Free Electrons

Embedded Linux Experts

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
/*
    Support for B2C2/BBTI Technisat Air2PC - ATSC

    Copyright (C) 2004 Taylor Jacob <rtjacob@earthlink.net>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

*/

/*
 * This driver needs external firmware. Please use the command
 * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
 * download/extract it, and then copy it to /usr/lib/hotplug/firmware.
 */
#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
#define CRC_CCIT_MASK 0x1021

#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>

#include "dvb_frontend.h"
#include "nxt2002.h"

struct nxt2002_state {

	struct i2c_adapter* i2c;
	struct dvb_frontend_ops ops;
	const struct nxt2002_config* config;
	struct dvb_frontend frontend;

	/* demodulator private data */
	u8 initialised:1;
};

static int debug;
#define dprintk(args...) \
	do { \
		if (debug) printk(KERN_DEBUG "nxt2002: " args); \
	} while (0)

static int i2c_writebytes (struct nxt2002_state* state, u8 reg, u8 *buf, u8 len)
{
	/* probbably a much better way or doing this */
	u8 buf2 [256],x;
	int err;
	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };

	buf2[0] = reg;
	for (x = 0 ; x < len ; x++)
		buf2[x+1] = buf[x];

	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
		printk ("%s: i2c write error (addr %02x, err == %i)\n",
			__FUNCTION__, state->config->demod_address, err);
		return -EREMOTEIO;
	}

	return 0;
}

static u8 i2c_readbytes (struct nxt2002_state* state, u8 reg, u8* buf, u8 len)
{
	u8 reg2 [] = { reg };

	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
			{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };

	int err;

	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
		printk ("%s: i2c read error (addr %02x, err == %i)\n",
			__FUNCTION__, state->config->demod_address, err);
		return -EREMOTEIO;
	}

	return 0;
}

static u16 nxt2002_crc(u16 crc, u8 c)
{

	u8 i;
	u16 input = (u16) c & 0xFF;

	input<<=8;
	for(i=0 ;i<8 ;i++) {
		if((crc ^ input) & 0x8000)
			crc=(crc<<1)^CRC_CCIT_MASK;
		else
			crc<<=1;
	input<<=1;
	}
	return crc;
}

static int nxt2002_writereg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
{
	u8 buf;
	dprintk("%s\n", __FUNCTION__);

	/* set multi register length */
	i2c_writebytes(state,0x34,&len,1);

	/* set mutli register register */
	i2c_writebytes(state,0x35,&reg,1);

	/* send the actual data */
	i2c_writebytes(state,0x36,data,len);

	/* toggle the multireg write bit*/
	buf = 0x02;
	i2c_writebytes(state,0x21,&buf,1);

	i2c_readbytes(state,0x21,&buf,1);

	if ((buf & 0x02) == 0)
		return 0;

	dprintk("Error writing multireg register %02X\n",reg);

	return 0;
}

static int nxt2002_readreg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
{
	u8 len2;
	dprintk("%s\n", __FUNCTION__);

	/* set multi register length */
	len2 = len & 0x80;
	i2c_writebytes(state,0x34,&len2,1);

	/* set mutli register register */
	i2c_writebytes(state,0x35,&reg,1);

	/* send the actual data */
	i2c_readbytes(state,reg,data,len);

	return 0;
}

static void nxt2002_microcontroller_stop (struct nxt2002_state* state)
{
	u8 buf[2],counter = 0;
	dprintk("%s\n", __FUNCTION__);

	buf[0] = 0x80;
	i2c_writebytes(state,0x22,buf,1);

	while (counter < 20) {
		i2c_readbytes(state,0x31,buf,1);
		if (buf[0] & 0x40)
			return;
		msleep(10);
		counter++;
	}

	dprintk("Timeout waiting for micro to stop.. This is ok after firmware upload\n");
	return;
}

static void nxt2002_microcontroller_start (struct nxt2002_state* state)
{
	u8 buf;
	dprintk("%s\n", __FUNCTION__);

	buf = 0x00;
	i2c_writebytes(state,0x22,&buf,1);
}

static int nxt2002_writetuner (struct nxt2002_state* state, u8* data)
{
	u8 buf,count = 0;

	dprintk("Tuner Bytes: %02X %02X %02X %02X\n",data[0],data[1],data[2],data[3]);

	dprintk("%s\n", __FUNCTION__);
	/* stop the micro first */
	nxt2002_microcontroller_stop(state);

	/* set the i2c transfer speed to the tuner */
	buf = 0x03;
	i2c_writebytes(state,0x20,&buf,1);

	/* setup to transfer 4 bytes via i2c */
	buf = 0x04;
	i2c_writebytes(state,0x34,&buf,1);

	/* write actual tuner bytes */
	i2c_writebytes(state,0x36,data,4);

	/* set tuner i2c address */
	buf = 0xC2;
	i2c_writebytes(state,0x35,&buf,1);

	/* write UC Opmode to begin transfer */
	buf = 0x80;
	i2c_writebytes(state,0x21,&buf,1);

	while (count < 20) {
		i2c_readbytes(state,0x21,&buf,1);
		if ((buf & 0x80)== 0x00)
			return 0;
		msleep(100);
		count++;
	}

	printk("nxt2002: timeout error writing tuner\n");
	return 0;
}

static void nxt2002_agc_reset(struct nxt2002_state* state)
{
	u8 buf;
	dprintk("%s\n", __FUNCTION__);

	buf = 0x08;
	i2c_writebytes(state,0x08,&buf,1);

	buf = 0x00;
	i2c_writebytes(state,0x08,&buf,1);

	return;
}

static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
{

	struct nxt2002_state* state = fe->demodulator_priv;
	u8 buf[256],written = 0,chunkpos = 0;
	u16 rambase,position,crc = 0;

	dprintk("%s\n", __FUNCTION__);
	dprintk("Firmware is %zu bytes\n",fw->size);

	/* Get the RAM base for this nxt2002 */
	i2c_readbytes(state,0x10,buf,1);

	if (buf[0] & 0x10)
		rambase = 0x1000;
	else
		rambase = 0x0000;

	dprintk("rambase on this nxt2002 is %04X\n",rambase);

	/* Hold the micro in reset while loading firmware */
	buf[0] = 0x80;
	i2c_writebytes(state,0x2B,buf,1);

	for (position = 0; position < fw->size ; position++) {
		if (written == 0) {
			crc = 0;
			chunkpos = 0x28;
			buf[0] = ((rambase + position) >> 8);
			buf[1] = (rambase + position) & 0xFF;
			buf[2] = 0x81;
			/* write starting address */
			i2c_writebytes(state,0x29,buf,3);
		}
		written++;
		chunkpos++;

		if ((written % 4) == 0)
			i2c_writebytes(state,chunkpos,&fw->data[position-3],4);

		crc = nxt2002_crc(crc,fw->data[position]);

		if ((written == 255) || (position+1 == fw->size)) {
			/* write remaining bytes of firmware */
			i2c_writebytes(state, chunkpos+4-(written %4),
				&fw->data[position-(written %4) + 1],
				written %4);
			buf[0] = crc << 8;
			buf[1] = crc & 0xFF;

			/* write crc */
			i2c_writebytes(state,0x2C,buf,2);

			/* do a read to stop things */
			i2c_readbytes(state,0x2A,buf,1);

			/* set transfer mode to complete */
			buf[0] = 0x80;
			i2c_writebytes(state,0x2B,buf,1);

			written = 0;
		}
	}

	printk ("done.\n");
	return 0;
};

static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
					     struct dvb_frontend_parameters *p)
{
	struct nxt2002_state* state = fe->demodulator_priv;
	u32 freq = 0;
	u16 tunerfreq = 0;
	u8 buf[4];

	freq = 44000 + ( p->frequency / 1000 );

	dprintk("freq = %d      p->frequency = %d\n",freq,p->frequency);

	tunerfreq = freq * 24/4000;

	buf[0] = (tunerfreq >> 8) & 0x7F;
	buf[1] = (tunerfreq & 0xFF);

	if (p->frequency <= 214000000) {
		buf[2] = 0x84 + (0x06 << 3);
		buf[3] = (p->frequency <= 172000000) ? 0x01 : 0x02;
	} else if (p->frequency <= 721000000) {
		buf[2] = 0x84 + (0x07 << 3);
		buf[3] = (p->frequency <= 467000000) ? 0x02 : 0x08;
	} else if (p->frequency <= 841000000) {
		buf[2] = 0x84 + (0x0E << 3);
		buf[3] = 0x08;
	} else {
		buf[2] = 0x84 + (0x0F << 3);
		buf[3] = 0x02;
	}

	/* write frequency information */
	nxt2002_writetuner(state,buf);

	/* reset the agc now that tuning has been completed */
	nxt2002_agc_reset(state);

	/* set target power level */
	switch (p->u.vsb.modulation) {
		case QAM_64:
		case QAM_256:
				buf[0] = 0x74;
				break;
		case VSB_8:
				buf[0] = 0x70;
				break;
		default:
				return -EINVAL;
				break;
	}
	i2c_writebytes(state,0x42,buf,1);

	/* configure sdm */
	buf[0] = 0x87;
	i2c_writebytes(state,0x57,buf,1);

	/* write sdm1 input */
	buf[0] = 0x10;
	buf[1] = 0x00;
	nxt2002_writereg_multibyte(state,0x58,buf,2);

	/* write sdmx input */
	switch (p->u.vsb.modulation) {
		case QAM_64:
				buf[0] = 0x68;
				break;
		case QAM_256:
				buf[0] = 0x64;
				break;
		case VSB_8:
				buf[0] = 0x60;
				break;
		default:
				return -EINVAL;
				break;
	}
	buf[1] = 0x00;
	nxt2002_writereg_multibyte(state,0x5C,buf,2);

	/* write adc power lpf fc */
	buf[0] = 0x05;
	i2c_writebytes(state,0x43,buf,1);

	/* write adc power lpf fc */
	buf[0] = 0x05;
	i2c_writebytes(state,0x43,buf,1);

	/* write accumulator2 input */
	buf[0] = 0x80;
	buf[1] = 0x00;
	nxt2002_writereg_multibyte(state,0x4B,buf,2);

	/* write kg1 */
	buf[0] = 0x00;
	i2c_writebytes(state,0x4D,buf,1);

	/* write sdm12 lpf fc */
	buf[0] = 0x44;
	i2c_writebytes(state,0x55,buf,1);

	/* write agc control reg */
	buf[0] = 0x04;
	i2c_writebytes(state,0x41,buf,1);

	/* write agc ucgp0 */
	switch (p->u.vsb.modulation) {
		case QAM_64:
				buf[0] = 0x02;
				break;
		case QAM_256:
				buf[0] = 0x03;
				break;
		case VSB_8:
				buf[0] = 0x00;
				break;
		default:
				return -EINVAL;
				break;
	}
	i2c_writebytes(state,0x30,buf,1);

	/* write agc control reg */
	buf[0] = 0x00;
	i2c_writebytes(state,0x41,buf,1);

	/* write accumulator2 input */
	buf[0] = 0x80;
	buf[1] = 0x00;
	nxt2002_writereg_multibyte(state,0x49,buf,2);
	nxt2002_writereg_multibyte(state,0x4B,buf,2);

	/* write agc control reg */
	buf[0] = 0x04;
	i2c_writebytes(state,0x41,buf,1);

	nxt2002_microcontroller_start(state);

	/* adjacent channel detection should be done here, but I don't
	have any stations with this need so I cannot test it */

	return 0;
}

static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
	struct nxt2002_state* state = fe->demodulator_priv;
	u8 lock;
	i2c_readbytes(state,0x31,&lock,1);

	*status = 0;
	if (lock & 0x20) {
		*status |= FE_HAS_SIGNAL;
		*status |= FE_HAS_CARRIER;
		*status |= FE_HAS_VITERBI;
		*status |= FE_HAS_SYNC;
		*status |= FE_HAS_LOCK;
	}
	return 0;
}

static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
{
	struct nxt2002_state* state = fe->demodulator_priv;
	u8 b[3];

	nxt2002_readreg_multibyte(state,0xE6,b,3);

	*ber = ((b[0] << 8) + b[1]) * 8;

	return 0;
}

static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
	struct nxt2002_state* state = fe->demodulator_priv;
	u8 b[2];
	u16 temp = 0;

	/* setup to read cluster variance */
	b[0] = 0x00;
	i2c_writebytes(state,0xA1,b,1);

	/* get multreg val */
	nxt2002_readreg_multibyte(state,0xA6,b,2);

	temp = (b[0] << 8) | b[1];
	*strength = ((0x7FFF - temp) & 0x0FFF) * 16;

	return 0;
}

static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
{

	struct nxt2002_state* state = fe->demodulator_priv;
	u8 b[2];
	u16 temp = 0, temp2;
	u32 snrdb = 0;

	/* setup to read cluster variance */
	b[0] = 0x00;
	i2c_writebytes(state,0xA1,b,1);

	/* get multreg val from 0xA6 */
	nxt2002_readreg_multibyte(state,0xA6,b,2);

	temp = (b[0] << 8) | b[1];
	temp2 = 0x7FFF - temp;

	/* snr will be in db */
	if (temp2 > 0x7F00)
		snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
	else if (temp2 > 0x7EC0)
		snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
	else if (temp2 > 0x7C00)
		snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
	else
		snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );

        /* the value reported back from the frontend will be FFFF=32db 0000=0db */

	*snr = snrdb * (0xFFFF/32000);

	return 0;
}

static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
	struct nxt2002_state* state = fe->demodulator_priv;
	u8 b[3];

	nxt2002_readreg_multibyte(state,0xE6,b,3);
	*ucblocks = b[2];

	return 0;
}

static int nxt2002_sleep(struct dvb_frontend* fe)
{
	return 0;
}

static int nxt2002_init(struct dvb_frontend* fe)
{
	struct nxt2002_state* state = fe->demodulator_priv;
	const struct firmware *fw;
	int ret;
	u8 buf[2];

	if (!state->initialised) {
		/* request the firmware, this will block until someone uploads it */
		printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
		ret = state->config->request_firmware(fe, &fw, NXT2002_DEFAULT_FIRMWARE);
		printk("nxt2002: Waiting for firmware upload(2)...\n");
		if (ret) {
			printk("nxt2002: no firmware upload (timeout or file not found?)\n");
			return ret;
		}

		ret = nxt2002_load_firmware(fe, fw);
		if (ret) {
			printk("nxt2002: writing firmware to device failed\n");
			release_firmware(fw);
			return ret;
		}
		printk("nxt2002: firmware upload complete\n");

		/* Put the micro into reset */
		nxt2002_microcontroller_stop(state);

		/* ensure transfer is complete */
		buf[0]=0;
		i2c_writebytes(state,0x2B,buf,1);

		/* Put the micro into reset for real this time */
		nxt2002_microcontroller_stop(state);

		/* soft reset everything (agc,frontend,eq,fec)*/
		buf[0] = 0x0F;
		i2c_writebytes(state,0x08,buf,1);
		buf[0] = 0x00;
		i2c_writebytes(state,0x08,buf,1);

		/* write agc sdm configure */
		buf[0] = 0xF1;
		i2c_writebytes(state,0x57,buf,1);

		/* write mod output format */
		buf[0] = 0x20;
		i2c_writebytes(state,0x09,buf,1);

		/* write fec mpeg mode */
		buf[0] = 0x7E;
		buf[1] = 0x00;
		i2c_writebytes(state,0xE9,buf,2);

		/* write mux selection */
		buf[0] = 0x00;
		i2c_writebytes(state,0xCC,buf,1);

		state->initialised = 1;
	}

	return 0;
}

static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
	fesettings->min_delay_ms = 500;
	fesettings->step_size = 0;
	fesettings->max_drift = 0;
	return 0;
}

static void nxt2002_release(struct dvb_frontend* fe)
{
	struct nxt2002_state* state = fe->demodulator_priv;
	kfree(state);
}

static struct dvb_frontend_ops nxt2002_ops;

struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
				   struct i2c_adapter* i2c)
{
	struct nxt2002_state* state = NULL;
	u8 buf [] = {0,0,0,0,0};

	/* allocate memory for the internal state */
	state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
	if (state == NULL) goto error;

	/* setup the state */
	state->config = config;
	state->i2c = i2c;
	memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
	state->initialised = 0;

        /* Check the first 5 registers to ensure this a revision we can handle */

	i2c_readbytes(state, 0x00, buf, 5);
	if (buf[0] != 0x04) goto error;		/* device id */
	if (buf[1] != 0x02) goto error;		/* fab id */
	if (buf[2] != 0x11) goto error;		/* month */
	if (buf[3] != 0x20) goto error;		/* year msb */
	if (buf[4] != 0x00) goto error;		/* year lsb */

	/* create dvb_frontend */
	state->frontend.ops = &state->ops;
	state->frontend.demodulator_priv = state;
	return &state->frontend;

error:
	kfree(state);
	return NULL;
}

static struct dvb_frontend_ops nxt2002_ops = {

	.info = {
		.name = "Nextwave nxt2002 VSB/QAM frontend",
		.type = FE_ATSC,
		.frequency_min =  54000000,
		.frequency_max = 860000000,
                /* stepsize is just a guess */
		.frequency_stepsize = 166666,
		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
			FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
	},

	.release = nxt2002_release,

	.init = nxt2002_init,
	.sleep = nxt2002_sleep,

	.set_frontend = nxt2002_setup_frontend_parameters,
	.get_tune_settings = nxt2002_get_tune_settings,

	.read_status = nxt2002_read_status,
	.read_ber = nxt2002_read_ber,
	.read_signal_strength = nxt2002_read_signal_strength,
	.read_snr = nxt2002_read_snr,
	.read_ucblocks = nxt2002_read_ucblocks,

};

module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");

MODULE_DESCRIPTION("NXT2002 ATSC (8VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
MODULE_AUTHOR("Taylor Jacob");
MODULE_LICENSE("GPL");

EXPORT_SYMBOL(nxt2002_attach);