Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 | /*
* Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/phy.h>
#include <linux/serial_8250.h>
#include <linux/stmmac.h>
#include <linux/usb/ehci_pdriver.h>
#include <asm-generic/sizes.h>
#include <loongson1.h>
#define LS1X_UART(_id) \
{ \
.mapbase = LS1X_UART ## _id ## _BASE, \
.irq = LS1X_UART ## _id ## _IRQ, \
.iotype = UPIO_MEM, \
.flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
.type = PORT_16550A, \
}
static struct plat_serial8250_port ls1x_serial8250_port[] = {
LS1X_UART(0),
LS1X_UART(1),
LS1X_UART(2),
LS1X_UART(3),
{},
};
struct platform_device ls1x_uart_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = ls1x_serial8250_port,
},
};
void __init ls1x_serial_setup(struct platform_device *pdev)
{
struct clk *clk;
struct plat_serial8250_port *p;
clk = clk_get(NULL, pdev->name);
if (IS_ERR(clk))
panic("unable to get %s clock, err=%ld",
pdev->name, PTR_ERR(clk));
for (p = pdev->dev.platform_data; p->flags != 0; ++p)
p->uartclk = clk_get_rate(clk);
}
/* Synopsys Ethernet GMAC */
static struct resource ls1x_eth0_resources[] = {
[0] = {
.start = LS1X_GMAC0_BASE,
.end = LS1X_GMAC0_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "macirq",
.start = LS1X_GMAC0_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
.phy_mask = 0,
};
static struct plat_stmmacenet_data ls1x_eth_data = {
.bus_id = 0,
.phy_addr = -1,
.mdio_bus_data = &ls1x_mdio_bus_data,
.has_gmac = 1,
.tx_coe = 1,
};
struct platform_device ls1x_eth0_device = {
.name = "stmmaceth",
.id = 0,
.num_resources = ARRAY_SIZE(ls1x_eth0_resources),
.resource = ls1x_eth0_resources,
.dev = {
.platform_data = &ls1x_eth_data,
},
};
/* USB EHCI */
static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
static struct resource ls1x_ehci_resources[] = {
[0] = {
.start = LS1X_EHCI_BASE,
.end = LS1X_EHCI_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = LS1X_EHCI_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct usb_ehci_pdata ls1x_ehci_pdata = {
};
struct platform_device ls1x_ehci_device = {
.name = "ehci-platform",
.id = -1,
.num_resources = ARRAY_SIZE(ls1x_ehci_resources),
.resource = ls1x_ehci_resources,
.dev = {
.dma_mask = &ls1x_ehci_dmamask,
.platform_data = &ls1x_ehci_pdata,
},
};
/* Real Time Clock */
struct platform_device ls1x_rtc_device = {
.name = "ls1x-rtc",
.id = -1,
};
|