/**
 * dwc3-pci.c - PCI Specific glue layer
 *
 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
 *
 * Authors: Felipe Balbi <balbi@ti.com>,
 *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The names of the above-listed copyright holders may not be used
 *    to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2, as published by the Free
 * Software Foundation.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>

/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
#define PCI_DEVICE_ID_INTEL_BYT		0x0f37
#define PCI_DEVICE_ID_INTEL_MRFLD	0x119e

#define DWC3_PCI_DEVS_POSSIBLE	32

struct dwc3_pci {
	struct device		*dev;
	struct platform_device	*dwc3;
};

static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);

static int dwc3_pci_get_device_id(struct dwc3_pci *glue)
{
	int		id;

again:
	id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
	if (id < DWC3_PCI_DEVS_POSSIBLE) {
		int old;

		old = test_and_set_bit(id, dwc3_pci_devs);
		if (old)
			goto again;
	} else {
		dev_err(glue->dev, "no space for new device\n");
		id = -ENOMEM;
	}

	return 0;
}

static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id)
{
	int			ret;

	if (id < 0)
		return;

	ret = test_bit(id, dwc3_pci_devs);
	WARN(!ret, "Device: %s\nID %d not in use\n",
			dev_driver_string(glue->dev), id);
	clear_bit(id, dwc3_pci_devs);
}

static int __devinit dwc3_pci_probe(struct pci_dev *pci,
		const struct pci_device_id *id)
{
	struct resource		res[2];
	struct platform_device	*dwc3;
	struct dwc3_pci		*glue;
	int			ret = -ENOMEM;
	int			devid;

	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
	if (!glue) {
		dev_err(&pci->dev, "not enough memory\n");
		goto err0;
	}

	glue->dev	= &pci->dev;

	ret = pci_enable_device(pci);
	if (ret) {
		dev_err(&pci->dev, "failed to enable pci device\n");
		goto err1;
	}

	pci_set_power_state(pci, PCI_D0);
	pci_set_master(pci);

	devid = dwc3_pci_get_device_id(glue);
	if (devid < 0)
		goto err2;

	dwc3 = platform_device_alloc("dwc3-pci", devid);
	if (!dwc3) {
		dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
		goto err3;
	}

	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));

	res[0].start	= pci_resource_start(pci, 0);
	res[0].end	= pci_resource_end(pci, 0);
	res[0].name	= "dwc_usb3";
	res[0].flags	= IORESOURCE_MEM;

	res[1].start	= pci->irq;
	res[1].name	= "dwc_usb3";
	res[1].flags	= IORESOURCE_IRQ;

	ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
	if (ret) {
		dev_err(&pci->dev, "couldn't add resources to dwc3 device\n");
		goto err4;
	}

	pci_set_drvdata(pci, glue);

	dma_set_coherent_mask(&dwc3->dev, pci->dev.coherent_dma_mask);

	dwc3->dev.dma_mask = pci->dev.dma_mask;
	dwc3->dev.dma_parms = pci->dev.dma_parms;
	dwc3->dev.parent = &pci->dev;
	glue->dwc3	= dwc3;

	ret = platform_device_add(dwc3);
	if (ret) {
		dev_err(&pci->dev, "failed to register dwc3 device\n");
		goto err4;
	}

	return 0;

err4:
	pci_set_drvdata(pci, NULL);
	platform_device_put(dwc3);

err3:
	dwc3_pci_put_device_id(glue, devid);

err2:
	pci_disable_device(pci);

err1:
	kfree(pci);

err0:
	return ret;
}

static void __devexit dwc3_pci_remove(struct pci_dev *pci)
{
	struct dwc3_pci	*glue = pci_get_drvdata(pci);

	dwc3_pci_put_device_id(glue, glue->dwc3->id);
	platform_device_unregister(glue->dwc3);
	pci_set_drvdata(pci, NULL);
	pci_disable_device(pci);
	kfree(glue);
}

static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
	{
		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
	},
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
	{  }	/* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);

static struct pci_driver dwc3_pci_driver = {
	.name		= "pci-dwc3",
	.id_table	= dwc3_pci_id_table,
	.probe		= dwc3_pci_probe,
	.remove		= __devexit_p(dwc3_pci_remove),
};

MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");

static int __devinit dwc3_pci_init(void)
{
	return pci_register_driver(&dwc3_pci_driver);
}
module_init(dwc3_pci_init);

static void __exit dwc3_pci_exit(void)
{
	pci_unregister_driver(&dwc3_pci_driver);
}
module_exit(dwc3_pci_exit);