Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 | /*
* Sets up interrupt handlers for various hardware switches which are
* connected to interrupt lines.
*
* Copyright 2005-2207 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <msp_int.h>
#include <msp_regs.h>
#include <msp_regops.h>
#ifdef CONFIG_PMCTWILED
#include <msp_led_macros.h>
#endif
/* For hwbutton_interrupt->initial_state */
#define HWBUTTON_HI 0x1
#define HWBUTTON_LO 0x2
/*
* This struct describes a hardware button
*/
struct hwbutton_interrupt {
char *name; /* Name of button */
int irq; /* Actual LINUX IRQ */
int eirq; /* Extended IRQ number (0-7) */
int initial_state; /* The "normal" state of the switch */
void (*handle_hi)(void *); /* Handler: switch input has gone HI */
void (*handle_lo)(void *); /* Handler: switch input has gone LO */
void *data; /* Optional data to pass to handler */
};
#ifdef CONFIG_PMC_MSP7120_GW
extern void msp_restart(char *);
static void softreset_push(void *data)
{
printk(KERN_WARNING "SOFTRESET switch was pushed\n");
/*
* In the future you could move this to the release handler,
* timing the difference between the 'push' and 'release', and only
* doing this ungraceful restart if the button has been down for
* a certain amount of time; otherwise doing a graceful restart.
*/
msp_restart(NULL);
}
static void softreset_release(void *data)
{
printk(KERN_WARNING "SOFTRESET switch was released\n");
/* Do nothing */
}
static void standby_on(void *data)
{
printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n");
/* TODO: Put board in standby mode */
#ifdef CONFIG_PMCTWILED
msp_led_turn_off(MSP_LED_PWRSTANDBY_GREEN);
msp_led_turn_on(MSP_LED_PWRSTANDBY_RED);
#endif
}
static void standby_off(void *data)
{
printk(KERN_WARNING
"STANDBY switch was set to OFF (not implemented)\n");
/* TODO: Take out of standby mode */
#ifdef CONFIG_PMCTWILED
msp_led_turn_on(MSP_LED_PWRSTANDBY_GREEN);
msp_led_turn_off(MSP_LED_PWRSTANDBY_RED);
#endif
}
static struct hwbutton_interrupt softreset_sw = {
.name = "Softreset button",
.irq = MSP_INT_EXT0,
.eirq = 0,
.initial_state = HWBUTTON_HI,
.handle_hi = softreset_release,
.handle_lo = softreset_push,
.data = NULL,
};
static struct hwbutton_interrupt standby_sw = {
.name = "Standby switch",
.irq = MSP_INT_EXT1,
.eirq = 1,
.initial_state = HWBUTTON_HI,
.handle_hi = standby_off,
.handle_lo = standby_on,
.data = NULL,
};
#endif /* CONFIG_PMC_MSP7120_GW */
static irqreturn_t hwbutton_handler(int irq, void *data)
{
struct hwbutton_interrupt *hirq = data;
unsigned long cic_ext = *CIC_EXT_CFG_REG;
if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
/* Interrupt: pin is now HI */
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
hirq->handle_hi(hirq->data);
} else {
/* Interrupt: pin is now LO */
CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
hirq->handle_lo(hirq->data);
}
/*
* Invert the POLARITY of this level interrupt to ack the interrupt
* Thus next state change will invoke the opposite message
*/
*CIC_EXT_CFG_REG = cic_ext;
return IRQ_HANDLED;
}
static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
{
unsigned long cic_ext;
if (hirq->handle_hi == NULL || hirq->handle_lo == NULL)
return -EINVAL;
cic_ext = *CIC_EXT_CFG_REG;
CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq);
if (hirq->initial_state == HWBUTTON_HI)
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
else
CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
*CIC_EXT_CFG_REG = cic_ext;
return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED,
hirq->name, hirq);
}
static int __init msp_hwbutton_setup(void)
{
#ifdef CONFIG_PMC_MSP7120_GW
msp_hwbutton_register(&softreset_sw);
msp_hwbutton_register(&standby_sw);
#endif
return 0;
}
subsys_initcall(msp_hwbutton_setup);
|