Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 | /*
* Watchdog driver for the SA11x0/PXA2xx
*
* (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
* Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
* (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
*
* 27/11/2000 Initial release
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/timex.h>
#ifdef CONFIG_ARCH_PXA
#include <mach/regs-ost.h>
#endif
#include <mach/reset.h>
#include <mach/hardware.h>
static unsigned long oscr_freq;
static unsigned long sa1100wdt_users;
static unsigned int pre_margin;
static int boot_status;
/*
* Allow only one person to hold it open
*/
static int sa1100dog_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(1, &sa1100wdt_users))
return -EBUSY;
/* Activate SA1100 Watchdog timer */
OSMR3 = OSCR + pre_margin;
OSSR = OSSR_M3;
OWER = OWER_WME;
OIER |= OIER_E3;
return nonseekable_open(inode, file);
}
/*
* The watchdog cannot be disabled.
*
* Previous comments suggested that turning off the interrupt by
* clearing OIER[E3] would prevent the watchdog timing out but this
* does not appear to be true (at least on the PXA255).
*/
static int sa1100dog_release(struct inode *inode, struct file *file)
{
printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
clear_bit(1, &sa1100wdt_users);
return 0;
}
static ssize_t sa1100dog_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
if (len)
/* Refresh OSMR3 timer. */
OSMR3 = OSCR + pre_margin;
return len;
}
static const struct watchdog_info ident = {
.options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT
| WDIOF_KEEPALIVEPING,
.identity = "SA1100/PXA255 Watchdog",
.firmware_version = 1,
};
static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int ret = -ENOTTY;
int time;
void __user *argp = (void __user *)arg;
int __user *p = argp;
switch (cmd) {
case WDIOC_GETSUPPORT:
ret = copy_to_user(argp, &ident,
sizeof(ident)) ? -EFAULT : 0;
break;
case WDIOC_GETSTATUS:
ret = put_user(0, p);
break;
case WDIOC_GETBOOTSTATUS:
ret = put_user(boot_status, p);
break;
case WDIOC_KEEPALIVE:
OSMR3 = OSCR + pre_margin;
ret = 0;
break;
case WDIOC_SETTIMEOUT:
ret = get_user(time, p);
if (ret)
break;
if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
ret = -EINVAL;
break;
}
pre_margin = oscr_freq * time;
OSMR3 = OSCR + pre_margin;
/*fall through*/
case WDIOC_GETTIMEOUT:
ret = put_user(pre_margin / oscr_freq, p);
break;
}
return ret;
}
static const struct file_operations sa1100dog_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = sa1100dog_write,
.unlocked_ioctl = sa1100dog_ioctl,
.open = sa1100dog_open,
.release = sa1100dog_release,
};
static struct miscdevice sa1100dog_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &sa1100dog_fops,
};
static int margin __initdata = 60; /* (secs) Default is 1 minute */
static int __init sa1100dog_init(void)
{
int ret;
oscr_freq = get_clock_tick_rate();
/*
* Read the reset status, and save it for later. If
* we suspend, RCSR will be cleared, and the watchdog
* reset reason will be lost.
*/
boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
WDIOF_CARDRESET : 0;
pre_margin = oscr_freq * margin;
ret = misc_register(&sa1100dog_miscdev);
if (ret == 0)
printk(KERN_INFO
"SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
margin);
return ret;
}
static void __exit sa1100dog_exit(void)
{
misc_deregister(&sa1100dog_miscdev);
}
module_init(sa1100dog_init);
module_exit(sa1100dog_exit);
MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
module_param(margin, int, 0);
MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|