcnt[i2c->platform][i2c->speed],
		i2c->base + (IC_SS_SCL_HCNT + (i2c->speed << 3)));
	writel(lcnt[i2c->platform][i2c->speed],
		i2c->base + (IC_SS_SCL_LCNT + (i2c->speed << 3)));

	/* Set tranmit & receive FIFO threshold to zero */
	writel(0x0, i2c->base + IC_RX_TL);
	writel(0x0, i2c->base + IC_TX_TL);

	return 0;
}

/**
 * intel_mid_i2c_func - Return the supported three I2C operations.
 * @adapter: i2c_adapter struct pointer
 */
static u32 intel_mid_i2c_func(struct i2c_adapter *adapter)
{
	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
}

/**
 * intel_mid_i2c_address_neq - To check if the addresses for different i2c messages
 * are equal.
 * @p1: first i2c_msg
 * @p2: second i2c_msg
 *
 * Return Values:
 * 0	 if addresses are equal
 * 1	 if not equal
 *
 * Within a single transfer, the I2C client may need to send its address more
 * than once. So a check if the addresses match is needed.
 */
static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
				       const struct i2c_msg *p2)
{
	if (p1->addr != p2->addr)
		return 1;
	if ((p1->flags ^ p2->flags) & I2C_M_TEN)
		return 1;
	return 0;
}

/**
 * intel_mid_i2c_abort - To handle transfer abortions and print error messages.
 * @adap: i2c_adapter struct pointer
 *
 * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
 * distingushed. At present, no circumstances have been found out that
 * multiple errors would be occurred simutaneously, so we simply use the
 * register value directly.
 *
 * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
 * a few extra steps)
 */
static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
{
	/* Read about source register */
	int abort = i2c->abort;
	struct i2c_adapter *adap = &i2c->adap;

	/* Single transfer error check:
	 * According to databook, TX/RX FIFOs would be flushed when
	 * the abort interrupt occurred.
	 */
	if (abort & ABRT_MASTER_DIS)
		dev_err(&adap->dev,
		"initiate master operation with master mode disabled.\n");
	if (abort & ABRT_10B_RD_NORSTRT)
		dev_err(&adap->dev,
	"RESTART disabled and master sent READ cmd in 10-bit addressing.\n");

	if (abort & ABRT_SBYTE_NORSTRT) {
		dev_err(&adap->dev,
		"RESTART disabled and user is trying to send START byte.\n");
		writel(~ABRT_SBYTE_NORSTRT, i2c->base + IC_TX_ABRT_SOURCE);
		writel(RESTART, i2c->base + IC_CON);
		writel(~IC_TAR_SPECIAL, i2c->base + IC_TAR);
	}

	if (abort & ABRT_SBYTE_ACKDET)
		dev_err(&adap->dev,
			"START byte was not acknowledged.\n");
	if (abort & ABRT_TXDATA_NOACK)
		dev_dbg(&adap->dev,
			"No acknowledgement received from slave.\n");
	if (abort & ABRT_10ADDR2_NOACK)
		dev_dbg(&adap->dev,
	"The 2nd address byte of the 10-bit address was not acknowledged.\n");
	if (abort & ABRT_10ADDR1_NOACK)
		dev_dbg(&adap->dev,
	"The 1st address byte of 10-bit address was not acknowledged.\n");
	if (abort & ABRT_7B_ADDR_NOACK)
		dev_dbg(&adap->dev,
			"I2C slave device not acknowledged.\n");

	/* Clear TX_ABRT bit */
	readl(i2c->base + IC_CLR_TX_ABRT);
	i2c->status = STATUS_XFER_ABORT;
}

/**
 * xfer_read - Internal function to implement master read transfer.
 * @adap: i2c_adapter struct pointer
 * @buf: buffer in i2c_msg
 * @length: number of bytes to be read
 *
 * Return Values:
 * 0		if the read transfer succeeds
 * -ETIMEDOUT	if cannot read the "raw" interrupt register
 * -EINVAL	if a transfer abort occurred
 *
 * For every byte, a "READ" command will be loaded into IC_DATA_CMD prior to
 * data transfer. The actual "read" operation will be performed if an RX_FULL
 * interrupt occurred.
 *
 * Note there may be two interrupt signals captured, one should read
 * IC_RAW_INTR_STAT to separate between errors and actual data.
 */
static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
{
	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
	int i = length;
	int err;

	if (length >= 256) {
		dev_err(&adap->dev,
			"I2C FIFO cannot support larger than 256 bytes\n");
		return -EMSGSIZE;
	}

	INIT_COMPLETION(i2c->complete);

	readl(i2c->base + IC_CLR_INTR);
	writel(0x0044, i2c->base + IC_INTR_MASK);

	i2c->status = STATUS_READ_START;

	while (i--)
		writel(IC_RD, i2c->base + IC_DATA_CMD);

	i2c->status = STATUS_READ_START;
	err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
	if (!err) {
		dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
		intel_mid_i2c_hwinit(i2c);
		return -ETIMEDOUT;
	}
	if (i2c->status == STATUS_READ_SUCCESS)
		return 0;
	else
		return -EIO;
}

/**
 * xfer_write - Internal function to implement master write transfer.
 * @adap: i2c_adapter struct pointer
 * @buf: buffer in i2c_msg
 * @length: number of bytes to be read
 *
 * Return Values:
 * 0	if the read transfer succeeds
 * -ETIMEDOUT	if we cannot read the "raw" interrupt register
 * -EINVAL	if a transfer abort occurred
 *
 * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
 * data transfer. The actual "write" operation will be performed when the
 * RX_FULL interrupt signal occurs.
 *
 * Note there may be two interrupt signals captured, one should read
 * IC_RAW_INTR_STAT to separate between errors and actual data.
 */
static int xfer_write(struct i2c_adapter *adap,
		      unsigned char *buf, int length)
{
	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
	int i, err;

	if (length >= 256) {
		dev_err(&adap->dev,
			"I2C FIFO cannot support larger than 256 bytes\n");
		return -EMSGSIZE;
	}

	INIT_COMPLETION(i2c->complete);

	readl(i2c->base + IC_CLR_INTR);
	writel(0x0050, i2c->base + IC_INTR_MASK);

	i2c->status = STATUS_WRITE_START;
	for (i = 0; i < length; i++)
		writel((u16)(*(buf + i)), i2c->base + IC_DATA_CMD);

	i2c->status = STATUS_WRITE_START;
	err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
	if (!err) {
		dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
		intel_mid_i2c_hwinit(i2c);
		return -ETIMEDOUT;
	} else {
		if (i2c->status == STATUS_WRITE_SUCCESS)
			return 0;
		else
			return -EIO;
	}
}

static int intel_mid_i2c_setup(struct i2c_adapter *adap,  struct i2c_msg *pmsg)
{
	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
	int err;
	u32 reg;
	u32 bit_mask;
	u32 mode;

	/* Disable device first */
	err = intel_mid_i2c_disable(adap);
	if (err) {
		dev_err(&adap->dev,
			"Cannot disable i2c controller, timeout\n");
		return err;
	}

	mode = (1 + i2c->speed) << 1;
	/* set the speed mode */
	reg = readl(i2c->base + IC_CON);
	if ((reg & 0x06) != mode) {
		dev_dbg(&adap->dev, "set mode %d\n", i2c->speed);
		writel((reg & ~0x6) | mode, i2c->base + IC_CON);
	}

	reg = readl(i2c->base + IC_CON);
	/* use 7-bit addressing */
	if (pmsg->flags & I2C_M_TEN) {
		if ((reg & ADDR_10BIT) != ADDR_10BIT) {
			dev_dbg(&adap->dev, "set i2c 10 bit address mode\n");
			writel(reg | ADDR_10BIT, i2c->base + IC_CON);
		}
	} else {
		if ((reg & ADDR_10BIT) != 0x0) {
			dev_dbg(&adap->dev, "set i2c 7 bit address mode\n");
			writel(reg & ~ADDR_10BIT, i2c->base + IC_CON);
		}
	}
	/* enable restart conditions */
	reg = readl(i2c->base + IC_CON);
	if ((reg & RESTART) != RESTART) {
		dev_dbg(&adap->dev, "enable restart conditions\n");
		writel(reg | RESTART, i2c->base + IC_CON);
	}

	/* enable master FSM */
	reg = readl(i2c->base + IC_CON);
	dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
	writel(reg | MASTER_EN, i2c->base + IC_CON);
	if ((reg & SLV_DIS) != SLV_DIS) {
		dev_dbg(&adap->dev, "enable master FSM\n");
		writel(reg | SLV_DIS, i2c->base + IC_CON);
		dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
	}

	/* use target address when initiating transfer */
	reg = readl(i2c->base + IC_TAR);
	bit_mask = IC_TAR_SPECIAL | IC_TAR_GC_OR_START;

	if ((reg & bit_mask) != 0x0) {
		dev_dbg(&adap->dev,
	 "WR: use target address when intiating transfer, i2c_tx_target\n");
		writel(reg & ~bit_mask, i2c->base + IC_TAR);
	}

	/* set target address to the I2C slave address */
	dev_dbg(&adap->dev,
		"set target address to the I2C slave address, addr is %x\n",
			pmsg->addr);
	writel(pmsg->addr | (pmsg->flags & I2C_M_TEN ? IC_TAR_10BIT_ADDR : 0),
		i2c->base + IC_TAR);

	/* Enable I2C controller */
	writel(ENABLE, i2c->base + IC_ENABLE);

	return 0;
}

/**
 * intel_mid_i2c_xfer - Main master transfer routine.
 * @adap: i2c_adapter struct pointer
 * @pmsg: i2c_msg struct pointer
 * @num: number of i2c_msg
 *
 * Return Values:
 * +		number of messages transferred
 * -ETIMEDOUT	If cannot disable I2C controller or read IC_STATUS
 * -EINVAL	If the address in i2c_msg is invalid
 *
 * This function will be registered in i2c-core and exposed to external
 * I2C clients.
 * 1. Disable I2C controller
 * 2. Unmask three interrupts: RX_FULL, TX_EMPTY, TX_ABRT
 * 3. Check if address in i2c_msg is valid
 * 4. Enable I2C controller
 * 5. Perform real transfer (call xfer_read or xfer_write)
 * 6. Wait until the current transfer is finished (check bus state)
 * 7. Mask and clear all interrupts
 */
static int intel_mid_i2c_xfer(struct i2c_adapter *adap,
			 struct i2c_msg *pmsg,
			 int num)
{
	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
	int i, err = 0;

	/* if number of messages equal 0*/
	if (num == 0)
		return 0;

	pm_runtime_get(i2c->dev);

	mutex_lock(&i2c->lock);
	dev_dbg(&adap->dev, "intel_mid_i2c_xfer, process %d msg(s)\n", num);
	dev_dbg(&adap->dev, "slave address is %x\n", pmsg->addr);


	if (i2c->status != STATUS_IDLE) {
		dev_err(&adap->dev, "Adapter %d in transfer/standby\n",
								adap->nr);
		mutex_unlock(&i2c->lock);
		pm_runtime_put(i2c->dev);
		return -1;
	}


	for (i = 1; i < num; i++) {
		/* Message address equal? */
		if (unlikely(intel_mid_i2c_address_neq(&pmsg[0], &pmsg[i]))) {
			dev_err(&adap->dev, "Invalid address in msg[%d]\n", i);
			mutex_unlock(&i2c->lock);
			pm_runtime_put(i2c->dev);
			return -EINVAL;
		}
	}

	if (intel_mid_i2c_setup(adap, pmsg)) {
		mutex_unlock(&i2c->lock);
		pm_runtime_put(i2c->dev);
		return -EINVAL;
	}

	for (i = 0; i < num; i++) {
		i2c->msg = pmsg;
		i2c->status = STATUS_IDLE;
		/* Read or Write */
		if (pmsg->flags & I2C_M_RD) {
			dev_dbg(&adap->dev, "I2C_M_RD\n");
			err = xfer_read(adap, pmsg->buf, pmsg->len);
		} else {
			dev_dbg(&adap->dev, "I2C_M_WR\n");
			err = xfer_write(adap, pmsg->buf, pmsg->len);
		}
		if (err < 0)
			break;
		dev_dbg(&adap->dev, "msg[%d] transfer complete\n", i);
		pmsg++;		/* next message */
	}

	/* Mask interrupts */
	writel(0x0000, i2c->base + IC_INTR_MASK);
	/* Clear all interrupts */
	readl(i2c->base + IC_CLR_INTR);

	i2c->status = STATUS_IDLE;
	mutex_unlock(&i2c->lock);
	pm_runtime_put(i2c->dev);

	return err;
}

static int intel_mid_i2c_runtime_suspend(struct device *dev)
{
	struct pci_dev *pdev = to_pci_dev(dev);
	struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
	struct i2c_adapter *adap = to_i2c_adapter(dev);
	int err;

	if (i2c->status != STATUS_IDLE)
		return -1;

	intel_mid_i2c_disable(adap);

	err = pci_save_state(pdev);
	if (err) {
		dev_err(dev, "pci_save_state failed\n");
		return err;
	}

	err = pci_set_power_state(pdev, PCI_D3hot);
	if (err) {
		dev_err(dev, "pci_set_power_state failed\n");
		return err;
	}
	i2c->status = STATUS_STANDBY;

	return 0;
}

static int intel_mid_i2c_runtime_resume(struct device *dev)
{
	struct pci_dev *pdev = to_pci_dev(dev);
	struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
	int err;

	if (i2c->status != STATUS_STANDBY)
		return 0;

	pci_set_power_state(pdev, PCI_D0);
	pci_restore_state(pdev);
	err = pci_enable_device(pdev);
	if (err) {
		dev_err(dev, "pci_enable_device failed\n");
		return err;
	}

	i2c->status = STATUS_IDLE;

	intel_mid_i2c_hwinit(i2c);
	return err;
}

static void i2c_isr_read(struct intel_mid_i2c_private *i2c)
{
	struct i2c_msg *msg = i2c->msg;
	int rx_num;
	u32 len;
	u8 *buf;

	if (!(msg->flags & I2C_M_RD))
		return;

	if (i2c->status != STATUS_READ_IN_PROGRESS) {
		len = msg->len;
		buf = msg->buf;
	} else {
		len = i2c->rx_buf_len;
		buf = i2c->rx_buf;
	}

	rx_num = readl(i2c->base + IC_RXFLR);

	for (; len > 0 && rx_num > 0; len--, rx_num--)
		*buf++ = readl(i2c->base + IC_DATA_CMD);

	if (len > 0) {
		i2c->status = STATUS_READ_IN_PROGRESS;
		i2c->rx_buf_len = len;
		i2c->rx_buf = buf;
	} else
		i2c->status = STATUS_READ_SUCCESS;

	return;
}

static irqreturn_t intel_mid_i2c_isr(int this_irq, void *dev)
{
	struct intel_mid_i2c_private *i2c = dev;
	u32 stat = readl(i2c->base + IC_INTR_STAT);

	if (!stat)
		return IRQ_NONE;

	dev_dbg(&i2c->adap.dev, "%s, stat = 0x%x\n", __func__, stat);
	stat &= 0x54;

	if (i2c->status != STATUS_WRITE_START &&
	    i2c->status != STATUS_READ_START &&
	    i2c->status != STATUS_READ_IN_PROGRESS)
		goto err;

	if (stat & TX_ABRT)
		i2c->abort = readl(i2c->base + IC_TX_ABRT_SOURCE);

	readl(i2c->base + IC_CLR_INTR);

	if (stat & TX_ABRT) {
		intel_mid_i2c_abort(i2c);
		goto exit;
	}

	if (stat & RX_FULL) {
		i2c_isr_read(i2c);
		goto exit;
	}

	if (stat & TX_EMPTY) {
		if (readl(i2c->base + IC_STATUS) & 0x4)
			i2c->status = STATUS_WRITE_SUCCESS;
	}

exit:
	if (i2c->status == STATUS_READ_SUCCESS ||
	    i2c->status == STATUS_WRITE_SUCCESS ||
	    i2c->status == STATUS_XFER_ABORT) {
		/* Clear all interrupts */
		readl(i2c->base + IC_CLR_INTR);
		/* Mask interrupts */
		writel(0, i2c->base + IC_INTR_MASK);
		complete(&i2c->complete);
	}
err:
	return IRQ_HANDLED;
}

static struct i2c_algorithm intel_mid_i2c_algorithm = {
	.master_xfer	= intel_mid_i2c_xfer,
	.functionality	= intel_mid_i2c_func,
};


static const struct dev_pm_ops intel_mid_i2c_pm_ops = {
	.runtime_suspend = intel_mid_i2c_runtime_suspend,
	.runtime_resume = intel_mid_i2c_runtime_resume,
};

/**
 * intel_mid_i2c_probe - I2C controller initialization routine
 * @dev: pci device
 * @id: device id
 *
 * Return Values:
 * 0		success
 * -ENODEV	If cannot allocate pci resource
 * -ENOMEM	If the register base remapping failed, or
 *		if kzalloc failed
 *
 * Initialization steps:
 * 1. Request for PCI resource
 * 2. Remap the start address of PCI resource to register base
 * 3. Request for device memory region
 * 4. Fill in the struct members of intel_mid_i2c_private
 * 5. Call intel_mid_i2c_hwinit() for hardware initialization
 * 6. Register I2C adapter in i2c-core
 */
static int __devinit intel_mid_i2c_probe(struct pci_dev *dev,
				    const struct pci_device_id *id)
{
	struct intel_mid_i2c_private *mrst;
	unsigned long start, len;
	int err, busnum;
	void __iomem *base = NULL;

	dev_dbg(&dev->dev, "Get into probe function for I2C\n");
	err = pci_enable_device(dev);
	if (err) {
		dev_err(&dev->dev, "Failed to enable I2C PCI device (%d)\n",
			err);
		goto exit;
	}

	/* Determine the address of the I2C area */
	start = pci_resource_start(dev, 0);
	len = pci_resource_len(dev, 0);
	if (!start || len == 0) {
		dev_err(&dev->dev, "base address not set\n");
		err = -ENODEV;
		goto exit;
	}
	dev_dbg(&dev->dev, "%s i2c resource start 0x%lx, len=%ld\n",
		PLATFORM, start, len);

	err = pci_request_region(dev, 0, DRIVER_NAME);
	if (err) {
		dev_err(&dev->dev, "failed to request I2C region "
			"0x%lx-0x%lx\n", start,
			(unsigned long)pci_resource_end(dev, 0));
		goto exit;
	}

	base = ioremap_nocache(start, len);
	if (!base) {
		dev_err(&dev->dev, "I/O memory remapping failed\n");
		err = -ENOMEM;
		goto fail0;
	}

	/* Allocate the per-device data structure, intel_mid_i2c_private */
	mrst = kzalloc(sizeof(struct intel_mid_i2c_private), GFP_KERNEL);
	if (mrst == NULL) {
		dev_err(&dev->dev, "can't allocate interface\n");
		err = -ENOMEM;
		goto fail1;
	}

	/* Initialize struct members */
	snprintf(mrst->adap.name, sizeof(mrst->adap.name),
		"Intel MID I2C at %lx", start);
	mrst->adap.owner = THIS_MODULE;
	mrst->adap.algo = &intel_mid_i2c_algorithm;
	mrst->adap.dev.parent = &dev->dev;
	mrst->dev = &dev->dev;
	mrst->base = base;
	mrst->speed = STANDARD;
	mrst->abort = 0;
	mrst->rx_buf_len = 0;
	mrst->status = STATUS_IDLE;

	pci_set_drvdata(dev, mrst);
	i2c_set_adapdata(&mrst->adap, mrst);

	mrst->adap.nr = busnum = id->driver_data;
	if (dev->device <= 0x0804)
		mrst->platform = MOORESTOWN;
	else
		mrst->platform = MEDFIELD;

	dev_dbg(&dev->dev, "I2C%d\n", busnum);

	if (ctl_num > busnum) {
		if (speed_mode[busnum] < 0 || speed_mode[busnum] >= NUM_SPEEDS)
			dev_warn(&dev->dev, "invalid speed %d ignored.\n",
							speed_mode[busnum]);
		else
			mrst->speed = speed_mode[busnum];
	}

	/* Initialize i2c controller */
	err = intel_mid_i2c_hwinit(mrst);
	if (err < 0) {
		dev_err(&dev->dev, "I2C interface initialization failed\n");
		goto fail2;
	}

	mutex_init(&mrst->lock);
	init_completion(&mrst->complete);

	/* Clear all interrupts */
	readl(mrst->base + IC_CLR_INTR);
	writel(0x0000, mrst->base + IC_INTR_MASK);

	err = request_irq(dev->irq, intel_mid_i2c_isr, IRQF_SHARED,
					mrst->adap.name, mrst);
	if (err) {
		dev_err(&dev->dev, "Failed to request IRQ for I2C controller: "
			"%s", mrst->adap.name);
		goto fail2;
	}

	/* Adapter registration */
	err = i2c_add_numbered_adapter(&mrst->adap);
	if (err) {
		dev_err(&dev->dev, "Adapter %s registration failed\n",
			mrst->adap.name);
		goto fail3;
	}

	dev_dbg(&dev->dev, "%s I2C bus %d driver bind success.\n",
		(mrst->platform == MOORESTOWN) ? "Moorestown" : "Medfield",
		busnum);

	pm_runtime_enable(&dev->dev);
	return 0;

fail3:
	free_irq(dev->irq, mrst);
fail2:
	pci_set_drvdata(dev, NULL);
	kfree(mrst);
fail1:
	iounmap(base);
fail0:
	pci_release_region(dev, 0);
exit:
	return err;
}

static void __devexit intel_mid_i2c_remove(struct pci_dev *dev)
{
	struct intel_mid_i2c_private *mrst = pci_get_drvdata(dev);
	intel_mid_i2c_disable(&mrst->adap);
	if (i2c_del_adapter(&mrst->adap))
		dev_err(&dev->dev, "Failed to delete i2c adapter");

	free_irq(dev->irq, mrst);
	pci_set_drvdata(dev, NULL);
	iounmap(mrst->base);
	kfree(mrst);
	pci_release_region(dev, 0);
}

static DEFINE_PCI_DEVICE_TABLE(intel_mid_i2c_ids) = {
	/* Moorestown */
	{ PCI_VDEVICE(INTEL, 0x0802), 0 },
	{ PCI_VDEVICE(INTEL, 0x0803), 1 },
	{ PCI_VDEVICE(INTEL, 0x0804), 2 },
	/* Medfield */
	{ PCI_VDEVICE(INTEL, 0x0817), 3,},
	{ PCI_VDEVICE(INTEL, 0x0818), 4 },
	{ PCI_VDEVICE(INTEL, 0x0819), 5 },
	{ PCI_VDEVICE(INTEL, 0x082C), 0 },
	{ PCI_VDEVICE(INTEL, 0x082D), 1 },
	{ PCI_VDEVICE(INTEL, 0x082E), 2 },
	{ 0,}
};
MODULE_DEVICE_TABLE(pci, intel_mid_i2c_ids);

static struct pci_driver intel_mid_i2c_driver = {
	.name		= DRIVER_NAME,
	.id_table	= intel_mid_i2c_ids,
	.probe		= intel_mid_i2c_probe,
	.remove		= __devexit_p(intel_mid_i2c_remove),
};

static int __init intel_mid_i2c_init(void)
{
	return pci_register_driver(&intel_mid_i2c_driver);
}

static void __exit intel_mid_i2c_exit(void)
{
	pci_unregister_driver(&intel_mid_i2c_driver);
}

module_init(intel_mid_i2c_init);
module_exit(intel_mid_i2c_exit);

MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>");
MODULE_DESCRIPTION("I2C driver for Moorestown Platform");
MODULE_LICENSE("GPL");
MODULE_VERSION(VERSION);