Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 | /*
* saa7185 - Philips SAA7185B video encoder driver version 0.0.3
*
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
*
* Slight changes for video timing and attachment output by
* Wolfgang Scherr <scherr@net4you.net>
*
* Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
* - moved over to linux>=2.4.x i2c protocol (1/1/2003)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/signal.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/types.h>
#include <linux/videodev.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("Philips SAA7185 video encoder driver");
MODULE_AUTHOR("Dave Perks");
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
#define I2C_NAME(s) (s)->name
#include <linux/video_encoder.h>
static int debug = 0;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define dprintk(num, format, args...) \
do { \
if (debug >= num) \
printk(format, ##args); \
} while (0)
/* ----------------------------------------------------------------------- */
struct saa7185 {
unsigned char reg[128];
int norm;
int enable;
int bright;
int contrast;
int hue;
int sat;
};
#define I2C_SAA7185 0x88
/* ----------------------------------------------------------------------- */
static inline int
saa7185_read (struct i2c_client *client)
{
return i2c_smbus_read_byte(client);
}
static int
saa7185_write (struct i2c_client *client,
u8 reg,
u8 value)
{
struct saa7185 *encoder = i2c_get_clientdata(client);
dprintk(1, KERN_DEBUG "SAA7185: %02x set to %02x\n", reg, value);
encoder->reg[reg] = value;
return i2c_smbus_write_byte_data(client, reg, value);
}
static int
saa7185_write_block (struct i2c_client *client,
const u8 *data,
unsigned int len)
{
int ret = -1;
u8 reg;
/* the adv7175 has an autoincrement function, use it if
* the adapter understands raw I2C */
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
/* do raw I2C, not smbus compatible */
struct saa7185 *encoder = i2c_get_clientdata(client);
u8 block_data[32];
int block_len;
while (len >= 2) {
block_len = 0;
block_data[block_len++] = reg = data[0];
do {
block_data[block_len++] =
encoder->reg[reg++] = data[1];
len -= 2;
data += 2;
} while (len >= 2 && data[0] == reg &&
block_len < 32);
if ((ret = i2c_master_send(client, block_data,
block_len)) < 0)
break;
}
} else {
/* do some slow I2C emulation kind of thing */
while (len >= 2) {
reg = *data++;
if ((ret = saa7185_write(client, reg,
*data++)) < 0)
break;
len -= 2;
}
}
return ret;
}
/* ----------------------------------------------------------------------- */
static const unsigned char init_common[] = {
0x3a, 0x0f, /* CBENB=0, V656=0, VY2C=1,
* YUV2C=1, MY2C=1, MUV2C=1 */
0x42, 0x6b, /* OVLY0=107 */
0x43, 0x00, /* OVLU0=0 white */
0x44, 0x00, /* OVLV0=0 */
0x45, 0x22, /* OVLY1=34 */
0x46, 0xac, /* OVLU1=172 yellow */
0x47, 0x0e, /* OVLV1=14 */
0x48, 0x03, /* OVLY2=3 */
0x49, 0x1d, /* OVLU2=29 cyan */
0x4a, 0xac, /* OVLV2=172 */
0x4b, 0xf0, /* OVLY3=240 */
0x4c, 0xc8, /* OVLU3=200 green */
0x4d, 0xb9, /* OVLV3=185 */
0x4e, 0xd4, /* OVLY4=212 */
0x4f, 0x38, /* OVLU4=56 magenta */
0x50, 0x47, /* OVLV4=71 */
0x51, 0xc1, /* OVLY5=193 */
0x52, 0xe3, /* OVLU5=227 red */
0x53, 0x54, /* OVLV5=84 */
0x54, 0xa3, /* OVLY6=163 */
0x55, 0x54, /* OVLU6=84 blue */
0x56, 0xf2, /* OVLV6=242 */
0x57, 0x90, /* OVLY7=144 */
0x58, 0x00, /* OVLU7=0 black */
0x59, 0x00, /* OVLV7=0 */
0x5a, 0x00, /* CHPS=0 */
0x5b, 0x76, /* GAINU=118 */
0x5c, 0xa5, /* GAINV=165 */
0x5d, 0x3c, /* BLCKL=60 */
0x5e, 0x3a, /* BLNNL=58 */
0x5f, 0x3a, /* CCRS=0, BLNVB=58 */
0x60, 0x00, /* NULL */
/* 0x61 - 0x66 set according to norm */
0x67, 0x00, /* 0 : caption 1st byte odd field */
0x68, 0x00, /* 0 : caption 2nd byte odd field */
0x69, 0x00, /* 0 : caption 1st byte even field */
0x6a, 0x00, /* 0 : caption 2nd byte even field */
0x6b, 0x91, /* MODIN=2, PCREF=0, SCCLN=17 */
0x6c, 0x20, /* SRCV1=0, TRCV2=1, ORCV1=0, PRCV1=0,
* CBLF=0, ORCV2=0, PRCV2=0 */
0x6d, 0x00, /* SRCM1=0, CCEN=0 */
0x6e, 0x0e, /* HTRIG=0x005, approx. centered, at
* least for PAL */
0x6f, 0x00, /* HTRIG upper bits */
0x70, 0x20, /* PHRES=0, SBLN=1, VTRIG=0 */
/* The following should not be needed */
0x71, 0x15, /* BMRQ=0x115 */
0x72, 0x90, /* EMRQ=0x690 */
0x73, 0x61, /* EMRQ=0x690, BMRQ=0x115 */
0x74, 0x00, /* NULL */
0x75, 0x00, /* NULL */
0x76, 0x00, /* NULL */
0x77, 0x15, /* BRCV=0x115 */
0x78, 0x90, /* ERCV=0x690 */
0x79, 0x61, /* ERCV=0x690, BRCV=0x115 */
/* Field length controls */
0x7a, 0x70, /* FLC=0 */
/* The following should not be needed if SBLN = 1 */
0x7b, 0x16, /* FAL=22 */
0x7c, 0x35, /* LAL=244 */
0x7d, 0x20, /* LAL=244, FAL=22 */
};
static const unsigned char init_pal[] = {
0x61, 0x1e, /* FISE=0, PAL=1, SCBW=1, RTCE=1,
* YGS=1, INPI=0, DOWN=0 */
0x62, 0xc8, /* DECTYP=1, BSTA=72 */
0x63, 0xcb, /* FSC0 */
0x64, 0x8a, /* FSC1 */
0x65, 0x09, /* FSC2 */
0x66, 0x2a, /* FSC3 */
};
static const unsigned char init_ntsc[] = {
0x61, 0x1d, /* FISE=1, PAL=0, SCBW=1, RTCE=1,
* YGS=1, INPI=0, DOWN=0 */
0x62, 0xe6, /* DECTYP=1, BSTA=102 */
0x63, 0x1f, /* FSC0 */
0x64, 0x7c, /* FSC1 */
0x65, 0xf0, /* FSC2 */
0x66, 0x21, /* FSC3 */
};
static int
saa7185_command (struct i2c_client *client,
unsigned int cmd,
void *arg)
{
struct saa7185 *encoder = i2c_get_clientdata(client);
switch (cmd) {
case 0:
saa7185_write_block(client, init_common,
sizeof(init_common));
switch (encoder->norm) {
case VIDEO_MODE_NTSC:
saa7185_write_block(client, init_ntsc,
sizeof(init_ntsc));
break;
case VIDEO_MODE_PAL:
saa7185_write_block(client, init_pal,
sizeof(init_pal));
break;
}
break;
case ENCODER_GET_CAPABILITIES:
{
struct video_encoder_capability *cap = arg;
cap->flags =
VIDEO_ENCODER_PAL | VIDEO_ENCODER_NTSC |
VIDEO_ENCODER_SECAM | VIDEO_ENCODER_CCIR;
cap->inputs = 1;
cap->outputs = 1;
}
break;
case ENCODER_SET_NORM:
{
int *iarg = arg;
//saa7185_write_block(client, init_common, sizeof(init_common));
switch (*iarg) {
case VIDEO_MODE_NTSC:
saa7185_write_block(client, init_ntsc,
sizeof(init_ntsc));
break;
case VIDEO_MODE_PAL:
saa7185_write_block(client, init_pal,
sizeof(init_pal));
break;
case VIDEO_MODE_SECAM:
default:
return -EINVAL;
}
encoder->norm = *iarg;
}
break;
case ENCODER_SET_INPUT:
{
int *iarg = arg;
/* RJ: *iarg = 0: input is from SA7111
*iarg = 1: input is from ZR36060 */
switch (*iarg) {
case 0:
/* Switch RTCE to 1 */
saa7185_write(client, 0x61,
(encoder->reg[0x61] & 0xf7) | 0x08);
saa7185_write(client, 0x6e, 0x01);
break;
case 1:
/* Switch RTCE to 0 */
saa7185_write(client, 0x61,
(encoder->reg[0x61] & 0xf7) | 0x00);
/* SW: a slight sync problem... */
saa7185_write(client, 0x6e, 0x00);
break;
default:
return -EINVAL;
}
}
break;
case ENCODER_SET_OUTPUT:
{
int *iarg = arg;
/* not much choice of outputs */
if (*iarg != 0) {
return -EINVAL;
}
}
break;
case ENCODER_ENABLE_OUTPUT:
{
int *iarg = arg;
encoder->enable = !!*iarg;
saa7185_write(client, 0x61,
(encoder->reg[0x61] & 0xbf) |
(encoder->enable ? 0x00 : 0x40));
}
break;
default:
return -EINVAL;
}
return 0;
}
/* ----------------------------------------------------------------------- */
/*
* Generic i2c probe
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
*/
static unsigned short normal_i2c[] = { I2C_SAA7185 >> 1, I2C_CLIENT_END };
static unsigned short ignore = I2C_CLIENT_END;
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
};
static struct i2c_driver i2c_driver_saa7185;
static int
saa7185_detect_client (struct i2c_adapter *adapter,
int address,
int kind)
{
int i;
struct i2c_client *client;
struct saa7185 *encoder;
dprintk(1,
KERN_INFO
"saa7185.c: detecting saa7185 client on address 0x%x\n",
address << 1);
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (client == 0)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7185;
strlcpy(I2C_NAME(client), "saa7185", sizeof(I2C_NAME(client)));
encoder = kzalloc(sizeof(struct saa7185), GFP_KERNEL);
if (encoder == NULL) {
kfree(client);
return -ENOMEM;
}
encoder->norm = VIDEO_MODE_NTSC;
encoder->enable = 1;
i2c_set_clientdata(client, encoder);
i = i2c_attach_client(client);
if (i) {
kfree(client);
kfree(encoder);
return i;
}
i = saa7185_write_block(client, init_common, sizeof(init_common));
if (i >= 0) {
i = saa7185_write_block(client, init_ntsc,
sizeof(init_ntsc));
}
if (i < 0) {
dprintk(1, KERN_ERR "%s_attach: init error %d\n",
I2C_NAME(client), i);
} else {
dprintk(1,
KERN_INFO
"%s_attach: chip version %d at address 0x%x\n",
I2C_NAME(client), saa7185_read(client) >> 5,
client->addr << 1);
}
return 0;
}
static int
saa7185_attach_adapter (struct i2c_adapter *adapter)
{
dprintk(1,
KERN_INFO
"saa7185.c: starting probe for adapter %s (0x%x)\n",
I2C_NAME(adapter), adapter->id);
return i2c_probe(adapter, &addr_data, &saa7185_detect_client);
}
static int
saa7185_detach_client (struct i2c_client *client)
{
struct saa7185 *encoder = i2c_get_clientdata(client);
int err;
err = i2c_detach_client(client);
if (err) {
return err;
}
saa7185_write(client, 0x61, (encoder->reg[0x61]) | 0x40); /* SW: output off is active */
//saa7185_write(client, 0x3a, (encoder->reg[0x3a]) | 0x80); /* SW: color bar */
kfree(encoder);
kfree(client);
return 0;
}
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa7185 = {
.driver = {
.name = "saa7185", /* name */
},
.id = I2C_DRIVERID_SAA7185B,
.attach_adapter = saa7185_attach_adapter,
.detach_client = saa7185_detach_client,
.command = saa7185_command,
};
static int __init
saa7185_init (void)
{
return i2c_add_driver(&i2c_driver_saa7185);
}
static void __exit
saa7185_exit (void)
{
i2c_del_driver(&i2c_driver_saa7185);
}
module_init(saa7185_init);
module_exit(saa7185_exit);
|