/*
 * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * EXYNOS4210 - CPU frequency scaling support
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/cpufreq.h>

#include <mach/regs-clock.h>
#include <mach/cpufreq.h>

#define CPUFREQ_LEVEL_END	L5

static int max_support_idx = L0;
static int min_support_idx = (CPUFREQ_LEVEL_END - 1);

static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;

struct cpufreq_clkdiv {
	unsigned int index;
	unsigned int clkdiv;
};

static unsigned int exynos4210_volt_table[CPUFREQ_LEVEL_END] = {
	1250000, 1150000, 1050000, 975000, 950000,
};


static struct cpufreq_clkdiv exynos4210_clkdiv_table[CPUFREQ_LEVEL_END];

static struct cpufreq_frequency_table exynos4210_freq_table[] = {
	{L0, 1200*1000},
	{L1, 1000*1000},
	{L2, 800*1000},
	{L3, 500*1000},
	{L4, 200*1000},
	{0, CPUFREQ_TABLE_END},
};

static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = {
	/*
	 * Clock divider value for following
	 * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
	 *		DIVATB, DIVPCLK_DBG, DIVAPLL }
	 */

	/* ARM L0: 1200MHz */
	{ 0, 3, 7, 3, 4, 1, 7 },

	/* ARM L1: 1000MHz */
	{ 0, 3, 7, 3, 4, 1, 7 },

	/* ARM L2: 800MHz */
	{ 0, 3, 7, 3, 3, 1, 7 },

	/* ARM L3: 500MHz */
	{ 0, 3, 7, 3, 3, 1, 7 },

	/* ARM L4: 200MHz */
	{ 0, 1, 3, 1, 3, 1, 0 },
};

static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
	/*
	 * Clock divider value for following
	 * { DIVCOPY, DIVHPM }
	 */

	/* ARM L0: 1200MHz */
	{ 5, 0 },

	/* ARM L1: 1000MHz */
	{ 4, 0 },

	/* ARM L2: 800MHz */
	{ 3, 0 },

	/* ARM L3: 500MHz */
	{ 3, 0 },

	/* ARM L4: 200MHz */
	{ 3, 0 },
};

static unsigned int exynos4210_apll_pms_table[CPUFREQ_LEVEL_END] = {
	/* APLL FOUT L0: 1200MHz */
	((150 << 16) | (3 << 8) | 1),

	/* APLL FOUT L1: 1000MHz */
	((250 << 16) | (6 << 8) | 1),

	/* APLL FOUT L2: 800MHz */
	((200 << 16) | (6 << 8) | 1),

	/* APLL FOUT L3: 500MHz */
	((250 << 16) | (6 << 8) | 2),

	/* APLL FOUT L4: 200MHz */
	((200 << 16) | (6 << 8) | 3),
};

static void exynos4210_set_clkdiv(unsigned int div_index)
{
	unsigned int tmp;

	/* Change Divider - CPU0 */

	tmp = exynos4210_clkdiv_table[div_index].clkdiv;

	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);

	do {
		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
	} while (tmp & 0x1111111);

	/* Change Divider - CPU1 */

	tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);

	tmp &= ~((0x7 << 4) | 0x7);

	tmp |= ((clkdiv_cpu1[div_index][0] << 4) |
		(clkdiv_cpu1[div_index][1] << 0));

	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);

	do {
		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
	} while (tmp & 0x11);
}

static void exynos4210_set_apll(unsigned int index)
{
	unsigned int tmp;

	/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
	clk_set_parent(moutcore, mout_mpll);

	do {
		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
		tmp &= 0x7;
	} while (tmp != 0x2);

	/* 2. Set APLL Lock time */
	__raw_writel(EXYNOS4_APLL_LOCKTIME, EXYNOS4_APLL_LOCK);

	/* 3. Change PLL PMS values */
	tmp = __raw_readl(EXYNOS4_APLL_CON0);
	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
	tmp |= exynos4210_apll_pms_table[index];
	__raw_writel(tmp, EXYNOS4_APLL_CON0);

	/* 4. wait_lock_time */
	do {
		tmp = __raw_readl(EXYNOS4_APLL_CON0);
	} while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT)));

	/* 5. MUX_CORE_SEL = APLL */
	clk_set_parent(moutcore, mout_apll);

	do {
		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
}

bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
{
	unsigned int old_pm = (exynos4210_apll_pms_table[old_index] >> 8);
	unsigned int new_pm = (exynos4210_apll_pms_table[new_index] >> 8);

	return (old_pm == new_pm) ? 0 : 1;
}

static void exynos4210_set_frequency(unsigned int old_index,
				     unsigned int new_index)
{
	unsigned int tmp;

	if (old_index > new_index) {
		if (!exynos4210_pms_change(old_index, new_index)) {
			/* 1. Change the system clock divider values */
			exynos4210_set_clkdiv(new_index);

			/* 2. Change just s value in apll m,p,s value */
			tmp = __raw_readl(EXYNOS4_APLL_CON0);
			tmp &= ~(0x7 << 0);
			tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
			__raw_writel(tmp, EXYNOS4_APLL_CON0);
		} else {
			/* Clock Configuration Procedure */
			/* 1. Change the system clock divider values */
			exynos4210_set_clkdiv(new_index);
			/* 2. Change the apll m,p,s value */
			exynos4210_set_apll(new_index);
		}
	} else if (old_index < new_index) {
		if (!exynos4210_pms_change(old_index, new_index)) {
			/* 1. Change just s value in apll m,p,s value */
			tmp = __raw_readl(EXYNOS4_APLL_CON0);
			tmp &= ~(0x7 << 0);
			tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
			__raw_writel(tmp, EXYNOS4_APLL_CON0);

			/* 2. Change the system clock divider values */
			exynos4210_set_clkdiv(new_index);
		} else {
			/* Clock Configuration Procedure */
			/* 1. Change the apll m,p,s value */
			exynos4210_set_apll(new_index);
			/* 2. Change the system clock divider values */
			exynos4210_set_clkdiv(new_index);
		}
	}
}

int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
{
	int i;
	unsigned int tmp;
	unsigned long rate;

	cpu_clk = clk_get(NULL, "armclk");
	if (IS_ERR(cpu_clk))
		return PTR_ERR(cpu_clk);

	moutcore = clk_get(NULL, "moutcore");
	if (IS_ERR(moutcore))
		goto err_moutcore;

	mout_mpll = clk_get(NULL, "mout_mpll");
	if (IS_ERR(mout_mpll))
		goto err_mout_mpll;

	rate = clk_get_rate(mout_mpll) / 1000;

	mout_apll = clk_get(NULL, "mout_apll");
	if (IS_ERR(mout_apll))
		goto err_mout_apll;

	tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);

	for (i = L0; i <  CPUFREQ_LEVEL_END; i++) {
		tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
			EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
			EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
			EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
			EXYNOS4_CLKDIV_CPU0_ATB_MASK |
			EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
			EXYNOS4_CLKDIV_CPU0_APLL_MASK);

		tmp |= ((clkdiv_cpu0[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
			(clkdiv_cpu0[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
			(clkdiv_cpu0[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
			(clkdiv_cpu0[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
			(clkdiv_cpu0[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
			(clkdiv_cpu0[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
			(clkdiv_cpu0[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));

		exynos4210_clkdiv_table[i].clkdiv = tmp;
	}

	info->mpll_freq_khz = rate;
	info->pm_lock_idx = L2;
	info->pll_safe_idx = L2;
	info->max_support_idx = max_support_idx;
	info->min_support_idx = min_support_idx;
	info->cpu_clk = cpu_clk;
	info->volt_table = exynos4210_volt_table;
	info->freq_table = exynos4210_freq_table;
	info->set_freq = exynos4210_set_frequency;
	info->need_apll_change = exynos4210_pms_change;

	return 0;

err_mout_apll:
	if (!IS_ERR(mout_mpll))
		clk_put(mout_mpll);
err_mout_mpll:
	if (!IS_ERR(moutcore))
		clk_put(moutcore);
err_moutcore:
	if (!IS_ERR(cpu_clk))
		clk_put(cpu_clk);

	pr_debug("%s: failed initialization\n", __func__);
	return -EINVAL;
}
EXPORT_SYMBOL(exynos4210_cpufreq_init);