Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 | /* linux/arch/arm/mach-s3c2443/clock.c
*
* Copyright (c) 2007, 2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2443 Clock control support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/cpu-freq.h>
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
* fed from it, as we cannot read the state of OM[4] from
* software.
*
* It would be possible for each board initialisation to
* set the correct muxing at initialisation
*/
/* clock selections */
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
.id = -1,
};
/* armdiv
*
* this clock is sourced from msysclk and can have a number of
* divider values applied to it to then be fed into armclk.
*/
/* armdiv divisor table */
static unsigned int armdiv[16] = {
[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
};
static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
{
clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
}
static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
unsigned long rate)
{
unsigned long parent = clk_get_rate(clk->parent);
unsigned long calc;
unsigned best = 256; /* bigger than any value */
unsigned div;
int ptr;
for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
div = armdiv[ptr];
calc = parent / div;
if (calc <= rate && div < best)
best = div;
}
return parent / best;
}
static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
{
unsigned long parent = clk_get_rate(clk->parent);
unsigned long calc;
unsigned div;
unsigned best = 256; /* bigger than any value */
int ptr;
int val = -1;
for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
div = armdiv[ptr];
calc = parent / div;
if (calc <= rate && div < best) {
best = div;
val = ptr;
}
}
if (val >= 0) {
unsigned long clkcon0;
clkcon0 = __raw_readl(S3C2443_CLKDIV0);
clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
__raw_writel(clkcon0, S3C2443_CLKDIV0);
}
return (val == -1) ? -EINVAL : 0;
}
static struct clk clk_armdiv = {
.name = "armdiv",
.id = -1,
.parent = &clk_msysclk.clk,
.ops = &(struct clk_ops) {
.round_rate = s3c2443_armclk_roundrate,
.set_rate = s3c2443_armclk_setrate,
},
};
/* armclk
*
* this is the clock fed into the ARM core itself, from armdiv or from hclk.
*/
static struct clk *clk_arm_sources[] = {
[0] = &clk_armdiv,
[1] = &clk_h,
};
static struct clksrc_clk clk_arm = {
.clk = {
.name = "armclk",
.id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_arm_sources,
.nr_sources = ARRAY_SIZE(clk_arm_sources),
},
.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
};
/* hsspi
*
* high-speed spi clock, sourced from esysclk
*/
static struct clksrc_clk clk_hsspi = {
.clk = {
.name = "hsspi",
.id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_HSSPICLK,
.enable = s3c2443_clkcon_enable_s,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
/* clk_hsmcc_div
*
* this clock is sourced from epll, and is fed through a divider,
* to a mux controlled by sclkcon where either it or a extclk can
* be fed to the hsmmc block
*/
static struct clksrc_clk clk_hsmmc_div = {
.clk = {
.name = "hsmmc-div",
.id = -1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
};
static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
{
unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
S3C2443_SCLKCON_HSMMCCLK_EPLL);
if (parent == &clk_epll)
clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
else if (parent == &clk_ext)
clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
else
return -EINVAL;
if (clk->usage > 0) {
__raw_writel(clksrc, S3C2443_SCLKCON);
}
clk->parent = parent;
return 0;
}
static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
{
return s3c2443_setparent_hsmmc(clk, clk->parent);
}
static struct clk clk_hsmmc = {
.name = "hsmmc-if",
.id = -1,
.parent = &clk_hsmmc_div.clk,
.enable = s3c2443_enable_hsmmc,
.ops = &(struct clk_ops) {
.set_parent = s3c2443_setparent_hsmmc,
},
};
/* i2s_eplldiv
*
* This clock is the output from the I2S divisor of ESYSCLK, and is separate
* from the mux that comes after it (cannot merge into one single clock)
*/
static struct clksrc_clk clk_i2s_eplldiv = {
.clk = {
.name = "i2s-eplldiv",
.id = -1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
};
/* i2s-ref
*
* i2s bus reference clock, selectable from external, esysclk or epllref
*
* Note, this used to be two clocks, but was compressed into one.
*/
struct clk *clk_i2s_srclist[] = {
[0] = &clk_i2s_eplldiv.clk,
[1] = &clk_i2s_ext,
[2] = &clk_epllref.clk,
[3] = &clk_epllref.clk,
};
static struct clksrc_clk clk_i2s = {
.clk = {
.name = "i2s-if",
.id = -1,
.ctrlbit = S3C2443_SCLKCON_I2SCLK,
.enable = s3c2443_clkcon_enable_s,
},
.sources = &(struct clksrc_sources) {
.sources = clk_i2s_srclist,
.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
},
.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
};
/* standard clock definitions */
static struct clk init_clocks_off[] = {
{
.name = "sdi",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SDI,
}, {
.name = "iis",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_IIS,
}, {
.name = "spi",
.id = 0,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SPI0,
}, {
.name = "spi",
.id = 1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SPI1,
}
};
static struct clk init_clocks[] = {
};
/* clocks to add straight away */
static struct clksrc_clk *clksrcs[] __initdata = {
&clk_arm,
&clk_i2s_eplldiv,
&clk_i2s,
&clk_hsspi,
&clk_hsmmc_div,
};
static struct clk *clks[] __initdata = {
&clk_hsmmc,
&clk_armdiv,
};
void __init_or_cpufreq s3c2443_setup_clocks(void)
{
s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
}
void __init s3c2443_init_clocks(int xtal)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
int ptr;
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
clk_epll.parent = &clk_epllref.clk;
s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
s3c2443_setup_clocks();
s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
/* register clocks from clock array */
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*
* Disabling the LCD clock if the LCD is active is very dangerous,
* and therefore the bootloader should be careful to not enable
* the LCD clock if it is not needed.
*/
/* install (and disable) the clocks we do not need immediately */
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_pwmclk_init();
}
|