Free Electrons

Embedded Linux Experts

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
/*
 *  linux/arch/m68k/atari/config.c
 *
 *  Copyright (C) 1994 Bjoern Brauel
 *
 *  5/2/94 Roman Hodek:
 *    Added setting of time_adj to get a better clock.
 *
 *  5/14/94 Roman Hodek:
 *    gettod() for TT
 *
 *  5/15/94 Roman Hodek:
 *    hard_reset_now() for Atari (and others?)
 *
 *  94/12/30 Andreas Schwab:
 *    atari_sched_init fixed to get precise clock.
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive
 * for more details.
 */

/*
 * Miscellaneous atari stuff
 */

#include <linux/types.h>
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/console.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/usb/isp116x.h>
#include <linux/vt_kern.h>
#include <linux/module.h>

#include <asm/bootinfo.h>
#include <asm/bootinfo-atari.h>
#include <asm/byteorder.h>
#include <asm/setup.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/atari_stram.h>
#include <asm/machdep.h>
#include <asm/hwtest.h>
#include <asm/io.h>

u_long atari_mch_cookie;
EXPORT_SYMBOL(atari_mch_cookie);

u_long atari_mch_type;
EXPORT_SYMBOL(atari_mch_type);

struct atari_hw_present atari_hw_present;
EXPORT_SYMBOL(atari_hw_present);

u_long atari_switches;
EXPORT_SYMBOL(atari_switches);

int atari_dont_touch_floppy_select;
EXPORT_SYMBOL(atari_dont_touch_floppy_select);

int atari_rtc_year_offset;

/* local function prototypes */
static void atari_reset(void);
static void atari_get_model(char *model);
static void atari_get_hardware_list(struct seq_file *m);

/* atari specific irq functions */
extern void atari_init_IRQ (void);
extern void atari_mksound(unsigned int count, unsigned int ticks);
#ifdef CONFIG_HEARTBEAT
static void atari_heartbeat(int on);
#endif

/* atari specific timer functions (in time.c) */
extern void atari_sched_init(irq_handler_t);
extern u32 atari_gettimeoffset(void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
extern int atari_mste_set_clock_mmss (unsigned long);
extern int atari_tt_set_clock_mmss (unsigned long);


/* ++roman: This is a more elaborate test for an SCC chip, since the plain
 * Medusa board generates DTACK at the SCC's standard addresses, but a SCC
 * board in the Medusa is possible. Also, the addresses where the ST_ESCC
 * resides generate DTACK without the chip, too.
 * The method is to write values into the interrupt vector register, that
 * should be readable without trouble (from channel A!).
 */

static int __init scc_test(volatile char *ctla)
{
	if (!hwreg_present(ctla))
		return 0;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	*ctla = 0x40;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	if (*ctla != 0x40)
		return 0;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	*ctla = 0x60;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	if (*ctla != 0x60)
		return 0;

	return 1;
}


    /*
     *  Parse an Atari-specific record in the bootinfo
     */

int __init atari_parse_bootinfo(const struct bi_record *record)
{
	int unknown = 0;
	const void *data = record->data;

	switch (be16_to_cpu(record->tag)) {
	case BI_ATARI_MCH_COOKIE:
		atari_mch_cookie = be32_to_cpup(data);
		break;
	case BI_ATARI_MCH_TYPE:
		atari_mch_type = be32_to_cpup(data);
		break;
	default:
		unknown = 1;
		break;
	}
	return unknown;
}


/* Parse the Atari-specific switches= option. */
static int __init atari_switches_setup(char *str)
{
	char switches[strlen(str) + 1];
	char *p;
	int ovsc_shift;
	char *args = switches;

	if (!MACH_IS_ATARI)
		return 0;

	/* copy string to local array, strsep works destructively... */
	strcpy(switches, str);
	atari_switches = 0;

	/* parse the options */
	while ((p = strsep(&args, ",")) != NULL) {
		if (!*p)
			continue;
		ovsc_shift = 0;
		if (strncmp(p, "ov_", 3) == 0) {
			p += 3;
			ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
		}

		if (strcmp(p, "ikbd") == 0) {
			/* RTS line of IKBD ACIA */
			atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
		} else if (strcmp(p, "midi") == 0) {
			/* RTS line of MIDI ACIA */
			atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
		} else if (strcmp(p, "snd6") == 0) {
			atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
		} else if (strcmp(p, "snd7") == 0) {
			atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
		}
	}
	return 0;
}

early_param("switches", atari_switches_setup);


    /*
     *  Setup the Atari configuration info
     */

void __init config_atari(void)
{
	unsigned short tos_version;

	memset(&atari_hw_present, 0, sizeof(atari_hw_present));

	/* Change size of I/O space from 64KB to 4GB. */
	ioport_resource.end  = 0xFFFFFFFF;

	mach_sched_init      = atari_sched_init;
	mach_init_IRQ        = atari_init_IRQ;
	mach_get_model	 = atari_get_model;
	mach_get_hardware_list = atari_get_hardware_list;
	arch_gettimeoffset   = atari_gettimeoffset;
	mach_reset           = atari_reset;
	mach_max_dma_address = 0xffffff;
#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
	mach_beep          = atari_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
	mach_heartbeat = atari_heartbeat;
#endif

	/* Set switches as requested by the user */
	if (atari_switches & ATARI_SWITCH_IKBD)
		acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
	if (atari_switches & ATARI_SWITCH_MIDI)
		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
	if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
		sound_ym.rd_data_reg_sel = 14;
		sound_ym.wd_data = sound_ym.rd_data_reg_sel |
				   ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
				   ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
	}

	/* ++bjoern:
	 * Determine hardware present
	 */

	pr_info("Atari hardware found:");
	if (MACH_IS_MEDUSA) {
		/* There's no Atari video hardware on the Medusa, but all the
		 * addresses below generate a DTACK so no bus error occurs! */
	} else if (hwreg_present(f030_xreg)) {
		ATARIHW_SET(VIDEL_SHIFTER);
		pr_cont(" VIDEL");
		/* This is a temporary hack: If there is Falcon video
		 * hardware, we assume that the ST-DMA serves SCSI instead of
		 * ACSI. In the future, there should be a better method for
		 * this...
		 */
		ATARIHW_SET(ST_SCSI);
		pr_cont(" STDMA-SCSI");
	} else if (hwreg_present(tt_palette)) {
		ATARIHW_SET(TT_SHIFTER);
		pr_cont(" TT_SHIFTER");
	} else if (hwreg_present(&shifter.bas_hi)) {
		if (hwreg_present(&shifter.bas_lo) &&
		    (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
			ATARIHW_SET(EXTD_SHIFTER);
			pr_cont(" EXTD_SHIFTER");
		} else {
			ATARIHW_SET(STND_SHIFTER);
			pr_cont(" STND_SHIFTER");
		}
	}
	if (hwreg_present(&st_mfp.par_dt_reg)) {
		ATARIHW_SET(ST_MFP);
		pr_cont(" ST_MFP");
	}
	if (hwreg_present(&tt_mfp.par_dt_reg)) {
		ATARIHW_SET(TT_MFP);
		pr_cont(" TT_MFP");
	}
	if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
		ATARIHW_SET(SCSI_DMA);
		pr_cont(" TT_SCSI_DMA");
	}
	/*
	 * The ST-DMA address registers aren't readable
	 * on all Medusas, so the test below may fail
	 */
	if (MACH_IS_MEDUSA ||
	    (hwreg_present(&st_dma.dma_vhi) &&
	     (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
	     st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
	     (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
	     st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
		ATARIHW_SET(EXTD_DMA);
		pr_cont(" EXTD_DMA");
	}
	if (hwreg_present(&tt_scsi.scsi_data)) {
		ATARIHW_SET(TT_SCSI);
		pr_cont(" TT_SCSI");
	}
	if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
		ATARIHW_SET(YM_2149);
		pr_cont(" YM2149");
	}
	if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
		ATARIHW_SET(PCM_8BIT);
		pr_cont(" PCM");
	}
	if (hwreg_present(&falcon_codec.unused5)) {
		ATARIHW_SET(CODEC);
		pr_cont(" CODEC");
	}
	if (hwreg_present(&dsp56k_host_interface.icr)) {
		ATARIHW_SET(DSP56K);
		pr_cont(" DSP56K");
	}
	if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
#if 0
	    /* This test sucks! Who knows some better? */
	    (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
	    (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
#else
	    !MACH_IS_MEDUSA
#endif
	    ) {
		ATARIHW_SET(SCC_DMA);
		pr_cont(" SCC_DMA");
	}
	if (scc_test(&atari_scc.cha_a_ctrl)) {
		ATARIHW_SET(SCC);
		pr_cont(" SCC");
	}
	if (scc_test(&st_escc.cha_b_ctrl)) {
		ATARIHW_SET(ST_ESCC);
		pr_cont(" ST_ESCC");
	}
	if (hwreg_present(&tt_scu.sys_mask)) {
		ATARIHW_SET(SCU);
		/* Assume a VME bus if there's a SCU */
		ATARIHW_SET(VME);
		pr_cont(" VME SCU");
	}
	if (hwreg_present((void *)(0xffff9210))) {
		ATARIHW_SET(ANALOG_JOY);
		pr_cont(" ANALOG_JOY");
	}
	if (hwreg_present(blitter.halftone)) {
		ATARIHW_SET(BLITTER);
		pr_cont(" BLITTER");
	}
	if (hwreg_present((void *)0xfff00039)) {
		ATARIHW_SET(IDE);
		pr_cont(" IDE");
	}
#if 1 /* This maybe wrong */
	if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
	    hwreg_present(&tt_microwire.mask) &&
	    (tt_microwire.mask = 0x7ff,
	     udelay(1),
	     tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
	     udelay(1),
	     tt_microwire.data != 0)) {
		ATARIHW_SET(MICROWIRE);
		while (tt_microwire.mask != 0x7ff)
			;
		pr_cont(" MICROWIRE");
	}
#endif
	if (hwreg_present(&tt_rtc.regsel)) {
		ATARIHW_SET(TT_CLK);
		pr_cont(" TT_CLK");
		mach_hwclk = atari_tt_hwclk;
		mach_set_clock_mmss = atari_tt_set_clock_mmss;
	}
	if (hwreg_present(&mste_rtc.sec_ones)) {
		ATARIHW_SET(MSTE_CLK);
		pr_cont(" MSTE_CLK");
		mach_hwclk = atari_mste_hwclk;
		mach_set_clock_mmss = atari_mste_set_clock_mmss;
	}
	if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
	    hwreg_write(&dma_wd.fdc_speed, 0)) {
		ATARIHW_SET(FDCSPEED);
		pr_cont(" FDC_SPEED");
	}
	if (!ATARIHW_PRESENT(ST_SCSI)) {
		ATARIHW_SET(ACSI);
		pr_cont(" ACSI");
	}
	pr_cont("\n");

	if (CPU_IS_040_OR_060)
		/* Now it seems to be safe to turn of the tt0 transparent
		 * translation (the one that must not be turned off in
		 * head.S...)
		 */
		asm volatile ("\n"
			"	moveq	#0,%%d0\n"
			"	.chip	68040\n"
			"	movec	%%d0,%%itt0\n"
			"	movec	%%d0,%%dtt0\n"
			"	.chip	68k"
			: /* no outputs */
			: /* no inputs */
			: "d0");

	/* allocator for memory that must reside in st-ram */
	atari_stram_init();

	/* Set up a mapping for the VMEbus address region:
	 *
	 * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
	 * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
	 * 0xfe000000 virt., because this can be done with a single
	 * transparent translation. On the 68040, lots of often unused
	 * page tables would be needed otherwise. On a MegaSTE or similar,
	 * the highest byte is stripped off by hardware due to the 24 bit
	 * design of the bus.
	 */

	if (CPU_IS_020_OR_030) {
		unsigned long tt1_val;
		tt1_val = 0xfe008543;	/* Translate 0xfexxxxxx, enable, cache
					 * inhibit, read and write, FDC mask = 3,
					 * FDC val = 4 -> Supervisor only */
		asm volatile ("\n"
			"	.chip	68030\n"
			"	pmove	%0,%/tt1\n"
			"	.chip	68k"
			: : "m" (tt1_val));
	} else {
	        asm volatile ("\n"
			"	.chip	68040\n"
			"	movec	%0,%%itt1\n"
			"	movec	%0,%%dtt1\n"
			"	.chip	68k"
			:
			: "d" (0xfe00a040));	/* Translate 0xfexxxxxx, enable,
						 * supervisor only, non-cacheable/
						 * serialized, writable */

	}

	/* Fetch tos version at Physical 2 */
	/*
	 * We my not be able to access this address if the kernel is
	 * loaded to st ram, since the first page is unmapped.  On the
	 * Medusa this is always the case and there is nothing we can do
	 * about this, so we just assume the smaller offset.  For the TT
	 * we use the fact that in head.S we have set up a mapping
	 * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
	 * in the last 16MB of the address space.
	 */
	tos_version = (MACH_IS_MEDUSA) ?
			0xfff : *(unsigned short *)0xff000002;
	atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
}

#ifdef CONFIG_HEARTBEAT
static void atari_heartbeat(int on)
{
	unsigned char tmp;
	unsigned long flags;

	if (atari_dont_touch_floppy_select)
		return;

	local_irq_save(flags);
	sound_ym.rd_data_reg_sel = 14;	/* Select PSG Port A */
	tmp = sound_ym.rd_data_reg_sel;
	sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
	local_irq_restore(flags);
}
#endif

/* ++roman:
 *
 * This function does a reset on machines that lack the ability to
 * assert the processor's _RESET signal somehow via hardware. It is
 * based on the fact that you can find the initial SP and PC values
 * after a reset at physical addresses 0 and 4. This works pretty well
 * for Atari machines, since the lowest 8 bytes of physical memory are
 * really ROM (mapped by hardware). For other 680x0 machines: don't
 * know if it works...
 *
 * To get the values at addresses 0 and 4, the MMU better is turned
 * off first. After that, we have to jump into physical address space
 * (the PC before the pmove statement points to the virtual address of
 * the code). Getting that physical address is not hard, but the code
 * becomes a bit complex since I've tried to ensure that the jump
 * statement after the pmove is in the cache already (otherwise the
 * processor can't fetch it!). For that, the code first jumps to the
 * jump statement with the (virtual) address of the pmove section in
 * an address register . The jump statement is surely in the cache
 * now. After that, that physical address of the reset code is loaded
 * into the same address register, pmove is done and the same jump
 * statements goes to the reset code. Since there are not many
 * statements between the two jumps, I hope it stays in the cache.
 *
 * The C code makes heavy use of the GCC features that you can get the
 * address of a C label. No hope to compile this with another compiler
 * than GCC!
 */

/* ++andreas: no need for complicated code, just depend on prefetch */

static void atari_reset(void)
{
	long tc_val = 0;
	long reset_addr;

	/*
	 * On the Medusa, phys. 0x4 may contain garbage because it's no
	 * ROM.  See above for explanation why we cannot use PTOV(4).
	 */
	reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
		     *(unsigned long *) 0xff000004;

	/* reset ACIA for switch off OverScan, if it's active */
	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
		acia.key_ctrl = ACIA_RESET;
	if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
		acia.mid_ctrl = ACIA_RESET;

	/* processor independent: turn off interrupts and reset the VBR;
	 * the caches must be left enabled, else prefetching the final jump
	 * instruction doesn't work.
	 */
	local_irq_disable();
	asm volatile ("movec	%0,%%vbr"
			: : "d" (0));

	if (CPU_IS_040_OR_060) {
		unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
		if (CPU_IS_060) {
			/* 68060: clear PCR to turn off superscalar operation */
			asm volatile ("\n"
				"	.chip 68060\n"
				"	movec %0,%%pcr\n"
				"	.chip 68k"
				: : "d" (0));
		}

		asm volatile ("\n"
			"	move.l	%0,%%d0\n"
			"	and.l	#0xff000000,%%d0\n"
			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
			"	.chip	68040\n"
			"	movec	%%d0,%%itt0\n"
			"	movec	%%d0,%%dtt0\n"
			"	.chip	68k\n"
			"	jmp	%0@"
			: : "a" (jmp_addr040)
			: "d0");
	jmp_addr_label040:
		asm volatile ("\n"
			"	moveq	#0,%%d0\n"
			"	nop\n"
			"	.chip	68040\n"
			"	cinva	%%bc\n"
			"	nop\n"
			"	pflusha\n"
			"	nop\n"
			"	movec	%%d0,%%tc\n"
			"	nop\n"
			/* the following setup of transparent translations is needed on the
			 * Afterburner040 to successfully reboot. Other machines shouldn't
			 * care about a different tt regs setup, they also didn't care in
			 * the past that the regs weren't turned off. */
			"	move.l	#0xffc000,%%d0\n" /* whole insn space cacheable */
			"	movec	%%d0,%%itt0\n"
			"	movec	%%d0,%%itt1\n"
			"	or.w	#0x40,%/d0\n" /* whole data space non-cacheable/ser. */
			"	movec	%%d0,%%dtt0\n"
			"	movec	%%d0,%%dtt1\n"
			"	.chip	68k\n"
			"	jmp	%0@"
			: /* no outputs */
			: "a" (reset_addr)
			: "d0");
	} else
		asm volatile ("\n"
			"	pmove	%0,%%tc\n"
			"	jmp	%1@"
			: /* no outputs */
			: "m" (tc_val), "a" (reset_addr));
}


static void atari_get_model(char *model)
{
	strcpy(model, "Atari ");
	switch (atari_mch_cookie >> 16) {
	case ATARI_MCH_ST:
		if (ATARIHW_PRESENT(MSTE_CLK))
			strcat(model, "Mega ST");
		else
			strcat(model, "ST");
		break;
	case ATARI_MCH_STE:
		if (MACH_IS_MSTE)
			strcat(model, "Mega STE");
		else
			strcat(model, "STE");
		break;
	case ATARI_MCH_TT:
		if (MACH_IS_MEDUSA)
			/* Medusa has TT _MCH cookie */
			strcat(model, "Medusa");
		else
			strcat(model, "TT");
		break;
	case ATARI_MCH_FALCON:
		strcat(model, "Falcon");
		if (MACH_IS_AB40)
			strcat(model, " (with Afterburner040)");
		break;
	default:
		sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
			atari_mch_cookie);
		break;
	}
}


static void atari_get_hardware_list(struct seq_file *m)
{
	int i;

	for (i = 0; i < m68k_num_memory; i++)
		seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
				m68k_memory[i].size >> 20, m68k_memory[i].addr,
				(m68k_memory[i].addr & 0xff000000 ?
				 "alternate RAM" : "ST-RAM"));

#define ATARIHW_ANNOUNCE(name, str)			\
	if (ATARIHW_PRESENT(name))			\
		seq_printf(m, "\t%s\n", str)

	seq_puts(m, "Detected hardware:\n");
	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
	ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
	ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
	ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
	ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
	ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
	ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
	ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
	ATARIHW_ANNOUNCE(IDE, "IDE Interface");
	ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
	ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
	ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
	ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
	ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
	ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
	ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
	ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
	ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
	ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
	ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
	ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
	ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
	ATARIHW_ANNOUNCE(SCU, "System Control Unit");
	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
	ATARIHW_ANNOUNCE(VME, "VME Bus");
	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
}

/*
 * MSch: initial platform device support for Atari,
 * required for EtherNAT/EtherNEC/NetUSBee drivers
 */

#if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC)
static void isp1160_delay(struct device *dev, int delay)
{
	ndelay(delay);
}
#endif

#ifdef CONFIG_ATARI_ETHERNAT
/*
 * EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver
 */

#define ATARI_ETHERNAT_IRQ		140

static struct resource smc91x_resources[] = {
	[0] = {
		.name	= "smc91x-regs",
		.start	= ATARI_ETHERNAT_PHYS_ADDR,
		.end	= ATARI_ETHERNAT_PHYS_ADDR + 0xfffff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.name	= "smc91x-irq",
		.start	= ATARI_ETHERNAT_IRQ,
		.end	= ATARI_ETHERNAT_IRQ,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device smc91x_device = {
	.name		= "smc91x",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(smc91x_resources),
	.resource	= smc91x_resources,
};

/*
 * ISP 1160 - using the isp116x-hcd module
 */

#define ATARI_USB_PHYS_ADDR	0x80000012
#define ATARI_USB_IRQ		139

static struct resource isp1160_resources[] = {
	[0] = {
		.name	= "isp1160-data",
		.start	= ATARI_USB_PHYS_ADDR,
		.end	= ATARI_USB_PHYS_ADDR + 0x1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.name	= "isp1160-regs",
		.start	= ATARI_USB_PHYS_ADDR + 0x4,
		.end	= ATARI_USB_PHYS_ADDR + 0x5,
		.flags	= IORESOURCE_MEM,
	},
	[2] = {
		.name	= "isp1160-irq",
		.start	= ATARI_USB_IRQ,
		.end	= ATARI_USB_IRQ,
		.flags	= IORESOURCE_IRQ,
	},
};

/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
static struct isp116x_platform_data isp1160_platform_data = {
	/* Enable internal resistors on downstream ports */
	.sel15Kres		= 1,
	/* On-chip overcurrent protection */
	.oc_enable		= 1,
	/* INT output polarity */
	.int_act_high		= 1,
	/* INT edge or level triggered */
	.int_edge_triggered	= 0,

	/* WAKEUP pin connected - NOT SUPPORTED  */
	/* .remote_wakeup_connected = 0, */
	/* Wakeup by devices on usb bus enabled */
	.remote_wakeup_enable	= 0,
	.delay			= isp1160_delay,
};

static struct platform_device isp1160_device = {
	.name		= "isp116x-hcd",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(isp1160_resources),
	.resource	= isp1160_resources,
	.dev			= {
		.platform_data	= &isp1160_platform_data,
	},
};

static struct platform_device *atari_ethernat_devices[] __initdata = {
	&smc91x_device,
	&isp1160_device
};
#endif /* CONFIG_ATARI_ETHERNAT */

#ifdef CONFIG_ATARI_ETHERNEC
/*
 * EtherNEC: RTL8019 (NE2000 compatible) Ethernet chipset,
 * handled by ne.c driver
 */

#define ATARI_ETHERNEC_PHYS_ADDR	0xfffa0000
#define ATARI_ETHERNEC_BASE		0x300
#define ATARI_ETHERNEC_IRQ		IRQ_MFP_TIMER1

static struct resource rtl8019_resources[] = {
	[0] = {
		.name	= "rtl8019-regs",
		.start	= ATARI_ETHERNEC_BASE,
		.end	= ATARI_ETHERNEC_BASE + 0x20 - 1,
		.flags	= IORESOURCE_IO,
	},
	[1] = {
		.name	= "rtl8019-irq",
		.start	= ATARI_ETHERNEC_IRQ,
		.end	= ATARI_ETHERNEC_IRQ,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device rtl8019_device = {
	.name		= "ne",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(rtl8019_resources),
	.resource	= rtl8019_resources,
};

/*
 * NetUSBee: ISP1160 USB host adapter via ROM-port adapter
 */

#define ATARI_NETUSBEE_PHYS_ADDR	0xfffa8000
#define ATARI_NETUSBEE_BASE		0x340
#define ATARI_NETUSBEE_IRQ		IRQ_MFP_TIMER2

static struct resource netusbee_resources[] = {
	[0] = {
		.name	= "isp1160-data",
		.start	= ATARI_NETUSBEE_BASE,
		.end	= ATARI_NETUSBEE_BASE + 0x1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.name	= "isp1160-regs",
		.start	= ATARI_NETUSBEE_BASE + 0x20,
		.end	= ATARI_NETUSBEE_BASE + 0x21,
		.flags	= IORESOURCE_MEM,
	},
	[2] = {
		.name	= "isp1160-irq",
		.start	= ATARI_NETUSBEE_IRQ,
		.end	= ATARI_NETUSBEE_IRQ,
		.flags	= IORESOURCE_IRQ,
	},
};

/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
static struct isp116x_platform_data netusbee_platform_data = {
	/* Enable internal resistors on downstream ports */
	.sel15Kres		= 1,
	/* On-chip overcurrent protection */
	.oc_enable		= 1,
	/* INT output polarity */
	.int_act_high		= 1,
	/* INT edge or level triggered */
	.int_edge_triggered	= 0,

	/* WAKEUP pin connected - NOT SUPPORTED  */
	/* .remote_wakeup_connected = 0, */
	/* Wakeup by devices on usb bus enabled */
	.remote_wakeup_enable	= 0,
	.delay			= isp1160_delay,
};

static struct platform_device netusbee_device = {
	.name		= "isp116x-hcd",
	.id		= 1,
	.num_resources	= ARRAY_SIZE(netusbee_resources),
	.resource	= netusbee_resources,
	.dev			= {
		.platform_data	= &netusbee_platform_data,
	},
};

static struct platform_device *atari_netusbee_devices[] __initdata = {
	&rtl8019_device,
	&netusbee_device
};
#endif /* CONFIG_ATARI_ETHERNEC */

#if IS_ENABLED(CONFIG_ATARI_SCSI)
static const struct resource atari_scsi_st_rsrc[] __initconst = {
	{
		.flags = IORESOURCE_IRQ,
		.start = IRQ_MFP_FSCSI,
		.end   = IRQ_MFP_FSCSI,
	},
};

static const struct resource atari_scsi_tt_rsrc[] __initconst = {
	{
		.flags = IORESOURCE_IRQ,
		.start = IRQ_TT_MFP_SCSI,
		.end   = IRQ_TT_MFP_SCSI,
	},
};
#endif

int __init atari_platform_init(void)
{
	int rv = 0;

	if (!MACH_IS_ATARI)
		return -ENODEV;

#ifdef CONFIG_ATARI_ETHERNAT
	{
		unsigned char *enatc_virt;
		enatc_virt = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0xf);
		if (hwreg_present(enatc_virt)) {
			rv = platform_add_devices(atari_ethernat_devices,
						ARRAY_SIZE(atari_ethernat_devices));
		}
		iounmap(enatc_virt);
	}
#endif

#ifdef CONFIG_ATARI_ETHERNEC
	{
		int error;
		unsigned char *enec_virt;
		enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf);
		if (hwreg_present(enec_virt)) {
			error = platform_add_devices(atari_netusbee_devices,
						ARRAY_SIZE(atari_netusbee_devices));
			if (error && !rv)
				rv = error;
		}
		iounmap(enec_virt);
	}
#endif

#if IS_ENABLED(CONFIG_ATARI_SCSI)
	if (ATARIHW_PRESENT(ST_SCSI))
		platform_device_register_simple("atari_scsi", -1,
			atari_scsi_st_rsrc, ARRAY_SIZE(atari_scsi_st_rsrc));
	else if (ATARIHW_PRESENT(TT_SCSI))
		platform_device_register_simple("atari_scsi", -1,
			atari_scsi_tt_rsrc, ARRAY_SIZE(atari_scsi_tt_rsrc));
#endif

	return rv;
}

arch_initcall(atari_platform_init);