Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 | /*
comedi/drivers/8255.c
Driver for 8255
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 1998 David A. Schleef <ds@schleef.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
Driver: 8255
Description: generic 8255 support
Devices: [standard] 8255 (8255)
Author: ds
Status: works
Updated: Fri, 7 Jun 2002 12:56:45 -0700
The classic in digital I/O. The 8255 appears in Comedi as a single
digital I/O subdevice with 24 channels. The channel 0 corresponds
to the 8255's port A, bit 0; channel 23 corresponds to port C, bit
7. Direction configuration is done in blocks, with channels 0-7,
8-15, 16-19, and 20-23 making up the 4 blocks. The only 8255 mode
supported is mode 0.
You should enable compilation this driver if you plan to use a board
that has an 8255 chip. For multifunction boards, the main driver will
configure the 8255 subdevice automatically.
This driver also works independently with ISA and PCI cards that
directly map the 8255 registers to I/O ports, including cards with
multiple 8255 chips. To configure the driver for such a card, the
option list should be a list of the I/O port bases for each of the
8255 chips. For example,
comedi_config /dev/comedi0 8255 0x200,0x204,0x208,0x20c
Note that most PCI 8255 boards do NOT work with this driver, and
need a separate driver as a wrapper. For those that do work, the
I/O port base address can be found in the output of 'lspci -v'.
*/
/*
This file contains an exported subdevice for driving an 8255.
To use this subdevice as part of another driver, you need to
set up the subdevice in the attach function of the driver by
calling:
subdev_8255_init(device, subdevice, io_function, iobase)
device and subdevice are pointers to the device and subdevice
structures. io_function will be called to provide the
low-level input/output to the device, i.e., actual register
access. io_function will be called with the value of iobase
as the last parameter. If the 8255 device is mapped as 4
consecutive I/O ports, you can use NULL for io_function
and the I/O port base for iobase, and an internal function will
handle the register access.
In addition, if the main driver handles interrupts, you can
enable commands on the subdevice by calling subdev_8255_init_irq()
instead. Then, when you get an interrupt that is likely to be
from the 8255, you should call subdev_8255_interrupt(), which
will copy the latched value to a Comedi buffer.
*/
#include "../comedidev.h"
#include <linux/ioport.h>
#include <linux/slab.h>
#include "comedi_fc.h"
#include "8255.h"
#define _8255_SIZE 4
#define _8255_DATA 0
#define _8255_CR 3
#define CR_C_LO_IO 0x01
#define CR_B_IO 0x02
#define CR_B_MODE 0x04
#define CR_C_HI_IO 0x08
#define CR_A_IO 0x10
#define CR_A_MODE(a) ((a)<<5)
#define CR_CW 0x80
struct subdev_8255_private {
unsigned long iobase;
int (*io) (int, int, int, unsigned long);
};
static int subdev_8255_io(int dir, int port, int data, unsigned long iobase)
{
if (dir) {
outb(data, iobase + port);
return 0;
} else {
return inb(iobase + port);
}
}
void subdev_8255_interrupt(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
unsigned long iobase = spriv->iobase;
short d;
d = spriv->io(0, _8255_DATA, 0, iobase);
d |= (spriv->io(0, _8255_DATA + 1, 0, iobase) << 8);
comedi_buf_put(s->async, d);
s->async->events |= COMEDI_CB_EOS;
comedi_event(dev, s);
}
EXPORT_SYMBOL_GPL(subdev_8255_interrupt);
static int subdev_8255_insn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct subdev_8255_private *spriv = s->private;
unsigned long iobase = spriv->iobase;
unsigned int mask;
unsigned int bits;
unsigned int v;
mask = data[0];
bits = data[1];
if (mask) {
v = s->state;
v &= ~mask;
v |= (bits & mask);
if (mask & 0xff)
spriv->io(1, _8255_DATA, v & 0xff, iobase);
if (mask & 0xff00)
spriv->io(1, _8255_DATA + 1, (v >> 8) & 0xff, iobase);
if (mask & 0xff0000)
spriv->io(1, _8255_DATA + 2, (v >> 16) & 0xff, iobase);
s->state = v;
}
v = spriv->io(0, _8255_DATA, 0, iobase);
v |= (spriv->io(0, _8255_DATA + 1, 0, iobase) << 8);
v |= (spriv->io(0, _8255_DATA + 2, 0, iobase) << 16);
data[1] = v;
return insn->n;
}
static void subdev_8255_do_config(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
unsigned long iobase = spriv->iobase;
int config;
config = CR_CW;
/* 1 in io_bits indicates output, 1 in config indicates input */
if (!(s->io_bits & 0x0000ff))
config |= CR_A_IO;
if (!(s->io_bits & 0x00ff00))
config |= CR_B_IO;
if (!(s->io_bits & 0x0f0000))
config |= CR_C_LO_IO;
if (!(s->io_bits & 0xf00000))
config |= CR_C_HI_IO;
spriv->io(1, _8255_CR, config, iobase);
}
static int subdev_8255_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
unsigned int mask;
unsigned int bits;
mask = 1 << CR_CHAN(insn->chanspec);
if (mask & 0x0000ff)
bits = 0x0000ff;
else if (mask & 0x00ff00)
bits = 0x00ff00;
else if (mask & 0x0f0000)
bits = 0x0f0000;
else
bits = 0xf00000;
switch (data[0]) {
case INSN_CONFIG_DIO_INPUT:
s->io_bits &= ~bits;
break;
case INSN_CONFIG_DIO_OUTPUT:
s->io_bits |= bits;
break;
case INSN_CONFIG_DIO_QUERY:
data[1] = (s->io_bits & bits) ? COMEDI_OUTPUT : COMEDI_INPUT;
return insn->n;
break;
default:
return -EINVAL;
}
subdev_8255_do_config(dev, s);
return 1;
}
static int subdev_8255_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
int err = 0;
/* Step 1 : check if triggers are trivially valid */
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT);
err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW);
err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
if (err)
return 1;
/* Step 2a : make sure trigger sources are unique */
/* Step 2b : and mutually compatible */
if (err)
return 2;
/* Step 3: check if arguments are trivially valid */
err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, 1);
err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
/* step 4 */
if (err)
return 4;
return 0;
}
static int subdev_8255_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
/* FIXME */
return 0;
}
static int subdev_8255_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
/* FIXME */
return 0;
}
int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
int (*io) (int, int, int, unsigned long),
unsigned long iobase)
{
struct subdev_8255_private *spriv;
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
spriv->iobase = iobase;
spriv->io = io ? io : subdev_8255_io;
s->private = spriv;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = 24;
s->range_table = &range_digital;
s->maxdata = 1;
s->insn_bits = subdev_8255_insn;
s->insn_config = subdev_8255_insn_config;
s->state = 0;
s->io_bits = 0;
subdev_8255_do_config(dev, s);
return 0;
}
EXPORT_SYMBOL_GPL(subdev_8255_init);
int subdev_8255_init_irq(struct comedi_device *dev, struct comedi_subdevice *s,
int (*io) (int, int, int, unsigned long),
unsigned long iobase)
{
int ret;
ret = subdev_8255_init(dev, s, io, iobase);
if (ret)
return ret;
s->do_cmdtest = subdev_8255_cmdtest;
s->do_cmd = subdev_8255_cmd;
s->cancel = subdev_8255_cancel;
return 0;
}
EXPORT_SYMBOL_GPL(subdev_8255_init_irq);
/*
Start of the 8255 standalone device
*/
static int dev_8255_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
struct comedi_subdevice *s;
int ret;
unsigned long iobase;
int i;
for (i = 0; i < COMEDI_NDEVCONFOPTS; i++) {
iobase = it->options[i];
if (!iobase)
break;
}
if (i == 0) {
dev_warn(dev->class_dev, "no devices specified\n");
return -EINVAL;
}
ret = comedi_alloc_subdevices(dev, i);
if (ret)
return ret;
for (i = 0; i < dev->n_subdevices; i++) {
s = &dev->subdevices[i];
iobase = it->options[i];
ret = __comedi_request_region(dev, iobase, _8255_SIZE);
if (ret) {
s->type = COMEDI_SUBD_UNUSED;
} else {
ret = subdev_8255_init(dev, s, NULL, iobase);
if (ret)
return ret;
}
}
return 0;
}
static void dev_8255_detach(struct comedi_device *dev)
{
struct comedi_subdevice *s;
struct subdev_8255_private *spriv;
int i;
for (i = 0; i < dev->n_subdevices; i++) {
s = &dev->subdevices[i];
if (s->type != COMEDI_SUBD_UNUSED) {
spriv = s->private;
release_region(spriv->iobase, _8255_SIZE);
}
comedi_spriv_free(dev, i);
}
}
static struct comedi_driver dev_8255_driver = {
.driver_name = "8255",
.module = THIS_MODULE,
.attach = dev_8255_attach,
.detach = dev_8255_detach,
};
module_comedi_driver(dev_8255_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
|