Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 | /*
* Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
* reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the NetLogic
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __XLP_HAL_UART_H__
#define __XLP_HAL_UART_H__
/* UART Specific registers */
#define UART_RX_DATA 0x00
#define UART_TX_DATA 0x00
#define UART_INT_EN 0x01
#define UART_INT_ID 0x02
#define UART_FIFO_CTL 0x02
#define UART_LINE_CTL 0x03
#define UART_MODEM_CTL 0x04
#define UART_LINE_STS 0x05
#define UART_MODEM_STS 0x06
#define UART_DIVISOR0 0x00
#define UART_DIVISOR1 0x01
#define BASE_BAUD (XLP_IO_CLK/16)
#define BAUD_DIVISOR(baud) (BASE_BAUD / baud)
/* LCR mask values */
#define LCR_5BITS 0x00
#define LCR_6BITS 0x01
#define LCR_7BITS 0x02
#define LCR_8BITS 0x03
#define LCR_STOPB 0x04
#define LCR_PENAB 0x08
#define LCR_PODD 0x00
#define LCR_PEVEN 0x10
#define LCR_PONE 0x20
#define LCR_PZERO 0x30
#define LCR_SBREAK 0x40
#define LCR_EFR_ENABLE 0xbf
#define LCR_DLAB 0x80
/* MCR mask values */
#define MCR_DTR 0x01
#define MCR_RTS 0x02
#define MCR_DRS 0x04
#define MCR_IE 0x08
#define MCR_LOOPBACK 0x10
/* FCR mask values */
#define FCR_RCV_RST 0x02
#define FCR_XMT_RST 0x04
#define FCR_RX_LOW 0x00
#define FCR_RX_MEDL 0x40
#define FCR_RX_MEDH 0x80
#define FCR_RX_HIGH 0xc0
/* IER mask values */
#define IER_ERXRDY 0x1
#define IER_ETXRDY 0x2
#define IER_ERLS 0x4
#define IER_EMSC 0x8
#if !defined(LOCORE) && !defined(__ASSEMBLY__)
#define nlm_read_uart_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v)
#define nlm_get_uart_pcibase(node, inst) \
nlm_pcicfg_base(cpu_is_xlp9xx() ? XLP9XX_IO_UART_OFFSET(node) : \
XLP_IO_UART_OFFSET(node, inst))
#define nlm_get_uart_regbase(node, inst) \
(nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
static inline void
nlm_uart_set_baudrate(uint64_t base, int baud)
{
uint32_t lcr;
lcr = nlm_read_uart_reg(base, UART_LINE_CTL);
/* enable divisor register, and write baud values */
nlm_write_uart_reg(base, UART_LINE_CTL, lcr | (1 << 7));
nlm_write_uart_reg(base, UART_DIVISOR0,
(BAUD_DIVISOR(baud) & 0xff));
nlm_write_uart_reg(base, UART_DIVISOR1,
((BAUD_DIVISOR(baud) >> 8) & 0xff));
/* restore default lcr */
nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
}
static inline void
nlm_uart_outbyte(uint64_t base, char c)
{
uint32_t lsr;
for (;;) {
lsr = nlm_read_uart_reg(base, UART_LINE_STS);
if (lsr & 0x20)
break;
}
nlm_write_uart_reg(base, UART_TX_DATA, (int)c);
}
static inline char
nlm_uart_inbyte(uint64_t base)
{
int data, lsr;
for (;;) {
lsr = nlm_read_uart_reg(base, UART_LINE_STS);
if (lsr & 0x80) { /* parity/frame/break-error - push a zero */
data = 0;
break;
}
if (lsr & 0x01) { /* Rx data */
data = nlm_read_uart_reg(base, UART_RX_DATA);
break;
}
}
return (char)data;
}
static inline int
nlm_uart_init(uint64_t base, int baud, int databits, int stopbits,
int parity, int int_en, int loopback)
{
uint32_t lcr;
lcr = 0;
if (databits >= 8)
lcr |= LCR_8BITS;
else if (databits == 7)
lcr |= LCR_7BITS;
else if (databits == 6)
lcr |= LCR_6BITS;
else
lcr |= LCR_5BITS;
if (stopbits > 1)
lcr |= LCR_STOPB;
lcr |= parity << 3;
/* setup default lcr */
nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
/* Reset the FIFOs */
nlm_write_uart_reg(base, UART_LINE_CTL, FCR_RCV_RST | FCR_XMT_RST);
nlm_uart_set_baudrate(base, baud);
if (loopback)
nlm_write_uart_reg(base, UART_MODEM_CTL, 0x1f);
if (int_en)
nlm_write_uart_reg(base, UART_INT_EN, IER_ERXRDY | IER_ETXRDY);
return 0;
}
#endif /* !LOCORE && !__ASSEMBLY__ */
#endif /* __XLP_HAL_UART_H__ */
|