Free Electrons

Embedded Linux Experts

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
/*
 * Copyright (C) 2008 Per Dalen <per.dalen@cnw.se>
 *
 * Parts of this software are based on (derived) the following:
 *
 * - Kvaser linux driver, version 4.72 BETA
 *   Copyright (C) 2002-2007 KVASER AB
 *
 * - Lincan driver, version 0.3.3, OCERA project
 *   Copyright (C) 2004 Pavel Pisa
 *   Copyright (C) 2001 Arnaud Westenberg
 *
 * - Socketcan SJA1000 drivers
 *   Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
 *   Copyright (c) 2002-2007 Volkswagen Group Electronic Research
 *   Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
 *   38106 Braunschweig, GERMANY
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the version 2 of the GNU General Public License
 * as published by the Free Software Foundation
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#include <linux/io.h>

#include "sja1000.h"

#define DRV_NAME  "kvaser_pci"

MODULE_AUTHOR("Per Dalen <per.dalen@cnw.se>");
MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards");
MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card");
MODULE_LICENSE("GPL v2");

#define MAX_NO_OF_CHANNELS        4 /* max no of channels on a single card */

struct kvaser_pci {
	int channel;
	struct pci_dev *pci_dev;
	struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1];
	void __iomem *conf_addr;
	void __iomem *res_addr;
	int no_channels;
	u8 xilinx_ver;
};

#define KVASER_PCI_CAN_CLOCK      (16000000 / 2)

/*
 * The board configuration is probably following:
 * RX1 is connected to ground.
 * TX1 is not connected.
 * CLKO is not connected.
 * Setting the OCR register to 0xDA is a good idea.
 * This means  normal output mode , push-pull and the correct polarity.
 */
#define KVASER_PCI_OCR            (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)

/*
 * In the CDR register, you should set CBP to 1.
 * You will probably also want to set the clock divider value to 0
 * (meaning divide-by-2), the Pelican bit, and the clock-off bit
 * (you will have no need for CLKOUT anyway).
 */
#define KVASER_PCI_CDR            (CDR_CBP | CDR_CLKOUT_MASK)

/*
 * These register values are valid for revision 14 of the Xilinx logic.
 */
#define XILINX_VERINT             7   /* Lower nibble simulate interrupts,
					 high nibble version number. */

#define XILINX_PRESUMED_VERSION   14

/*
 * Important S5920 registers
 */
#define S5920_INTCSR              0x38
#define S5920_PTCR                0x60
#define INTCSR_ADDON_INTENABLE_M  0x2000


#define KVASER_PCI_PORT_BYTES     0x20

#define PCI_CONFIG_PORT_SIZE      0x80      /* size of the config io-memory */
#define PCI_PORT_SIZE             0x80      /* size of a channel io-memory */
#define PCI_PORT_XILINX_SIZE      0x08      /* size of a xilinx io-memory */

#define KVASER_PCI_VENDOR_ID1     0x10e8    /* the PCI device and vendor IDs */
#define KVASER_PCI_DEVICE_ID1     0x8406

#define KVASER_PCI_VENDOR_ID2     0x1a07    /* the PCI device and vendor IDs */
#define KVASER_PCI_DEVICE_ID2     0x0008

static struct pci_device_id kvaser_pci_tbl[] = {
	{KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,},
	{KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,},
	{ 0,}
};

MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl);

static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port)
{
	return ioread8(priv->reg_base + port);
}

static void kvaser_pci_write_reg(const struct sja1000_priv *priv,
				 int port, u8 val)
{
	iowrite8(val, priv->reg_base + port);
}

static void kvaser_pci_disable_irq(struct net_device *dev)
{
	struct sja1000_priv *priv = netdev_priv(dev);
	struct kvaser_pci *board = priv->priv;
	u32 intcsr;

	/* Disable interrupts from card */
	intcsr = ioread32(board->conf_addr + S5920_INTCSR);
	intcsr &= ~INTCSR_ADDON_INTENABLE_M;
	iowrite32(intcsr, board->conf_addr + S5920_INTCSR);
}

static void kvaser_pci_enable_irq(struct net_device *dev)
{
	struct sja1000_priv *priv = netdev_priv(dev);
	struct kvaser_pci *board = priv->priv;
	u32 tmp_en_io;

	/* Enable interrupts from card */
	tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR);
	tmp_en_io |= INTCSR_ADDON_INTENABLE_M;
	iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR);
}

static int number_of_sja1000_chip(void __iomem *base_addr)
{
	u8 status;
	int i;

	for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
		/* reset chip */
		iowrite8(MOD_RM, base_addr +
			 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
		status = ioread8(base_addr +
				 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
		/* check reset bit */
		if (!(status & MOD_RM))
			break;
	}

	return i;
}

static void kvaser_pci_del_chan(struct net_device *dev)
{
	struct sja1000_priv *priv;
	struct kvaser_pci *board;
	int i;

	if (!dev)
		return;
	priv = netdev_priv(dev);
	board = priv->priv;
	if (!board)
		return;

	dev_info(&board->pci_dev->dev, "Removing device %s\n",
		 dev->name);

	/* Disable PCI interrupts */
	kvaser_pci_disable_irq(dev);

	for (i = 0; i < board->no_channels - 1; i++) {
		if (board->slave_dev[i]) {
			dev_info(&board->pci_dev->dev, "Removing device %s\n",
				 board->slave_dev[i]->name);
			unregister_sja1000dev(board->slave_dev[i]);
			free_sja1000dev(board->slave_dev[i]);
		}
	}
	unregister_sja1000dev(dev);

	pci_iounmap(board->pci_dev, priv->reg_base);
	pci_iounmap(board->pci_dev, board->conf_addr);
	pci_iounmap(board->pci_dev, board->res_addr);

	free_sja1000dev(dev);
}

static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
			       struct net_device **master_dev,
			       void __iomem *conf_addr,
			       void __iomem *res_addr,
			       void __iomem *base_addr)
{
	struct net_device *dev;
	struct sja1000_priv *priv;
	struct kvaser_pci *board;
	int err, init_step;

	dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
	if (dev == NULL)
		return -ENOMEM;

	priv = netdev_priv(dev);
	board = priv->priv;

	board->pci_dev = pdev;
	board->channel = channel;

	/* S5920 */
	board->conf_addr = conf_addr;

	/* XILINX board wide address */
	board->res_addr = res_addr;

	if (channel == 0) {
		board->xilinx_ver =
			ioread8(board->res_addr + XILINX_VERINT) >> 4;
		init_step = 2;

		/* Assert PTADR# - we're in passive mode so the other bits are
		   not important */
		iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR);

		/* Enable interrupts from card */
		kvaser_pci_enable_irq(dev);
	} else {
		struct sja1000_priv *master_priv = netdev_priv(*master_dev);
		struct kvaser_pci *master_board = master_priv->priv;
		master_board->slave_dev[channel - 1] = dev;
		master_board->no_channels = channel + 1;
		board->xilinx_ver = master_board->xilinx_ver;
	}

	priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES;

	priv->read_reg = kvaser_pci_read_reg;
	priv->write_reg = kvaser_pci_write_reg;

	priv->can.clock.freq = KVASER_PCI_CAN_CLOCK;

	priv->ocr = KVASER_PCI_OCR;
	priv->cdr = KVASER_PCI_CDR;

	priv->irq_flags = IRQF_SHARED;
	dev->irq = pdev->irq;

	init_step = 4;

	dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
		 priv->reg_base, board->conf_addr, dev->irq);

	SET_NETDEV_DEV(dev, &pdev->dev);

	/* Register SJA1000 device */
	err = register_sja1000dev(dev);
	if (err) {
		dev_err(&pdev->dev, "Registering device failed (err=%d)\n",
			err);
		goto failure;
	}

	if (channel == 0)
		*master_dev = dev;

	return 0;

failure:
	kvaser_pci_del_chan(dev);
	return err;
}

static int __devinit kvaser_pci_init_one(struct pci_dev *pdev,
					 const struct pci_device_id *ent)
{
	int err;
	struct net_device *master_dev = NULL;
	struct sja1000_priv *priv;
	struct kvaser_pci *board;
	int no_channels;
	void __iomem *base_addr = NULL;
	void __iomem *conf_addr = NULL;
	void __iomem *res_addr = NULL;
	int i;

	dev_info(&pdev->dev, "initializing device %04x:%04x\n",
		 pdev->vendor, pdev->device);

	err = pci_enable_device(pdev);
	if (err)
		goto failure;

	err = pci_request_regions(pdev, DRV_NAME);
	if (err)
		goto failure_release_pci;

	/* S5920 */
	conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE);
	if (conf_addr == NULL) {
		err = -ENODEV;
		goto failure_release_regions;
	}

	/* XILINX board wide address */
	res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE);
	if (res_addr == NULL) {
		err = -ENOMEM;
		goto failure_iounmap;
	}

	base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE);
	if (base_addr == NULL) {
		err = -ENOMEM;
		goto failure_iounmap;
	}

	no_channels = number_of_sja1000_chip(base_addr);
	if (no_channels == 0) {
		err = -ENOMEM;
		goto failure_iounmap;
	}

	for (i = 0; i < no_channels; i++) {
		err = kvaser_pci_add_chan(pdev, i, &master_dev,
					  conf_addr, res_addr,
					  base_addr);
		if (err)
			goto failure_cleanup;
	}

	priv = netdev_priv(master_dev);
	board = priv->priv;

	dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n",
		 board->xilinx_ver, board->no_channels);

	pci_set_drvdata(pdev, master_dev);
	return 0;

failure_cleanup:
	kvaser_pci_del_chan(master_dev);

failure_iounmap:
	if (conf_addr != NULL)
		pci_iounmap(pdev, conf_addr);
	if (res_addr != NULL)
		pci_iounmap(pdev, res_addr);
	if (base_addr != NULL)
		pci_iounmap(pdev, base_addr);

failure_release_regions:
	pci_release_regions(pdev);

failure_release_pci:
	pci_disable_device(pdev);

failure:
	return err;

}

static void __devexit kvaser_pci_remove_one(struct pci_dev *pdev)
{
	struct net_device *dev = pci_get_drvdata(pdev);

	kvaser_pci_del_chan(dev);

	pci_release_regions(pdev);
	pci_disable_device(pdev);
	pci_set_drvdata(pdev, NULL);
}

static struct pci_driver kvaser_pci_driver = {
	.name = DRV_NAME,
	.id_table = kvaser_pci_tbl,
	.probe = kvaser_pci_init_one,
	.remove = __devexit_p(kvaser_pci_remove_one),
};

static int __init kvaser_pci_init(void)
{
	return pci_register_driver(&kvaser_pci_driver);
}

static void __exit kvaser_pci_exit(void)
{
	pci_unregister_driver(&kvaser_pci_driver);
}

module_init(kvaser_pci_init);
module_exit(kvaser_pci_exit);