Free Electrons

Embedded Linux Experts

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
/*
   Driver for the Spase sp887x demodulator
*/

/*
 * This driver needs external firmware. Please use the command
 * "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to
 * download/extract it, and then copy it to /usr/lib/hotplug/firmware
 * or /lib/firmware (depending on configuration of firmware hotplug).
 */
#define SP887X_DEFAULT_FIRMWARE "dvb-fe-sp887x.fw"

#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/string.h>
#include <linux/slab.h>

#include "dvb_frontend.h"
#include "sp887x.h"


struct sp887x_state {
	struct i2c_adapter* i2c;
	const struct sp887x_config* config;
	struct dvb_frontend frontend;

	/* demodulator private data */
	u8 initialised:1;
};

static int debug;
#define dprintk(args...) \
	do { \
		if (debug) printk(KERN_DEBUG "sp887x: " args); \
	} while (0)

static int i2c_writebytes (struct sp887x_state* state, u8 *buf, u8 len)
{
	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = len };
	int err;

	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
		printk ("%s: i2c write error (addr %02x, err == %i)\n",
			__func__, state->config->demod_address, err);
		return -EREMOTEIO;
	}

	return 0;
}

static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
{
	u8 b0 [] = { reg >> 8 , reg & 0xff, data >> 8, data & 0xff };
	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 4 };
	int ret;

	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
		/**
		 *  in case of soft reset we ignore ACK errors...
		 */
		if (!(reg == 0xf1a && data == 0x000 &&
			(ret == -EREMOTEIO || ret == -EFAULT)))
		{
			printk("%s: writereg error (reg %03x, data %03x, ret == %i)\n",
			       __func__, reg & 0xffff, data & 0xffff, ret);
			return ret;
		}
	}

	return 0;
}

static int sp887x_readreg (struct sp887x_state* state, u16 reg)
{
	u8 b0 [] = { reg >> 8 , reg & 0xff };
	u8 b1 [2];
	int ret;
	struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
			 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};

	if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
		printk("%s: readreg error (ret == %i)\n", __func__, ret);
		return -1;
	}

	return (((b1[0] << 8) | b1[1]) & 0xfff);
}

static void sp887x_microcontroller_stop (struct sp887x_state* state)
{
	dprintk("%s\n", __func__);
	sp887x_writereg(state, 0xf08, 0x000);
	sp887x_writereg(state, 0xf09, 0x000);

	/* microcontroller STOP */
	sp887x_writereg(state, 0xf00, 0x000);
}

static void sp887x_microcontroller_start (struct sp887x_state* state)
{
	dprintk("%s\n", __func__);
	sp887x_writereg(state, 0xf08, 0x000);
	sp887x_writereg(state, 0xf09, 0x000);

	/* microcontroller START */
	sp887x_writereg(state, 0xf00, 0x001);
}

static void sp887x_setup_agc (struct sp887x_state* state)
{
	/* setup AGC parameters */
	dprintk("%s\n", __func__);
	sp887x_writereg(state, 0x33c, 0x054);
	sp887x_writereg(state, 0x33b, 0x04c);
	sp887x_writereg(state, 0x328, 0x000);
	sp887x_writereg(state, 0x327, 0x005);
	sp887x_writereg(state, 0x326, 0x001);
	sp887x_writereg(state, 0x325, 0x001);
	sp887x_writereg(state, 0x324, 0x001);
	sp887x_writereg(state, 0x318, 0x050);
	sp887x_writereg(state, 0x317, 0x3fe);
	sp887x_writereg(state, 0x316, 0x001);
	sp887x_writereg(state, 0x313, 0x005);
	sp887x_writereg(state, 0x312, 0x002);
	sp887x_writereg(state, 0x306, 0x000);
	sp887x_writereg(state, 0x303, 0x000);
}

#define BLOCKSIZE 30
#define FW_SIZE 0x4000
/**
 *  load firmware and setup MPEG interface...
 */
static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
{
	struct sp887x_state* state = fe->demodulator_priv;
	u8 buf [BLOCKSIZE+2];
	int i;
	int fw_size = fw->size;
	const unsigned char *mem = fw->data;

	dprintk("%s\n", __func__);

	/* ignore the first 10 bytes, then we expect 0x4000 bytes of firmware */
	if (fw_size < FW_SIZE+10)
		return -ENODEV;

	mem = fw->data + 10;

	/* soft reset */
	sp887x_writereg(state, 0xf1a, 0x000);

	sp887x_microcontroller_stop (state);

	printk ("%s: firmware upload... ", __func__);

	/* setup write pointer to -1 (end of memory) */
	/* bit 0x8000 in address is set to enable 13bit mode */
	sp887x_writereg(state, 0x8f08, 0x1fff);

	/* dummy write (wrap around to start of memory) */
	sp887x_writereg(state, 0x8f0a, 0x0000);

	for (i = 0; i < FW_SIZE; i += BLOCKSIZE) {
		int c = BLOCKSIZE;
		int err;

		if (i+c > FW_SIZE)
			c = FW_SIZE - i;

		/* bit 0x8000 in address is set to enable 13bit mode */
		/* bit 0x4000 enables multibyte read/write transfers */
		/* write register is 0xf0a */
		buf[0] = 0xcf;
		buf[1] = 0x0a;

		memcpy(&buf[2], mem + i, c);

		if ((err = i2c_writebytes (state, buf, c+2)) < 0) {
			printk ("failed.\n");
			printk ("%s: i2c error (err == %i)\n", __func__, err);
			return err;
		}
	}

	/* don't write RS bytes between packets */
	sp887x_writereg(state, 0xc13, 0x001);

	/* suppress clock if (!data_valid) */
	sp887x_writereg(state, 0xc14, 0x000);

	/* setup MPEG interface... */
	sp887x_writereg(state, 0xc1a, 0x872);
	sp887x_writereg(state, 0xc1b, 0x001);
	sp887x_writereg(state, 0xc1c, 0x000); /* parallel mode (serial mode == 1) */
	sp887x_writereg(state, 0xc1a, 0x871);

	/* ADC mode, 2 for MT8872, 3 for SP8870/SP8871 */
	sp887x_writereg(state, 0x301, 0x002);

	sp887x_setup_agc(state);

	/* bit 0x010: enable data valid signal */
	sp887x_writereg(state, 0xd00, 0x010);
	sp887x_writereg(state, 0x0d1, 0x000);
	return 0;
};

static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
{
	int known_parameters = 1;

	*reg0xc05 = 0x000;

	switch (p->modulation) {
	case QPSK:
		break;
	case QAM_16:
		*reg0xc05 |= (1 << 10);
		break;
	case QAM_64:
		*reg0xc05 |= (2 << 10);
		break;
	case QAM_AUTO:
		known_parameters = 0;
		break;
	default:
		return -EINVAL;
	}

	switch (p->hierarchy) {
	case HIERARCHY_NONE:
		break;
	case HIERARCHY_1:
		*reg0xc05 |= (1 << 7);
		break;
	case HIERARCHY_2:
		*reg0xc05 |= (2 << 7);
		break;
	case HIERARCHY_4:
		*reg0xc05 |= (3 << 7);
		break;
	case HIERARCHY_AUTO:
		known_parameters = 0;
		break;
	default:
		return -EINVAL;
	}

	switch (p->code_rate_HP) {
	case FEC_1_2:
		break;
	case FEC_2_3:
		*reg0xc05 |= (1 << 3);
		break;
	case FEC_3_4:
		*reg0xc05 |= (2 << 3);
		break;
	case FEC_5_6:
		*reg0xc05 |= (3 << 3);
		break;
	case FEC_7_8:
		*reg0xc05 |= (4 << 3);
		break;
	case FEC_AUTO:
		known_parameters = 0;
		break;
	default:
		return -EINVAL;
	}

	if (known_parameters)
		*reg0xc05 |= (2 << 1);	/* use specified parameters */
	else
		*reg0xc05 |= (1 << 1);	/* enable autoprobing */

	return 0;
}

/**
 *  estimates division of two 24bit numbers,
 *  derived from the ves1820/stv0299 driver code
 */
static void divide (int n, int d, int *quotient_i, int *quotient_f)
{
	unsigned int q, r;

	r = (n % d) << 8;
	q = (r / d);

	if (quotient_i)
		*quotient_i = q;

	if (quotient_f) {
		r = (r % d) << 8;
		q = (q << 8) | (r / d);
		r = (r % d) << 8;
		*quotient_f = (q << 8) | (r / d);
	}
}

static void sp887x_correct_offsets (struct sp887x_state* state,
				    struct dtv_frontend_properties *p,
				    int actual_freq)
{
	static const u32 srate_correction [] = { 1879617, 4544878, 8098561 };
	int bw_index;
	int freq_offset = actual_freq - p->frequency;
	int sysclock = 61003; //[kHz]
	int ifreq = 36000000;
	int freq;
	int frequency_shift;

	switch (p->bandwidth_hz) {
	default:
	case 8000000:
		bw_index = 0;
		break;
	case 7000000:
		bw_index = 1;
		break;
	case 6000000:
		bw_index = 2;
		break;
	}

	if (p->inversion == INVERSION_ON)
		freq = ifreq - freq_offset;
	else
		freq = ifreq + freq_offset;

	divide(freq / 333, sysclock, NULL, &frequency_shift);

	if (p->inversion == INVERSION_ON)
		frequency_shift = -frequency_shift;

	/* sample rate correction */
	sp887x_writereg(state, 0x319, srate_correction[bw_index] >> 12);
	sp887x_writereg(state, 0x31a, srate_correction[bw_index] & 0xfff);

	/* carrier offset correction */
	sp887x_writereg(state, 0x309, frequency_shift >> 12);
	sp887x_writereg(state, 0x30a, frequency_shift & 0xfff);
}

static int sp887x_setup_frontend_parameters(struct dvb_frontend *fe)
{
	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
	struct sp887x_state* state = fe->demodulator_priv;
	unsigned actual_freq;
	int err;
	u16 val, reg0xc05;

	if (p->bandwidth_hz != 8000000 &&
	    p->bandwidth_hz != 7000000 &&
	    p->bandwidth_hz != 6000000)
		return -EINVAL;

	if ((err = configure_reg0xc05(p, &reg0xc05)))
		return err;

	sp887x_microcontroller_stop(state);

	/* setup the PLL */
	if (fe->ops.tuner_ops.set_params) {
		fe->ops.tuner_ops.set_params(fe);
		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
	}
	if (fe->ops.tuner_ops.get_frequency) {
		fe->ops.tuner_ops.get_frequency(fe, &actual_freq);
		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
	} else {
		actual_freq = p->frequency;
	}

	/* read status reg in order to clear <pending irqs */
	sp887x_readreg(state, 0x200);

	sp887x_correct_offsets(state, p, actual_freq);

	/* filter for 6/7/8 Mhz channel */
	if (p->bandwidth_hz == 6000000)
		val = 2;
	else if (p->bandwidth_hz == 7000000)
		val = 1;
	else
		val = 0;

	sp887x_writereg(state, 0x311, val);

	/* scan order: 2k first = 0, 8k first = 1 */
	if (p->transmission_mode == TRANSMISSION_MODE_2K)
		sp887x_writereg(state, 0x338, 0x000);
	else
		sp887x_writereg(state, 0x338, 0x001);

	sp887x_writereg(state, 0xc05, reg0xc05);

	if (p->bandwidth_hz == 6000000)
		val = 2 << 3;
	else if (p->bandwidth_hz == 7000000)
		val = 3 << 3;
	else
		val = 0 << 3;

	/* enable OFDM and SAW bits as lock indicators in sync register 0xf17,
	 * optimize algorithm for given bandwidth...
	 */
	sp887x_writereg(state, 0xf14, 0x160 | val);
	sp887x_writereg(state, 0xf15, 0x000);

	sp887x_microcontroller_start(state);
	return 0;
}

static int sp887x_read_status(struct dvb_frontend *fe, enum fe_status *status)
{
	struct sp887x_state* state = fe->demodulator_priv;
	u16 snr12 = sp887x_readreg(state, 0xf16);
	u16 sync0x200 = sp887x_readreg(state, 0x200);
	u16 sync0xf17 = sp887x_readreg(state, 0xf17);

	*status = 0;

	if (snr12 > 0x00f)
		*status |= FE_HAS_SIGNAL;

	//if (sync0x200 & 0x004)
	//	*status |= FE_HAS_SYNC | FE_HAS_CARRIER;

	//if (sync0x200 & 0x008)
	//	*status |= FE_HAS_VITERBI;

	if ((sync0xf17 & 0x00f) == 0x002) {
		*status |= FE_HAS_LOCK;
		*status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_CARRIER;
	}

	if (sync0x200 & 0x001) {	/* tuner adjustment requested...*/
		int steps = (sync0x200 >> 4) & 0x00f;
		if (steps & 0x008)
			steps = -steps;
		dprintk("sp887x: implement tuner adjustment (%+i steps)!!\n",
		       steps);
	}

	return 0;
}

static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber)
{
	struct sp887x_state* state = fe->demodulator_priv;

	*ber = (sp887x_readreg(state, 0xc08) & 0x3f) |
	       (sp887x_readreg(state, 0xc07) << 6);
	sp887x_writereg(state, 0xc08, 0x000);
	sp887x_writereg(state, 0xc07, 0x000);
	if (*ber >= 0x3fff0)
		*ber = ~0;

	return 0;
}

static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
	struct sp887x_state* state = fe->demodulator_priv;

	u16 snr12 = sp887x_readreg(state, 0xf16);
	u32 signal = 3 * (snr12 << 4);
	*strength = (signal < 0xffff) ? signal : 0xffff;

	return 0;
}

static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr)
{
	struct sp887x_state* state = fe->demodulator_priv;

	u16 snr12 = sp887x_readreg(state, 0xf16);
	*snr = (snr12 << 4) | (snr12 >> 8);

	return 0;
}

static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
	struct sp887x_state* state = fe->demodulator_priv;

	*ucblocks = sp887x_readreg(state, 0xc0c);
	if (*ucblocks == 0xfff)
		*ucblocks = ~0;

	return 0;
}

static int sp887x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
{
	struct sp887x_state* state = fe->demodulator_priv;

	if (enable) {
		return sp887x_writereg(state, 0x206, 0x001);
	} else {
		return sp887x_writereg(state, 0x206, 0x000);
	}
}

static int sp887x_sleep(struct dvb_frontend* fe)
{
	struct sp887x_state* state = fe->demodulator_priv;

	/* tristate TS output and disable interface pins */
	sp887x_writereg(state, 0xc18, 0x000);

	return 0;
}

static int sp887x_init(struct dvb_frontend* fe)
{
	struct sp887x_state* state = fe->demodulator_priv;
	const struct firmware *fw = NULL;
	int ret;

	if (!state->initialised) {
		/* request the firmware, this will block until someone uploads it */
		printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE);
		ret = state->config->request_firmware(fe, &fw, SP887X_DEFAULT_FIRMWARE);
		if (ret) {
			printk("sp887x: no firmware upload (timeout or file not found?)\n");
			return ret;
		}

		ret = sp887x_initial_setup(fe, fw);
		release_firmware(fw);
		if (ret) {
			printk("sp887x: writing firmware to device failed\n");
			return ret;
		}
		printk("sp887x: firmware upload complete\n");
		state->initialised = 1;
	}

	/* enable TS output and interface pins */
	sp887x_writereg(state, 0xc18, 0x00d);

	return 0;
}

static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
	fesettings->min_delay_ms = 350;
	fesettings->step_size = 166666*2;
	fesettings->max_drift = (166666*2)+1;
	return 0;
}

static void sp887x_release(struct dvb_frontend* fe)
{
	struct sp887x_state* state = fe->demodulator_priv;
	kfree(state);
}

static const struct dvb_frontend_ops sp887x_ops;

struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
				   struct i2c_adapter* i2c)
{
	struct sp887x_state* state = NULL;

	/* allocate memory for the internal state */
	state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
	if (state == NULL) goto error;

	/* setup the state */
	state->config = config;
	state->i2c = i2c;
	state->initialised = 0;

	/* check if the demod is there */
	if (sp887x_readreg(state, 0x0200) < 0) goto error;

	/* create dvb_frontend */
	memcpy(&state->frontend.ops, &sp887x_ops, sizeof(struct dvb_frontend_ops));
	state->frontend.demodulator_priv = state;
	return &state->frontend;

error:
	kfree(state);
	return NULL;
}

static const struct dvb_frontend_ops sp887x_ops = {
	.delsys = { SYS_DVBT },
	.info = {
		.name = "Spase SP887x DVB-T",
		.frequency_min =  50500000,
		.frequency_max = 858000000,
		.frequency_stepsize = 166666,
		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
			FE_CAN_RECOVER
	},

	.release = sp887x_release,

	.init = sp887x_init,
	.sleep = sp887x_sleep,
	.i2c_gate_ctrl = sp887x_i2c_gate_ctrl,

	.set_frontend = sp887x_setup_frontend_parameters,
	.get_tune_settings = sp887x_get_tune_settings,

	.read_status = sp887x_read_status,
	.read_ber = sp887x_read_ber,
	.read_signal_strength = sp887x_read_signal_strength,
	.read_snr = sp887x_read_snr,
	.read_ucblocks = sp887x_read_ucblocks,
};

module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");

MODULE_DESCRIPTION("Spase sp887x DVB-T demodulator driver");
MODULE_LICENSE("GPL");

EXPORT_SYMBOL(sp887x_attach);